Dataset Information

Immersion condensation on oil-infused heterogeneous surfaces for enhanced heat transfer.

ABSTRACT: Enhancing condensation heat transfer is important for broad applications from power generation to water harvesting systems. Significant efforts have focused on easy removal of the condensate, yet the other desired properties of low contact angles and high nucleation densities for high heat transfer performance have been typically neglected. In this work, we demonstrate immersion condensation on oil-infused micro and nanostructured surfaces with heterogeneous coatings, where water droplets nucleate immersed within the oil. The combination of surface energy heterogeneity, reduced oil-water interfacial energy, and surface structuring enabled drastically increased nucleation densities while maintaining easy condensate removal and low contact angles. Accordingly, on oil-infused heterogeneous nanostructured copper oxide surfaces, we demonstrated approximately 100% increase in heat transfer coefficient compared to state-of-the-art dropwise condensation surfaces in the presence of non-condensable gases. This work offers a distinct approach utilizing surface chemistry and structuring together with liquid-infusion for enhanced condensation heat transfer.

SUBMITTER: Xiao R

PROVIDER: S-EPMC3680863 | biostudies-other | 2013

REPOSITORIES: biostudies-other

ACCESS DATA

Publications

Immersion condensation on oil-infused heterogeneous surfaces for enhanced heat transfer.

Xiao Rong R Miljkovic Nenad N Enright Ryan R Wang Evelyn N EN

Scientific reports 20130101

Enhancing condensation heat transfer is important for broad applications from power generation to water harvesting systems. Significant efforts have focused on easy removal of the condensate, yet the other desired properties of low contact angles and high nucleation densities for high heat transfer performance have been typically neglected. In this work, we demonstrate immersion condensation on oil-infused micro and nanostructured surfaces with heterogeneous coatings, where water droplets nuclea ...[more]

PMID: 23759735

Similar Datasets

Project description:Enhancement in heat-transfer performance via dropwise condensation on superhydrophobic surfaces is much greater than that realized via generic condensation on a regular surface. However, if the supersaturation level during condensation increases above a specific value, water may seep to greater depths between structures. This may lead to attached condensation, which reduces condensation heat-transfer efficiency below that of ordinary surfaces. Therefore, it is critical to avoid the occurrence of supersaturation when superhydrophobic surfaces are employed in condenser design. The proposed study presents a simple method for regulating supersaturation on the laboratory scale. Experiments concerning droplet behavior on a superhydrophobic plate were performed to investigate droplet detachment and attachment in accordance with the surface and droplet temperatures. Results obtained have been represented as a ″droplet-behavior map″, which clearly depicts boundaries dividing the detachment and attachment regions. The supersaturation threshold obtained from the said map has been compared against results obtained from condensation heat-transfer experiments performed in an actual condenser environment. As observed, the two results demonstrate excellent agreement. Although superhydrophobicity of surfaces remains unchanged at room temperature, changes may occur in the extent of the supersaturation section, which improves condensation heat-transfer performance, depending on the surface-structure complexity. Therefore, droplet-behavior mapping has been used in this study to determine the available supersaturation section in accordance with the variation in surface roughness. Results confirm that the available supersaturation region increases with increasing surface roughness and structural complexity. Therefore, prior to applying superhydrophobicity to condensers, droplet-behavior mapping must be performed to avoid operation under the supersaturation conditions, which causes attached condensation.

Dataset Information

Immersion condensation on oil-infused heterogeneous surfaces for enhanced heat transfer.

Publications

Immersion condensation on oil-infused heterogeneous surfaces for enhanced heat transfer.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets