Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Large and fast reversible Li-ion storages in Fe2O3-graphene sheet-on-sheet sandwich-like nanocomposites.

ABSTRACT: Fe2O3 nanosheets and nanoparticles are grown on graphene by simply varying reaction solvents in a facile solvothermal/hydrothermal preparation. Fe2O3 nanosheets are uniformly dispersed among graphene nanosheets, forming a unique sheet-on-sheet nanostructure. Due to the structure affinity between two types of two dimensional nanostructures, graphene nanosheets are separated better by Fe2O3 nanosheets compared to nanoparticles and their agglomeration is largely prevented. A large surface area of 173.9 m(2) g(-1) is observed for Fe2O3-graphene sheet-on-sheet composite, which is more than two times as large as that of Fe2O3-graphene particle-on-sheet composite (81.5 m(2) g(-1)). The sheet-on-sheet composite is found to be better suitable as an anode for Li-ion battery. A high reversible capacity of 662.4 mAh g(-1) can be observed after 100 cycles at 1000 mA g(-1). The substantially improved cycling performance is ascribed to the unique structure affinity between Fe2O3 nanosheets and graphene nanosheets, thus offering complementary property improvement.

SUBMITTER: Kan J

PROVIDER: S-EPMC3863982 | biostudies-other | 2013

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Ultralong Durability of Porous ?-Fe2O3 Nanofibers in Practical Li-Ion Configuration with LiMn2O4 Cathode.

Project description:Prelithiated, electrospun ?-Fe2O3 nanofibers display an exceptional cycleability when it is paired with commercial LiMn2O4 cathode in full-cell assembly. The performance of such ?-Fe2O3 nanofibers is mainly due to the presence of unique morphology with porous structure, appropriate mass balance, and working potential. Also, synthesis technique cannot be ruled out for the performance.

| S-EPMC5115360 | biostudies-literature

Fast Li-Ion Conduction in Spinel-Structured Solids.

Project description:Spinel-structured solids were studied to understand if fast Li+ ion conduction can be achieved with Li occupying multiple crystallographic sites of the structure to form a "Li-stuffed" spinel, and if the concept is applicable to prepare a high mixed electronic-ionic conductive, electrochemically active solid solution of the Li+ stuffed spinel with spinel-structured Li-ion battery electrodes. This could enable a single-phase fully solid electrode eliminating multi-phase interface incompatibility and impedance commonly observed in multi-phase solid electrolyte-cathode composites. Materials of composition Li1.25M(III)0.25TiO4, M(III) = Cr or Al were prepared through solid-state methods. The room-temperature bulk Li+-ion conductivity is 1.63 × 10-4 S cm-1 for the composition Li1.25Cr0.25Ti1.5O4. Addition of Li3BO3 (LBO) increases ionic and electronic conductivity reaching a bulk Li+ ion conductivity averaging 6.8 × 10-4 S cm-1, a total Li-ion conductivity averaging 4.2 × 10-4 S cm-1, and electronic conductivity averaging 3.8 × 10-4 S cm-1 for the composition Li1.25Cr0.25Ti1.5O4 with 1 wt. % LBO. An electrochemically active solid solution of Li1.25Cr0.25Mn1.5O4 and LiNi0.5Mn1.5O4 was prepared. This work proves that Li-stuffed spinels can achieve fast Li-ion conduction and that the concept is potentially useful to enable a single-phase fully solid electrode without interphase impedance.

| S-EPMC8124195 | biostudies-literature

Synthesis of Si/Fe2O3-Anchored rGO Frameworks as High-Performance Anodes for Li-Ion Batteries.

Project description:By virtue of the high theoretical capacity of Si, Si-related materials have been developed as promising anode candidates for high-energy-density batteries. During repeated charge/discharge cycling, however, severe volumetric variation induces the pulverization and peeling of active components, causing rapid capacity decay and even development stagnation in high-capacity batteries. In this study, the Si/Fe2O3-anchored rGO framework was prepared by introducing ball milling into a melt spinning and dealloying process. As the Li-ion battery (LIB) anode, it presents a high reversible capacity of 1744.5 mAh g-1 at 200 mA g-1 after 200 cycles and 889.4 mAh g-1 at 5 A g-1 after 500 cycles. The outstanding electrochemical performance is due to the three-dimensional cross-linked porous framework with a high specific surface area, which is helpful to the transmission of ions and electrons. Moreover, with the cooperation of rGO, the volume expansion of Si is effectively alleviated, thus improving cycling stability. The work provides insights for the design and preparation of Si-based materials for high-performance LIB applications.

| S-EPMC8539548 | biostudies-literature

Reversible Bending Behaviors of Photomechanical Soft Actuators Based on Graphene Nanocomposites.

Project description:Photomechanical nanocomposites embedded with light-absorbing nanoparticles show promising applications in photoresponsive actuations. Near infrared (nIR)-responsive nanocomposites based photomechanical soft actuators can offer lightweight functional and underexploited entry into soft robotics, active optics, drug delivery, etc. A novel graphene-based photomechanical soft actuators, constituted by Polydimethylsiloxane (PDMS)/graphene-nanoplatelets (GNPs) layer (PDMS/GNPs) and pristine PDMS layer, have been constructed. Due to the mismatch of coefficient of thermal expansion of two layers induced by dispersion of GNPs, controllable and reversible bendings response to nIR light irradiation are observed. Interestingly, two different bending behaviors are observed when the nIR light comes from different sides, i.e., a gradual single-step photomechanical bending towards PDMS/GNPs layer when irradiation from PDMS side, while a dual-step bending (finally bending to the PDMS/GNPs side but with an strong and fast backlash at the time of light is on/off) when irradiation from PDMS/GNPs side. The two distinctive photomechanical bending behaviors are investigated in terms of heat transfer and thermal expansion, which reveals that the distinctive bending behaviors can be attributed to the differences in temperature gradients along the thickness when irradiation from different sides. In addition, the versatile photomechanical bending properties will provide alternative way for drug-delivery, soft robotics and microswitches, etc.

| S-EPMC4893616 | biostudies-literature

Free-standing Fe2O3 nanomembranes enabling ultra-long cycling life and high rate capability for Li-ion batteries.

Project description:With Fe2O3 as a proof-of-concept, free-standing nanomembrane structure is demonstrated to be highly advantageous to improve the performance of Li-ion batteries. The Fe2O3 nanomembrane electrodes exhibit ultra-long cycling life at high current rates with satisfactory capacity (808 mAh g(-1) after 1000 cycles at 2 C and 530 mAh g(-1) after 3000 cycles at 6 C) as well as repeatable high rate capability up to 50 C. The excellent performance benefits particularly from the unique structural advantages of the nanomembranes. The mechanical feature can buffer the strain of lithiation/delithiation to postpone the pulverization. The two-dimensional transport pathways in between the nanomembranes can promote the pseudo-capacitive type storage. The parallel-laid nanomembranes, which are coated by polymeric gel-like film and SEI layer with the electrolyte in between layers, electrochemically behave like numerous "mini-capacitors" to provide the pseudo-capacitance thus maintain the capacity at high rate.

| S-EPMC4264016 | biostudies-literature

Synthesis of Sodium Cobalt Fluoride/Reduced Graphene Oxide (NaCoF3/rGO) Nanocomposites and Investigation of Their Electrochemical Properties as Cathodes for Li-Ion Batteries.

Project description:In this study, sodium cobalt fluoride (NaCoF3)/reduced graphene oxide (NCF/rGO) nanocomposites were fabricated through a simple one-pot solvothermal process and their electrochemical performance as cathodes for Li-ion batteries (LIBs) was investigated. The NCF nanoclusters (NCs) on the composites (300-500 nm in size) were formed by the assembly of primary nanoparticles (~20 nm), which were then incorporated on the surface of rGO. This morphology provided NCF NCs with a large surface area for efficient ion diffusion and also allowed for close contact with the conductive matrix to promote rapid electron transfer. As a cathode for LIBs, the NCF/rGO electrode achieved a high reversible capacity of 465 mAh·g-1 at 20 mA·g-1 via the conversion reaction, and this enhancement represented more than five times the reversible capacity of the bare NCF electrode. Additionally, the NCF/rGO electrode exhibited both better specific capacity and cyclability within the current density testing range (from 20 to 200 mA·g-1), compared with those of the bare NCF electrode.

| S-EPMC7865758 | biostudies-literature

Reversible superconductor-insulator transition in LiTi2O4 induced by Li-ion electrochemical reaction.

Project description:Transition metal oxides display various electronic and magnetic phases such as high-temperature superconductivity. Controlling such exotic properties by applying an external field is one of the biggest continuous challenges in condensed matter physics. Here, we demonstrate clear superconductor-insulator transition of LiTi2O4 films induced by Li-ion electrochemical reaction. A compact electrochemical cell of pseudo-Li-ion battery structure is formed with a superconducting LiTi2O4 film as an anode. Li content in the film is controlled by applying a constant redox voltage. An insulating state is achieved by Li-ion intercalation to the superconducting film by applying reduction potential. In contrast, the superconducting state is reproduced by applying oxidation potential to the Li-ion intercalated film. Moreover, superconducting transition temperature is also recovered after a number of cycles of Li-ion electrochemical reactions. This complete reversible transition originates in difference in potentials required for deintercalation of initially contained and electrochemically intercalated Li(+) ions.

| S-EPMC4635382 | biostudies-literature

Enhanced antibacterial activity of silver nanoparticles/halloysite nanotubes/graphene nanocomposites with sandwich-like structure.

Project description:A sandwich-like antibacterial reagent (Ag/HNTs/rGO) was constructed through the direct growth of silver nanoparticles on the surface graphene-based HNTs nanosheets. Herein, various nanomaterials were combined by adhesion effect of DOPA after self-polymerization. Ag/HNTs/rGO possess enhanced antibacterial ability against E. coli and S. aureus compared with individual silver nanoparticles, rGO nanosheets or their nanocomposites.

| S-EPMC3983607 | biostudies-other

CoFe2O4-Graphene Nanocomposites Synthesized through An Ultrasonic Method with Enhanced Performances as Anode Materials for Li-ion Batteries.

Project description:CoFe2O4-graphene nanocomposites (CoFe2O4-GNSs) have been synthesized through an ultrasonic method combined with calcination process. The nanocomposite calcinated at 350 °C shows better rate capabilities, e.g., 696, 495, 308, and 254 mAh g-1 at 1, 2, 5, and 10 A g-1, respectively.

| S-EPMC6223971 | biostudies-literature

Photocatalytic Efficiency of g-C3N4/Graphene Nanocomposites in the Photo-Assisted Charging of the Li-Ion Oxygen Battery.

Project description:In this work, we aimed to synthesize an effective nanocomposite photocatalyst for the photo-assisted charging of the Li-ion oxygen battery. Initially the graphene films were synthesized by chemical vapor deposition, and subsequently, g-C3N4/graphene nanocomposites were synthesized by thermal reduction as photocatalysts. FTIR spectra analysis showed that novel C=C bonds can form between g-C3N4 and graphene films during the synthesis process. The photocurrent measurements indicated that the presence of graphene considerably contributed to the visible light utilization and photocatalytic efficiency of g-C3N4. This contribution was also revealed by the UV-vis diffuse reflectance spectra measurements, which showed that the incremental addition of the graphene reduced the optical band gap of the nanocomposite incrementally. The photocatalyst performance of the g-C3N4/graphene nanocomposite was also observed in the photo-assisted charging tests of the Li-ion oxygen battery, and the presence of 2D graphene in the structure improved the effectiveness of g-C3N4 in the reduction of the charging potential, especially at high current densities.

| S-EPMC10702475 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data