Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Fatigue degradation and electric recovery in Silicon solar cells embedded in photovoltaic modules.

ABSTRACT: Cracking in Silicon solar cells is an important factor for the electrical power-loss of photovoltaic modules. Simple geometrical criteria identifying the amount of inactive cell areas depending on the position of cracks with respect to the main electric conductors have been proposed in the literature to predict worst case scenarios. Here we present an experimental study based on the electroluminescence (EL) technique showing that crack propagation in monocrystalline Silicon cells embedded in photovoltaic (PV) modules is a much more complex phenomenon. In spite of the very brittle nature of Silicon, due to the action of the encapsulating polymer and residual thermo-elastic stresses, cracked regions can recover the electric conductivity during mechanical unloading due to crack closure. During cyclic bending, fatigue degradation is reported. This pinpoints the importance of reducing cyclic stresses caused by vibrations due to transportation and use, in order to limit the effect of cracking in Silicon cells.

SUBMITTER: Paggi M

PROVIDER: S-EPMC3968460 | biostudies-other | 2014

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Light and elevated temperature induced degradation and recovery of gallium-doped Czochralski-silicon solar cells.

Project description:The fast-firing step commonly applied at the end of solar cell production lines is known to trigger light-induced degradation effects on solar cells made on different silicon materials. In this study, we examine degradation phenomena on high-efficiency solar cells with poly-Si passivating contacts made on Ga-doped Czochralski-grown silicon (Cz-Si) base material under one-sun illumination at elevated temperatures ranging from 80 to 160 °C. The extent of degradation is demonstrated to increase with the applied temperature up to 140 °C. Above 140 °C, the degradation extent decreases with increasing temperature. The degradation of the energy conversion efficiency can be ascribed foremost to a reduction of the short-circuit current and the fill factor and to a lesser extent to a reduction of the open-circuit voltage. The extent of degradation at 140 °C amounts to 0.4%abs of the initial conversion efficiency of 22.1% compared to 0.15%abs at 80 °C. The extent of the efficiency degradation in the examined solar cells is significantly lower (by a factor of ~ 5) compared to solar cells made on B-doped Cz-Si wafers. Importantly, through prolonged illumination at elevated temperatures (e.g. 5 h, 1 sun, 140 °C), an improvement of the conversion efficiency by up to 0.2%abs compared to the initial value is achievable in combination with a permanent regeneration resulting in long-term stable conversion efficiencies above 22%.

| S-EPMC9110720 | biostudies-literature

Concrete embedded dye-synthesized photovoltaic solar cell.

Project description:This work presents the concept of a monolithic concrete-integrated dye-synthesized photovoltaic solar cell for optical-to-electrical energy conversion and on-site power generation. The transport measurements carried out in the dark revealed the presence of VOC of ~190 mV and ISC of ~9 μA, induced by the electrochemical conversion of concrete-supplied ionic impurities at the electrodes. The current-voltage measurements performed under illumination at incident optical powers of ~46 mW confirmed the generation of electrical power of ~0.64 μW with almost half generated via battery effect. This work presents a first step towards realizing the additional pathways to low-cost electrical power production in urban environments based on a combined use of organic dyes, nanotitania and concrete technology.

| S-EPMC3782884 | biostudies-other

UV Degradation and Recovery of Perovskite Solar Cells.

Project description:Although the power conversion efficiency of perovskite solar cells has increased from 3.81% to 22.1% in just 7 years, they still suffer from stability issues, as they degrade upon exposure to moisture, UV light, heat, and bias voltage. We herein examined the degradation of perovskite solar cells in the presence of UV light alone. The cells were exposed to 365 nm UV light for over 1,000 h under inert gas at <0.5 ppm humidity without encapsulation. 1-sun illumination after UV degradation resulted in recovery of the fill factor and power conversion efficiency. Furthermore, during exposure to consecutive UV light, the diminished short circuit current density (Jsc) and EQE continuously restored. 1-sun light soaking induced recovery is considered to be caused by resolving of stacked charges and defect state neutralization. The Jsc and EQE bounce-back phenomenon is attributed to the beneficial effects of PbI2 which is generated by the decomposition of perovskite material.

| S-EPMC5133559 | biostudies-literature

Titanium oxide nanomaterials as an electron-selective contact in silicon solar cells for photovoltaic devices

Project description:To obtain high conversion efficiency, various carrier-selective contact structures are being applied to the silicon solar cell, and many related studies are being conducted. We conducted research on TiO2 to create an electron-selective contact structure that does not require a high-temperature process. Titanium metal was deposited using a thermal evaporator, and an additional oxidation process was conducted to form titanium oxide. The chemical compositions and phases of the titanium dioxide layers were analyzed by X-ray diffraction. The passivation effects of each titanium oxide layer were measured using the quasi-steady-state photoconductance. In this study, the layer properties were analyzed when TiO2 had a passivation effect on the silicon surface. The charge and interface defect densities of the layer were analyzed through CV measurements, and the passivation characteristics according to the TiO2 phase change were investigated. As a result, by applying optimized TiO2 layer thickness and annealing temperature conditions through the experiment for passivation to the cell-like structure, which is the structure before metal and electrode formation, an implied open-circuit voltage (iVoc) of 630 mV and an emitter saturation current density (J0) value of 60.4 fA/cm2 were confirmed. Supplementary Information The online version contains supplementary material available at 10.1186/s11671-023-03803-x.

| S-EPMC10214925 | biostudies-literature

Photovoltaic Properties and Long-Term Durability of Porphyrin-Sensitized Solar Cells with Silicon-Based Anchoring Groups.

Project description:Anchoring groups for dye-sensitized solar cells (DSSCs) play a decisive role in high-power conversion efficiency (η) and long-term cell durability. To date, a carboxylic acid is the most widely used anchoring group for DSSCs. However, the carboxylic acid tends to dissociate from a TiO2 surface during the cell operation as well as in the presence of water. Considering that the dye dissociation from TiO2 leads to a decrease in the cell performance, stable anchoring groups are highly desirable to achieve long-term durability of DSSCs toward their practical application. In this study, we designed and synthesized a series of porphyrin dyes with the triethoxysilyl anchoring groups, ZnPSi1, ZnPSi2, and ZnPSi3, to evaluate the effects of the silicon-based anchoring group on cell durability and photovoltaic properties. The DSSCs based on ZnPSi1, ZnPSi2, and ZnPSi3 exhibited moderate η-values of 2.2, 4.7, and 2.3%, respectively. It is noteworthy that the η-value of the DSSC based on ZnPSi2 (4.7%) is the highest among DSSCs based on porphyrin dyes with silicon-based anchoring groups. The moderate η-values are mainly attributed to the low charge collection efficiency originating from the low surface coverage and plausible tilted geometry of the dyes on TiO2. More importantly, we demonstrated that the DSSC based on ZnPSi2 revealed higher long-term cell durability under illumination than that based on reference porphyrin YD2 -o -C8 having a conventional carboxylic acid anchoring group.

| S-EPMC6645028 | biostudies-literature

Layer-by-Layer Organic Photovoltaic Solar Cells Using a Solution-Processed Silicon Phthalocyanine Non-Fullerene Acceptor.

Project description:Silicon phthalocyanines (SiPcs) are promising, inexpensive, and easy to synthesize non-fullerene acceptor (NFA) candidates for all-solution sequentially processed layer-by-layer (LbL) organic photovoltaic (OPV) devices. Here, we report the use of bis(tri-n-butylsilyl oxide) SiPc ((3BS)2-SiPc) paired with poly(3-hexylthiophene) (P3HT) and poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione))] (PBDB-T) donors in an LbL OPV structure. Using a direct architecture, P3HT/(3BS)2-SiPc LbL devices show power conversion efficiencies (PCEs) up to 3.0%, which is comparable or better than the corresponding bulk heterojunction (BHJ) devices with either (3BS)2-SiPc or PC61BM. PBDB-T/(3BS)2-SiPc LbL devices resulted in PCEs up to 3.3%, with an impressive open-circuit voltage (V oc) as high as 1.06 V, which is among the highest V oc obtained employing the LbL approach. We also compared devices incorporating vanadium oxide (VOx) or poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) as a hole transporting layer and found that VOx modified the donor layer morphology and led to improved V oc. Probing the composition as a function of film layer depths revealed a similar distribution of active material for both BHJ and LbL structures when using (3BS)2-SiPc as an NFA. These findings suggest that (3BS)2-SiPc is a promising NFA that can be processed using the LbL technique, an inherently easier fabrication methodology for large-area production of OPVs.

| S-EPMC8908506 | biostudies-literature

Intermediate-band dynamics of quantum dots solar cell in concentrator photovoltaic modules.

Project description:We report for the first time a successful fabrication and operation of an InAs/GaAs quantum dot based intermediate band solar cell concentrator photovoltaic (QD-IBSC-CPV) module to the IEC62108 standard with recorded power conversion efficiency of 15.3%. Combining the measured experimental results at Underwriters Laboratory (UL®) licensed testing laboratory with theoretical simulations, we confirmed that the operational characteristics of the QD-IBSC-CPV module are a consequence of the carrier dynamics via the intermediate-band at room temperature.

| S-EPMC3999453 | biostudies-literature

Assessment of the energy recovery potential of waste Photovoltaic (PV) modules.

Project description:Global exponential increase in levels of Photovoltaic (PV) module waste is an increasing concern. The purpose of this study is to investigate if there is energy value in the polymers contained within first-generation crystalline silicon (c-Si) PV modules to help contribute positively to recycling rates and the circular economy. One such thermochemical conversion method that appeals to this application is pyrolysis. As c-Si PV modules are made up of glass, metal, semiconductor and polymer layers; pyrolysis has potential not to promote chemical oxidation of any of these layers to help aid delamination and subsequently, recovery. Herein, we analysed both used polymers taken from a deconstructed used PV module and virgin-grade polymers prior to manufacture to determine if any properties or thermal behaviours had changed. The calorific values of the used and virgin-grade Ethylene vinyl acetate (EVA) encapsulant were found to be high, unchanged and comparable to that of biodiesel at 39.51 and 39.87 MJ.Kg-1, respectively. This result signifies that there is energy value within used modules. As such, this study has assessed the pyrolysis behaviour of PV cells and has indicated the energy recovery potential within the used polymers found in c-Si PV modules.

| S-EPMC6437152 | biostudies-literature

Aluminium alloyed iron-silicide/silicon solar cells: A simple approach for low cost environmental-friendly photovoltaic technology.

Project description:This work demonstrates the fabrication of silicide/silicon based solar cell towards the development of low cost and environmental friendly photovoltaic technology. A heterostructure solar cells using metallic alpha phase (?-phase) aluminum alloyed iron silicide (FeSi(Al)) on n-type silicon is fabricated with an efficiency of 0.8%. The fabricated device has an open circuit voltage and fill-factor of 240 mV and 60%, respectively. Performance of the device was improved by about 7 fold to 5.1% through the interface engineering. The ?-phase FeSi(Al)/silicon solar cell devices have promising photovoltaic characteristic with an open circuit voltage, short-circuit current and a fill factor (FF) of 425 mV, 18.5 mA/cm(2), and 64%, respectively. The significant improvement of ?-phase FeSi(Al)/n-Si solar cells is due to the formation p(+-)n homojunction through the formation of re-grown crystalline silicon layer (~5-10 nm) at the silicide/silicon interface. Thickness of the regrown silicon layer is crucial for the silicide/silicon based photovoltaic devices. Performance of the ?-FeSi(Al)/n-Si solar cells significantly depends on the thickness of ?-FeSi(Al) layer and process temperature during the device fabrication. This study will open up new opportunities for the Si based photovoltaic technology using a simple, sustainable, and los cost method.

| S-EPMC4668570 | biostudies-literature

Assessing the Environmental Benefits of Extending the Service Lifetime of Solar Photovoltaic Modules.

Project description:Requiring no fuel for generation and negligible material/energy for operation and maintenance, photovoltaic (PV) systems have environmental impacts mostly due to the production of modules and the commissioning of power plants. Thus, extending the service lifetime of these systems from 30 to 40 years through an enhanced lamination process for module production potentially reduces environmental impacts per unit energy generated. Life cycle assessment is employed to evaluate the environmental impacts under scenarios for resource utilizations for the new lamination process, operation and maintenance requirements in the extended service lifetime, and degradation rates of the devised modules. Extending the service lifetime significantly reduces environmental impacts across categories, with a 21-27% reduction in global warming potential on the pessimistic and optimistic ends. At least 20% impact reduction is achieved in most impact categories, even under a pessimistic scenario. Considering uncertainty models in the life cycle inventories, samples are generated for scenarios via Monte Carlo simulation, and with significant improvements with large effects in most environmental impact categories, deterministic impact comparisons are supported by ANOVA and Tukey tests. Production strategies for more durable and reliable PV modules have a significant potential in contributing to global sustainability efforts.

| S-EPMC11316246 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data