Metal/dielectric/metal sandwich film for broadband reflection reduction.
Ontology highlight
ABSTRACT:
SUBMITTER: Jen YJ
PROVIDER: S-EPMC3628165 | biostudies-other | 2013
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Optical diode-like effect has sparked growing interest in recent years due to its potential applications in integrated photonic systems. In this paper, we propose and numerically demonstrate a new type of easy-processing metal/dielectric cylinder composite grating on semi-sphere substrate, which can achieve high-contrast asymmetric transmission of unpolarized light for the sum of all diffraction modes in the entire visible region, and effectively guide the diffraction light transmitting out the substrate. The asymmetric light transmission (ALT) ratio is larger than 2?dB in the waveband from 380?nm to 780?nm and the maximum ALT ratio can reach to 13?dB at specified wavelengths. The thorough theoretical research reveals that the proposed metal/dielectric pillar composite grating structure, together with the substrate, can effectively excite localized surface plasmonic resonance (LSPR) effect and waveguide mode (WGM), and enlarge the diffraction difference between forward and backward transmission spaces, including both number of diffraction orders and diffraction efficiency, thus resulting in high-contrast broadband ALT phenomenon. In particular, lowering the symmetry of the grating can achieve polarization-dependent ALT. Such a type of easy-processing ALT device with high performance for both polarized and unpolarized light can be regarded as suitable candidates in practical applications.
| S-EPMC5772635 | biostudies-literature
Project description:To guide the design of plasmonic solar cells, theoretical investigation of core (metal)-shell (dielectric) nanoparticles for light absorption enhancement in thin film Si solar cells is performed. In contrast to the reported simulations and experimental results that rear-located surface plasmon on bare metallic nanoparticles is preferred, the core-shell nanoparticles demonstrate better performance when surface plasmon is located in front of a solar cell. This has been attributed to the enhanced forward scattering with vanishing backward scattering preserved over a wide spectral range in core-shell nanoparticles. This work provides a concept to achieve enhanced forward scattering with weakened backward scattering in plasmonic thin film solar cells.
| S-EPMC5550503 | biostudies-other
Project description:The integration of porous metal-organic frameworks onto the surface of materials, for use as functional devices, is currently emerging as a promising approach for gas sensing and flexible displays. However, research focused on potential applications in electronic devices is in its infancy. Here we present a facile strategy by which interpenetrated, crystalline metal-organic framework films are deposited onto conductive metal-plate anodes via in situ temperature-controlled electrochemical assembly. The nanostructure of the surface as well as the thickness and uniformity of the film are well controlled. More importantly, the resulting films exhibit enhanced dielectric properties compared to traditional inorganic or organic gate dielectrics. This study demonstrates the successful implementation of the rational design of metal-organic framework thin films on conductive supports with high-performance dielectric properties.
| S-EPMC4906389 | biostudies-literature
Project description:This paper presents a platform combining an inverse electromagnetic design computational method with additive manufacturing to design and fabricate all-dielectric metadevices. As opposed to conventional flat metasurface-based devices that are composed of resonant building blocks resulting in narrow band operation, the proposed design approach creates non-resonant, broadband (??/? up to >50%) metadevices based on low-index dielectric materials. High-efficiency (transmission >60%), thin (?2?) metadevices capable of polarization splitting, beam bending, and focusing are proposed. Experimental demonstrations are performed at millimeter-wave frequencies using 3D-printed devices. The proposed platform can be readily applied to the design and fabrication of electromagnetic and photonic metadevices spanning microwave to optical frequencies.
| S-EPMC5778146 | biostudies-literature
Project description:Metasurfaces offer a unique platform to precisely control optical wavefronts and enable the realization of flat lenses, or metalenses, which have the potential to substantially reduce the size and complexity of imaging systems and to realize new imaging modalities. However, it is a major challenge to create achromatic metalenses that produce a single focal length over a broad wavelength range because of the difficulty in simultaneously engineering phase profiles at distinct wavelengths on a single metasurface. For practical applications, there is a further challenge to create broadband achromatic metalenses that work in the transmission mode for incident light waves with any arbitrary polarization state. We developed a design methodology and created libraries of meta-units-building blocks of metasurfaces-with complex cross-sectional geometries to provide diverse phase dispersions (phase as a function of wavelength), which is crucial for creating broadband achromatic metalenses. We elucidated the fundamental limitations of achromatic metalens performance by deriving mathematical equations that govern the tradeoffs between phase dispersion and achievable lens parameters, including the lens diameter, numerical aperture (NA), and bandwidth of achromatic operation. We experimentally demonstrated several dielectric achromatic metalenses reaching the fundamental limitations. These metalenses work in the transmission mode with polarization-independent focusing efficiencies up to 50% and continuously provide a near-constant focal length over ??=?1200-1650?nm. These unprecedented properties represent a major advance compared to the state of the art and a major step toward practical implementations of metalenses.
| S-EPMC6220161 | biostudies-other
Project description:In this paper, we propose a simple design with an excellent performance to obtain high contrast in transmission asymmetry based on dielectric microspheres. Initially, we scrutinize the impact of the sphere radius on forward and backward transmissions. Afterward, by introducing a capping layer on top of the sphere, transmission response for the backward illuminated light will be blocked. In the next step, in order to replace the reflecting metal cap with a metal free absorbing design, we adopt a modeling approach based on the transfer matrix method (TMM) to explore an ideal material to achieve metal free perfect absorption in a multilayer configuration of material-insulator-material-insulator (MIMI). As a result of our investigations, it is found that Titanium Nitride (TiN) is an excellent alternative to replace metal in a MIMI multilayer stack. Setting this stack as the top capping coating, we obtain a high contrast between forward and backward light transmission where in an ultra-broadband range of 400 nm-1000?nm, forward transmission is above 0.85 while its backward response stays below 0.2. Moreover, due to the existence of multilayer stack, a high asymmetry is also observed for absorption profiles. This design has a relatively simple and large scale compatible fabrication route.
| S-EPMC5674040 | biostudies-literature
Project description:Examples are shown of protein crystallization in, and data collection from, solutions sandwiched between thin polymer films using vapour-diffusion and batch methods. The crystallization platform is optimal for both visualization and in situ data collection, with the need for traditional harvesting being eliminated. In wells constructed from the thinnest plastic and with a minimum of aqueous liquid, flash-cooling to 100 K is possible without significant ice formation and without any degradation in crystal quality. The approach is simple; it utilizes low-cost consumables but yields high-quality data with minimal sample intervention and, with the very low levels of background X-ray scatter that are observed, is optimal for microcrystals.
| S-EPMC4822989 | biostudies-literature
Project description:We report on the development of several different thin-film functional material systems prepared by radio frequency (RF) magnetron sputtering at Edith Cowan University nanofabrication labs. While focusing on the RF sputtering process optimizations for new or the previously underexplored material compositions and multilayer structures, we disclose several unforeseen material properties and behaviours. Among these are an unconventional magnetic hysteresis loop with an intermediate saturation state observed in garnet trilayers, and an ultrasensitive magnetic switching behaviour in garnet-oxide composites (GOC). We also report on the unusually high thermal exposure stability observed in some nanoengineered metal-dielectric multilayers. We communicate research results related to the design, prototyping, and practical fabrication of high-performance magneto-optic (MO) materials, oxide-based sensor components, and heat regulation coatings for advanced construction and solar windows.
| S-EPMC6829262 | biostudies-literature
Project description:We propose a compact nearfield scheme for fast and broadband dielectric characterization in the microwave region. An open-type circular probe operated in the high-purity TE01 mode was developed, showing a strongly confined fringing field at the open end. This fringing field directly probed the freestanding sheet sample, and the overall reflection was measured. Without sample-loading processes, both of the system assembling time and the risk of sample damage can be significantly reduced. In addition, the nearfield measurement substantially simplifies the calibration and the retrieval theory, facilitating the development of easy-to-integrate and easy-to-calibrate dielectric characterization technique. The dielectric properties of more than ten polymers were characterized from 30 GHz to 40 GHz. We believe that this work fulfills the requirement of the fast diagnostic in the industrial manufactures and also provides valuable high-frequency dielectric information for the designs of 5G devices.
| S-EPMC7565126 | biostudies-literature
Project description:Metasurfaces impart phase discontinuities on impinging electromagnetic waves that are typically limited to 0-2?. Here, we demonstrate that multiresonant metasurfaces can break free from this limitation and supply arbitrarily large, tunable time delays over ultrawide bandwidths. As such, ultrathin metasurfaces can act as the equivalent of thick bulk structures by emulating the multiple geometric resonances of three-dimensional systems that originate from phase accumulation with effective material resonances implemented on the surface itself via suitable subwavelength meta-atoms. We describe a constructive procedure for defining the required sheet admittivities of such metasurfaces. Importantly, the proposed approach provides an exactly linear phase response so that broadband pulses can experience the desired group delay without any distortion of the pulse shape. We focus on operation in reflection by exploiting an antimatching condition, satisfied by interleaved electric and magnetic Lorentzian resonances in the surface admittivities, which completely zeroes out transmission through the metasurface. As a result, the proposed metasurfaces can perfectly reflect a broadband pulse imparting a prescribed group delay. The group delay can be tuned by modifying the implemented resonances, thus opening up diverse possibilities in the temporal applications of metasurfaces.
| S-EPMC5865077 | biostudies-literature