Dataset Information

Real time observation of X-ray-induced surface modification using simultaneous XANES and XEOL-XANES.

ABSTRACT: In experiments preliminary to the design of an X-ray-excited optical luminescence (XEOL)-based chemical mapping tool we have used X-ray micro (4.5 × 5.2 μm) and macro (1 × 6 mm) beams with similar total fluxes to assess the effects of a high flux density beam of X-rays at energies close to an absorption edge on inorganic surfaces in air. The near surface composition of corroded cupreous alloys was analyzed using parallel X-ray and optical photoemission channels to collect X-ray absorption near-edge structure (XANES) data at the Cu K edge. The X-ray fluorescence channel is characteristic of the composition averages over several micrometers into the surface, whereas the optical channel is surface specific to about 200 nm. While the X-ray fluorescence data were mostly insensitive to the X-ray dose, the XEOL-XANES data from the microbeam showed significant dose-dependent changes to the superficial region, including surface cleaning, changes in the oxidation state of the copper, and destruction of surface compounds responsible for pre-edge fluorescence or phosphorescence in the visible. In one case, there was evidence that the lead phase in a bronze had melted. Conversely, data from the macrobeam were stable over several hours. Apart from localized heating effects, the microbeam damage is probably associated with the O3 loading of the surface and increased reaction rate with atmospheric water vapor.

SUBMITTER: Adriaens A

PROVIDER: S-EPMC3805311 | biostudies-other | 2013 Oct

REPOSITORIES: biostudies-other

ACCESS DATA

Similar Datasets

Project description:The spontaneous crystal surface reconstruction of M-plane α-Al2O3 is employed for nanopatterning and nanofabrication in various fields of research including, among others, magnetism, superconductivity, and optoelectronics. In this reconstruction process the crystalline surface transforms from a planar morphology to one with a nanoscale ripple patterning. However, the high sample temperature required to induce surface reconstruction made in situ studies of the process seem unfeasible. The kinetics of ripple pattern formation therefore remained uncertain, and thus production of templates for nanofabrication could not advance beyond a trial-and-error stage. We present an approach combining in situ real-time grazing incidence small-angle X-ray scattering experiments (GISAXS) with model-based analysis and with ex situ atomic force microscopy (AFM) to observe this morphological transition in great detail. Our approach provides time-resolved information about all relevant morphological parameters required to trace the surface topography on the nanometer scale during reconstruction, i.e., the time dependence of the pattern wavelength, the ripple length, width, and height, and thus their facet angles. It offers a comprehensive picture of this process exemplified by a M-plane α-Al2O3 surface annealed at 1325 °C for 930 min. Fitting the model parameters to the experimental GISAXS data revealed a Johnson-Mehl-Avrami-Kolmogorov type of behavior for the pattern wavelength and a predominantly linear time dependence of the other parameters. In this case the reconstruction resulted in a crystalline surface fully patterned with asymmetric ripple-shaped nanostructures of 75 nm periodicity, 15 nm in height, and 630 nm in length. By elucidating the time dependence of these morphological parameters, this study shows a powerful way to significantly advance the predictability of annealing outcome and thus to efficiently customize nanopatterned α-Al2O3 templates for improved nanofabrication routines.

Dataset Information

Real time observation of X-ray-induced surface modification using simultaneous XANES and XEOL-XANES.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets