Dataset Information

Segmental stiffness achieved by three types of fixation for unstable lumbar spondylolytic motion segments.

ABSTRACT: Objective The objective of this study was to compare the relative stability in lumbar spondylolysis (SP) of a rigid anterior plate (with a novel compression slot) versus traditional posterior pedicle screw (PS) fixation. Summary of Background Data Arthrodesis has been a mainstay of treatment for symptomatic isthmic spondylolisthesis in adults. Posterior PS fixation has become a commonly used adjunct. Some have advocated anterior lumbar interbody fixation (ALIF) plate as an alternative. The relative stability afforded by ALIF in SP has not been well characterized, nor has the contribution afforded by a compression screw slot in an ALIF plate. Methods Calf spine segments were characterized in the normal state, after sectioning the pars (SP model), then after reconstruction with an interbody spacer and either PS/rods, or an ALIF plate, or both. Results ALIF plate conferred stability on the spondylolytic segment only comparable to that of the normal functional spinal unit (FSU). Posterior fixation was more stable than anterior fixation in all testing modes. Addition of an ALIF plate conferred a significant additional stability in those that already had posterior fixation. The utilization of an anterior compression screw conferred additional stability in extension testing only. Conclusions ALIF plate reconstruction in the setting of SP may not confer enough segmental stability to predictably encourage fusion beyond that of the uninstrumented intact FSU. The utilization of an integral compression screw in an ALIF plate may not confer clinically significant additional construct stability in SP.

SUBMITTER: Choma T

PROVIDER: S-EPMC3864461 | biostudies-other | 2012 Jun

REPOSITORIES: biostudies-other

ACCESS DATA

Similar Datasets

Project description:ObjectiveSurgical treatment with internal fixation, specifically percutaneous fixation with three cannulated compression screws (CCSs), is the preferred choice for young and middle-aged patients. The mechanical advantage of the optimal spatial configuration with three screws provides maximum dispersion and cortical support. We suspect that the spatial proportion of the oblique triangle configuration (OTC) in the cross-section of the femoral neck isthmus (FNI) may significantly improve shear and fatigue resistance of the fixed structure, thereby stabilizing the internal fixation system in femoral neck fracture (FNF). This study aims to explore the mechanical features of OTC and provide a mechanical basis for its clinical application.MethodsTwenty Sawbone femurs were prepared as Pauwels type III FNF models and divided equally into two fixation groups: OTC and inverted equilateral triangle configuration (IETC). Three 7.3 mm diameter cannulated compression screws (CCSs) were used for fixation. The specimens of FNF after screw internal fixation were subjected to static loading and cyclic loading tests, respectively, with five specimens for each test. Axial stiffness, 5 mm failure load, ultimate load, shear displacement, and frontal rotational angle of two fragments were evaluated. In the cyclic loading test, the load sizes were 700 N, 1400 N, and 2100 N, respectively, and the fracture end displacement was recorded. Results were presented as means ± SD. Data with normal distributions were compared by the Student's t test.ResultsIn the static loading test, the axial stiffness, ultimate load, shear displacement, and frontal rotational angle of two fragments were (738.64 vs. 620.74) N/mm, (2957.61 vs. 2643.06) N, (4.67 vs. 5.39) mm, and (4.01 vs. 5.52)° (p < 0.05), respectively. Comparison between the femoral head displacement after 10,000 cycles of 700N cyclic loading and total displacement after 20,000 cycles of 700-1400N cyclic loading showed the OTC group was less than the IETC group (p < 0.05). A comparison of femoral head displacement after 10,000 cycles of 1400N and 2100N cycles and total displacement after 30,000 cycles of 700-2100N cycles showed the OTC group was less than another group, but the difference was not significant (p > 0.05).ConclusionWhen three CCSs are inserted in parallel to fix FNF, the OTC of three screws has obvious biomechanical advantages, especially in shear resistance and early postoperative weight-bearing, which provides a mechanical basis for clinical selection of ideal spatial configuration for unstable FNF.

Dataset Information

Segmental stiffness achieved by three types of fixation for unstable lumbar spondylolytic motion segments.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets