Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhanced thermoelectric performance of Nb-doped SrTiO3 by nano-inclusion with low thermal conductivity.

ABSTRACT: Authors reported an effective path to increase the electrical conductivity while to decrease the thermal conductivity, and thus to enhance the ZT value by nano-inclusions. By this method, the ZT value of Nb-doped SrTiO3 was enhanced 9-fold by yttria stabilized zirconia (YSZ) nano-inclusions. YSZ inclusions, located inside grain and in triple junction, can reduce the thermal conductivity by effective interface phonon scattering, enhance the electrical conductivity by promoting the abnormal grain growth, and thus lead to the obvious enhancement of ZT value, which strongly suggests that, it is possible to not only reduce the thermal conductivity, but also increase the electrical conductivity by nano-inclusions with low thermal conductivity. This study will give some useful enlightenment to the preparation of high-performance oxide thermoelectric materials.

SUBMITTER: Wang N

PROVIDER: S-EPMC3856403 | biostudies-other | 2013

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Enhanced Power Factor and Ultralow Lattice Thermal Conductivity Induced High Thermoelectric Performance of BiCuTeO/BiCuSeO Superlattice.

Project description:Based on the first-principles calculations, the electronic structure and transport properties of BiMChO (M=Cu and Ag, Ch=S, Se, and Te) superlattices have been studied. They are all semiconductors with indirect band gaps. The increased band gap and decreased band dispersion near the valence band maximum (VBM) lead to the lowest electrical conductivity and the lowest power factor for p-type BiAgSeO/BiCuSeO. The band gap value of BiCuTeO/BiCuSeO decreases because of the up-shifted Fermi level of BiCuTeO compared with BiCuSeO, which would lead to relatively high electrical conductivity. The converged bands near VBM can produce a large effective mass of density of states (DOS) without explicitly reducing the mobility µ for p-type BiCuTeO/BiCuSeO, which means a relatively large Seebeck coefficient. Therefore, the power factor increases by 15% compared with BiCuSeO. The up-shifted Fermi level leading to the band structure near VBM is dominated by BiCuTeO for the BiCuTeO/BiCuSeO superlattice. The similar crystal structures bring out the converged bands near VBM along the high symmetry points Γ-X and Z-R. Further studies show that BiCuTeO/BiCuSeO possesses the lowest lattice thermal conductivity among all the superlattices. These result in the ZT value of p-type BiCuTeO/BiCuSeO increasing by over 2 times compared with BiCuSeO at 700 K.

| S-EPMC10305665 | biostudies-literature

Enhanced thermoelectric properties of lightly Nb doped SrTiO3 thin films.

Project description:Novel thermoelectric materials developed for operation at room temperature must have similar or better performance along with being as ecofriendly as those commercially used, e.g., Bi2Te3, in terms of their toxicity and cost. In this work, we present an in-depth study of the thermoelectric properties of epitaxial Nb-doped strontium titanate (SrTi1-x Nb x O3) thin films as a function of (i) doping concentration, (ii) film thickness and (iii) substrate type. The excellent crystal quality was confirmed by high resolution transmission electron microscopy and X-ray diffraction analysis. The thermoelectric properties were measured by the three-omega method (thermal conductivity) and van der Pauw method (electrical resistivity), complemented by Seebeck coefficient measurements. A maximum power factor of 8.9 × 10-3 W m-1 K-2 and a thermoelectric figure of merit of 0.49 were measured at room temperature in 50 nm-thick films grown on lanthanum strontium aluminate. The mechanisms behind this high figure of merit are discussed in terms of a possible two-dimensional electron gas, increase of the effective mass of the electrons, electron filtering and change in strain due to different substrates. The overall enhancement of the thermoelectric properties suggests that SrTi1-x Nb x O3 is a very promising n-type candidate for room- to high-temperature applications.

| S-EPMC9419777 | biostudies-literature

Improved thermoelectric performance of Bi-deficient BiCuSeO material doped with Nb, Y, and P.

Project description:Thermoelectric materials convert waste heat into electric energy. Oxyselenide-based material, specifically, p-type BiCuSeO, is one of the most promising materials for these applications. There are numerous approaches to improve the heat-to-electricity conversion performance. Usually, these approaches are applied individually, starting from the pure intrinsic material. Higher performance could, however, be reached by combining a few strategies simultaneously. In the current work, yttrium, niobium, and phosphorous substitutions on the bismuth sites in already bismuth-deficient Bi1-xCuSeO systems were investigated via density functional theory. The bismuth-deficient system was used as the reference system for further introduction of substitutional defects. The substitution with phosphorous showed a decrease of up to 40 meV (11%) in the energy gap between conduction and valence bands at the highest substitution concentration. Doping with niobium led to the system changing from a p-type to an n-type conductor, which provides a possible route to obtain n-type BiCuSeO systems.

| S-EPMC8531848 | biostudies-literature

Effect of Nb concentration on the spin-orbit coupling strength in Nb-doped SrTiO3 epitaxial thin films.

Project description:Several oxide materials have attracted much interest for the application in spintronic devices due to unusual properties originating from the strongly correlated orbital and spin degrees of freedom. One missing part in oxide spintronics is a good spin channel featured by strong spin-orbit coupling (SOC) which enables an efficient control of the electron's spin. We have systematically investigated the dependence of the SOC strength of Sr(Nb x Ti1-x)O3 thin films on Nb concentration (nNb?=?2~20 at. %) as a deeper exploration of a recent finding of the strong SOC in a heavily Nb-doped SrTiO3 (Sr(Nb0.2Ti0.8)O3) epitaxial film. Apart from a finding of a proportionality of the SOC to nNb, we have observed an intriguing temperature dependence of the SOC strength and the anisotropic magnetoresistance (MR) in the intermediate nNb region. These phenomena are associated with the temperature dependence of Landé g-factor and the change of the band structure, which is consistent with the result of density functional theory (DFT) calculation.

| S-EPMC5893625 | biostudies-literature

Origins of Minimized Lattice Thermal Conductivity and Enhanced Thermoelectric Performance in WS2/WSe2 Lateral Superlattice.

Project description:We report a configuration strategy for improving the thermoelectric (TE) performance of two-dimensional transition metal dichalcogenide WS2 based on the experimentally prepared WS2/WSe2 lateral superlattice (LS) crystal. On the basis of density function theory combined with a Boltzmann transport equation, we show that the TE figure of merit zT of monolayer WS2 is remarkably enhanced when forming into a WS2/WSe2 LS crystal. This is primarily ascribed to the almost halved lattice thermal conductivity due to the enhanced anharmonic processes. Electronic transport properties parallel (xx) and perpendicular (yy) to the superlattice period are highly symmetric for both p- and n-doped LS owing to the nearly isotropic lifetime of charger carriers. The spin-orbital effect causes a significant split of conduction band and leads to three-fold degenerate sub-bands and high density of states (DOS), which offers opportunity to obtain a high n-type Seebeck coefficient (S). Interestingly, the separated degenerate sub-bands and upper conduction band in monolayer WS2 form a remarkable stair-like DOS, yielding a higher S. The hole carriers with much higher mobility than electrons reveal the high p-type power factor, and the potential to be good p-type TE materials with optimal zT exceeds 1 at 400 K in WS2/WSe2 LS.

| S-EPMC7992166 | biostudies-literature

Intrinsic nanostructure induced ultralow thermal conductivity yields enhanced thermoelectric performance in Zintl phase Eu2ZnSb2.

Project description:The Zintl thermoelectric phase Eu2ZnSb2 has a remarkable combination of high mobility and low thermal conductivity that leads to good thermoelectric performance. The key feature of this compound is a crystal structure that has a Zn-site with a 50% occupancy. Here we use comparison of experimental thermal conductivity measurements and first principles thermal conductivity calculations to characterize the thermal conductivity reduction. We find that partial ordering, characterized by local order, but Zn-site disorder on longer scales, leads to an intrinsic nanostructuring induced reduction in thermal conductivity, while retaining electron mobility. This provides a direction for identifying Zintl compounds with ultralow lattice thermal conductivity and good electrical conductivity.

| S-EPMC8481231 | biostudies-literature

Largely Suppressed Magneto-Thermal Conductivity and Enhanced Magneto-Thermoelectric Properties in PtSn4.

Project description:Highly conductive topological semimetals with exotic electronic structures offer fertile ground for the investigation of the electrical and thermal transport behavior of quasiparticles. Here, we find that the layer-structured Dirac semimetal PtSn4 exhibits a largely suppressed thermal conductivity under a magnetic field. At low temperatures, a dramatic decrease in the thermal conductivity of PtSn4 by more than two orders of magnitude is obtained at 9 T. Moreover, PtSn4 shows both strong longitudinal and transverse thermoelectric responses under a magnetic field. Large power factor and Nernst power factor of approximately 80-100 μW·cm-1·K-2 are obtained around 15 K in various magnetic fields. As a result, the thermoelectric figure of merit zT is strongly enhanced by more than 30 times, compared to that without a magnetic field. This work provides a paradigm for the decoupling of the electron and hole transport behavior of highly conductive topological semimetals and is helpful for developing topological semimetals for thermoelectric energy conversion.

| S-EPMC7166253 | biostudies-literature

Enhancement of thermoelectric properties of La-doped SrTiO3 bulk by introducing nanoscale porosity.

Project description:Electron-doped SrTiO3 is a well-known n-type thermoelectric material, although the figure of merit of SrTiO3 is still inferior compared with p-type metal oxide-based thermoelectric materials due to its high lattice thermal conductivity. In this study, we have used a different amount of the non-ionic surfactant F127 during sample preparation to introduce nanoscale porosities into bulk samples of La-doped SrTiO3. It has been observed that the porosities introduced into the bulk sample significantly improve the Seebeck coefficient and reduce the thermal conductivity by the charge carrier and phonon scattering respectively. Therefore, there is an overall enhancement in the power factor (PF) followed by a dimensionless figure of merit (zT) over a wide scale of temperature. The sample 20 at% La-doped SrTiO3 with 600 mg of F127 surfactant (SLTO 600F127) shows the maximum PF of 1.14 mW m-1 K-2 at 647 K which is 35% higher than the sample without porosity (SLTO 0F127), and the same sample (SLTO 600F127) shows the maximum value of zT is 0.32 at 968 K with an average enhancement of 62% in zT in comparison with the sample without porosity (SLTO 0F127).

| S-EPMC6837226 | biostudies-literature

Fabrication of Lignin-Based Nano Carbon Film-Copper Foil Composite with Enhanced Thermal Conductivity.

Project description:Technical lignin from pulping, an aromatic polymer with ~59% carbon content, was employed to develop novel lignin-based nano carbon thin film (LCF)-copper foil composite films for thermal management applications. A highly graphitized, nanoscale LCF (~80-100 nm in thickness) was successfully deposited on both sides of copper foil by spin coating followed by annealing treatment at 1000 °C in an argon atmosphere. The conditions of annealing significantly impacted the morphology and graphitization of LCF and the thermal conductivity of LCF-copper foil composite films. The LCF-modified copper foil exhibited an enhanced thermal conductivity of 478 W m-1 K-1 at 333 K, which was 43% higher than the copper foil counterpart. The enhanced thermal conductivity of the composite films compared with that of the copper foil was characterized by thermal infrared imaging. The thermal properties of the copper foil enhanced by LCF reveals its potential applications in the thermal management of advanced electronic products and highlights the potential high-value utility of lignin, the waste of pulping.

| S-EPMC6956031 | biostudies-literature

Enhanced Thermoelectric Performance of Cu₂SnSe₃-Based Composites Incorporated with Nano-Fullerene.

Project description:In this study, nano-sized fullerene C60 powder was sufficiently mixed with Cu₂SnSe₃ powder by ball milling method, and the C60/Cu₂SnSe₃ composites were prepared by spark plasma sintering technology. The fullerene C60 distributed uniformly in the form of clusters, and the average cluster size was less than 1 μm. With increasing C60 content, the electrical conductivity of C60/Cu₂SnSe₃ composites decreased, while the Seebeck coefficient was enhanced. The thermal conductivity of composites decreased significantly, which resulted from the phonon scattering by the C60 clusters located on the grain boundaries of the Cu₂SnSe₃ matrix. The highest figure of merit ZT of 0.38 was achieved at 700 K for 0.8% C60/Cu₂SnSe₃ composite.

| S-EPMC5509047 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data