Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Revealing the role of catalysts in carbon nanotubes and nanofibers by scanning transmission X-ray microscopy.

ABSTRACT: The identification of effective components on the atomic scale in carbon nanomaterials which improve the performance in various applications remains outstanding challenges. Here the catalyst residues in individual carbon nanotube (CNT) and carbon nanofiber (CNF) were clearly imaged with a concurrent characterization of their electronic structure by nanoscale scanning transmission X-ray microscopy. Except for prominent catalyst nanoparticle at the tip, tiny catalyst clusters along the tube (fiber) were detected, indicating a migration of the catalysts with the growth of CNTs (CNFs). The observation provides the direct evidence on the atomic metal in CNT for oxygen reduction reported in the literature. Interaction between catalysts (Fe, Ni) and CNTs (CNFs) at the tip was also identified by comparing the X-ray absorption spectra. A deep understanding of catalyst residues such as Fe or Ni in carbon nanomaterials is very vital to growth mechanism development and practical applications.

SUBMITTER: Gao J

PROVIDER: S-EPMC3884223 | biostudies-other | 2014

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Scanning electrochemical microscopy of individual single-walled carbon nanotubes.

Project description:Here we report on the novel application of scanning electrochemical microscopy (SECM) to enable spatially resolved electrochemical characterization of individual single-walled carbon nanotubes (SWNTs). The feedback imaging mode of SECM was employed to detect a pristine SWNT (approximately 1.6 nm in diameter and approximately 2 mm in length) grown horizontally on a SiO(2) surface by chemical vapor deposition. The resulting image demonstrates that the individual nanotube under an unbiased condition is highly active for the redox reaction of ferrocenylmethyltrimethylammonium used as a mediator. Micrometer-scale resolution of the image is determined by the diameter of a disk-shaped SECM probe rather than by the nanotube diameter as assessed using 1.5 and 10 microm diameter probes. Interestingly, the long SWNT is readily detectable using the larger probe although the active SWNT covers only approximately 0.05% of the insulating surface just under the tip. This high sensitivity of the SECM feedback method is ascribed to efficient mass transport and facile electron transfer at the individual SWNT.

| S-EPMC2836802 | biostudies-literature

Revealing the assembly of filamentous proteins with scanning transmission electron microscopy.

Project description:Filamentous proteins are responsible for the superior mechanical strength of our cells and tissues. The remarkable mechanical properties of protein filaments are tied to their complex molecular packing structure. However, since these filaments have widths of several to tens of nanometers, it has remained challenging to quantitatively probe their molecular mass density and three-dimensional packing order. Scanning transmission electron microscopy (STEM) is a powerful tool to perform simultaneous mass and morphology measurements on filamentous proteins at high resolution, but its applicability has been greatly limited by the lack of automated image processing methods. Here, we demonstrate a semi-automated tracking algorithm that is capable of analyzing the molecular packing density of intra- and extracellular protein filaments over a broad mass range from STEM images. We prove the wide applicability of the technique by analyzing the mass densities of two cytoskeletal proteins (actin and microtubules) and of the main protein in the extracellular matrix, collagen. The high-throughput and spatial resolution of our approach allow us to quantify the internal packing of these filaments and their polymorphism by correlating mass and morphology information. Moreover, we are able to identify periodic mass variations in collagen fibrils that reveal details of their axially ordered longitudinal self-assembly. STEM-based mass mapping coupled with our tracking algorithm is therefore a powerful technique in the characterization of a wide range of biological and synthetic filaments.

| S-EPMC6924676 | biostudies-literature

Deactivation of Cu-Exchanged Automotive-Emission NH<sub>3</sub> -SCR Catalysts Elucidated with Nanoscale Resolution Using Scanning Transmission X-ray Microscopy.

Project description:To gain insight into the underlying mechanisms of catalyst durability for the selective catalytic reduction (SCR) of NOx with an ammonia reductant, we employed scanning transmission X-ray microscopy (STXM) to study Cu-exchanged zeolites with the CHA and MFI framework structures before and after simulated 135 000-mile aging. X-ray absorption near-edge structure (XANES) measurements were performed at the Al K- and Cu L-edges. The local environment of framework Al, the oxidation state of Cu, and geometric changes were analyzed, showing a multi-factor-induced catalytic deactivation. In Cu-exchanged MFI, a transformation of CuII to CuI and Cux Oy was observed. We also found a spatial correlation between extra-framework Al and deactivated Cu species near the surface of the zeolite as well as a weak positive correlation between the amount of CuI and tri-coordinated Al. By inspecting both Al and Cu in fresh and aged Cu-exchanged zeolites, we conclude that the importance of the preservation of isolated CuII sites trumps that of Brønsted acid sites for NH3 -SCR activity.

| S-EPMC7522683 | biostudies-literature

Time-of-arrival detection for time-resolved scanning transmission X-ray microscopy imaging.

Project description:A setup for time-resolved scanning transmission X-ray microscopy imaging is presented, which allows for an increase in the temporal resolution without the requirement of operating the synchrotron light source with low-α optics through the measurement of the time-of-arrival of the X-ray photons. Measurements of two filling patterns in hybrid mode of the Swiss Light Source are presented as a first proof-of-principle and benchmark for the performances of this new setup. From these measurements, a temporal resolution on the order of 20-30 ps could be determined.

| S-EPMC7467344 | biostudies-literature

Confocal soft X-ray scanning transmission microscopy: setup, alignment procedure and limitations.

Project description:Zone-plate-based scanning transmission soft X-ray microspectroscopy (STXM) is a well established technique for high-contrast imaging of sufficiently transparent specimens (e.g. ultrathin biological tissues, polymer materials, archaeometric specimens or magnetic thin films) with spatial resolutions in the regime of 20 nm and high spectroscopic or chemical sensitivity. However, due to the relatively large depth of focus of zone plates, the resolution of STXM along the optical axis so far stays unambiguously behind for thicker X-ray transparent specimens. This challenge can be addressed by the implementation of a second zone plate in the detection pathway of the beam, resulting in a confocal arrangement. Within this paper a first proof-of-principle study for a confocal STXM (cSTXM) and an elaborate alignment procedure in transmission and fluorescence geometry are presented. Based on first confocal soft X-ray micrographs of well known specimens, the advantage and limitation of cSTXM as well as further development potentials for future applications are discussed.

| S-EPMC4785861 | biostudies-other

Thermal stability of functionalized carbon nanotubes studied by in-situ transmission electron microscopy.

Project description:The thermal stability of funtionalized carbon nanotubes (CNTs) has been studied experimentally by direct in-situ observations using a heating stage in a transmission electron microscope, from room temperature (RT) to about 1000 °C. It was found that the thermal stability of the functionalized CNTs was significantly reduced during the in-situ heating process. Their average diameter dramatically expanded from RT to about 500 °C, and then tended to be stable until about 1000 °C. The X-ray energy dispersive spectroscopy analysis suggested that the diameter expansion was associated with coalescence of the carbon structure instead of deposition with additional foreign elements during the heating process.

| S-EPMC3182121 | biostudies-literature

Molecular interactions on single-walled carbon nanotubes revealed by high-resolution transmission microscopy.

Project description:The close solid-state structure-property relationships of organic π-aromatic molecules have attracted interest due to their implications for the design of organic functional materials. In particular, a dimeric structure, that is, a unit consisting of two molecules, is required for precisely evaluating intermolecular interactions. Here, we show that the sidewall of a single-walled carbon nanotube (SWNT) represents a unique molecular dimer platform that can be directly visualized using high-resolution transmission electron microscopy. Pyrene is chosen as the π-aromatic molecule; its dimer is covalently linked to the SWNT sidewalls by aryl addition. Reflecting the orientation and separation of the two molecules, the pyrene dimer on the SWNT exhibits characteristic optical and photophysical properties. The methodology discussed here—form and probe molecular dimers—is highly promising for the creation of unique models and provides indispensable and fundamental information regarding molecular interactions.

| S-EPMC4518305 | biostudies-literature

Structural colour of unary and binary colloidal crystals probed by scanning transmission X-ray microscopy and optical microscopy.

Project description:Colloidal crystals composed of micro- or nano- colloids have been investigated in various fields such as photonics due to their unique optical properties. Binary colloidal crystals have an outstanding potential for fine-tuning material properties by changing the components, concentration, or size of colloids. Because of their tunable optical, electrical, magnetic, and mechanical properties, those materials attracted great attention. However, it has been hard to elucidate internal structures without fluorescent labelling or cross-sectioning. Here, we demonstrate the structural analysis of not only unary but also binary colloidal crystals using scanning transmission x-ray microscopy and compare the results with colloidal structures and optical properties observed by optical microscopy. Based on the comparison of images obtained by these two methods, the domains of colloidal crystals consisting of different structures and colours were directly identified without any additional sample preparation. Therefore, it was possible to investigate the structural colours of local domains of unary and binary colloidal crystals such as the face centred cubic (FCC) structure with different orientations, that is FCC (111) and FCC (001), and hexagonal close-packed structure, HCP (0001).

| S-EPMC5622058 | biostudies-literature

Lignans in Knotwood of Norway Spruce: Localisation with Soft X-ray Microscopy and Scanning Transmission Electron Microscopy with Energy Dispersive X-ray Spectroscopy.

Project description:Lignans are bioactive compounds that are especially abundant in the Norway spruce (Picea abies L. Karst.) knotwood. By combining a variety of chromatographic, spectroscopic and imaging techniques, we were able to quantify, qualify and localise the easily extractable lignans in the xylem tissue. The knotwood samples contained 15 different lignans according to the gas chromatography-mass spectrometry analysis. They comprised 16% of the knotwood dry weight and 82% of the acetone extract. The main lignans were found to be hydroxymatairesinols HMR1 and HMR2. Cryosectioned and resin-embedded ultrathin sections of the knotwood were analysed with scanning transmission X-ray microscopy (STXM). Cryosectioning was found to retain only lignan residues inside the cell lumina. In the resin-embedded samples, lignan was interpreted to be unevenly distributed inside the cell lumina, and partially confined in deposits which were either readily present in the lumina or formed when OsO4 used in staining reacted with the lignans. Furthermore, the multi-technique characterisation enabled us to obtain information on the chemical composition of the structural components of knotwood. A simple spectral analysis of the STXM data gave consistent results with the gas chromatographic methods about the relative amounts of cell wall components (lignin and polysaccharides). The STXM analysis also indicated that a torus of a bordered pit contained aromatic compounds, possibly lignin.

| S-EPMC7411943 | biostudies-literature

Direct curvature measurement of the compartments in bamboo-shaped multi-walled carbon nanotubes via scanning probe microscopy.

Project description:Bamboo-shaped multi-walled carbon nanotubes (BS-MWCNTs) have compartmented structures inherently obtained during their catalytic growth, and the curvature of the compartmented structure is known to be determined by the morphology of the metal catalysts. In this study, the inside curvature of the BS-MWCNTs was directly measured through scanning probe microscopy (SPM). The surface of the compartment structures of BS-MWCNTs has discontinuous graphene layers and different frictional force levels depending on the curvature direction. That of the inside curvature can be directly observed through tribological analysis by adding and subtracting the lateral force microscopy images obtained on opposite sides along the axial direction of the BS-MWCNT (diameter of 500 nm). This tells us the direction of the inside curvature of the BS-MWCNT, which was also confirmed by identifying the growth direction of the BS-MWCNTs via scanning electron microscopy. Our demonstration implies that SPM can give the same insight into the structural characterization of nanomaterials that is relatively inexpensive and more user-friendly than currently used methods.

| S-EPMC7804926 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data