Propagation mechanism of polymer optical fiber fuse.
Ontology highlight
ABSTRACT:
SUBMITTER: Mizuno Y
PROVIDER: S-EPMC3999446 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:We report an investigation of conditions for the initiation of fiber fuse (IFF), a kind of catastrophic damage that troubles all kinds of optical fibers, in silica-based optical fibers. The fibers of different chemical compositions were processed and tested in controlled conditions without mechanical damages before the IFF. For all the fibers of IFF, the same correlation between the critical temperatures and the optical powers transmitted therein was revealed for the first time. The fibers of different chemical compositions exhibited different resistances to the IFF under the threshold powers for propagation of fiber fuses. The results offered promise for predicting fiber fuses in optical fiber systems, which could facilitate avoiding catastrophic losses. They could direct the optimization of fiber production technologies for suppressing the damages, as well as open a new path towards controlled utilization of fiber fuse in in-fiber microstructure fabrication.
| S-EPMC6690914 | biostudies-literature
Project description:Although the numerous advantages of polymer optical fibers have been exploited in the fields of sensors and telecommunications, such fibers still experience a critical problem: the temperature dependency. Therefore, we explored the temperature-independent operation of a polymer fiber-optic evanescent wave sensor immersed in distilled water. We investigated variations in the surface morphology, deformation trajectory, refractive index, and weight of the fiber-sensing region with varying water temperature. We also examined the spectral transmission and transmitted light intensity of fibers subjected to a heating-cooling treatment. We observed that the light-transmission modes and sensitivity of the sensor were affected by changes in the surface morphology, diameter, and refractive index of the sensing region caused by changes in temperature. The transmitted light intensity of the sensor was maintained at a constant level after five cycles of the heating-cooling treatment, after which the fibers exhibited a smooth surface, low refractive index, and large fiber diameter. Consequently, we utilized the heating-cooling-treated fiber to realize a temperature-independent, U-shaped polymer fiber-optic evanescent wave sensor. The temperature independence was evaluated using glucose solutions in the range of 10 to 70 °C. The fabricated sensor showed significant temperature independence and high degree of consistency in measuring solutions.
| S-EPMC4481644 | biostudies-other
Project description:How local stresses propagate through polymeric fluids, and, more generally, how macromolecular dynamics give rise to viscoelasticity are open questions vital to wide-ranging scientific and industrial fields. Here, to unambiguously connect polymer dynamics to force response, and map the deformation fields that arise in macromolecular materials, we present Optical-Tweezers-integrating-Differential -Dynamic-Microscopy (OpTiDMM) that simultaneously imposes local strains, measures resistive forces, and analyzes the motion of the surrounding polymers. Our measurements with blends of ring and linear polymers (DNA) and their composites with stiff polymers (microtubules) uncover an unexpected resonant response, in which strain alignment, superdiffusivity, and elasticity are maximized when the strain rate is comparable to the entanglement rate. Microtubules suppress this resonance, while substantially increasing elastic storage, due to varying degrees to which the polymers buildup, stretch and flow along the strain path, and configurationally relax induced stress. More broadly, the rich multi-scale coupling of mechanics and dynamics afforded by OpTiDDM, empowers its interdisciplinary use to elucidate non-trivial phenomena that sculpt stress propagation dynamics-critical to commercial applications and cell mechanics alike.
| S-EPMC9440072 | biostudies-literature
Project description:Ultrafast optical switch based on plasmonic nanostructures has large application potentials in optical logic circuits and optical communication systems. Integration of plasmonic optical switching devices with optical fibers is a breakthrough for realizing practical applications in long-range optical data transmission or communication techniques. Here, the incorporation of plasmonic optical switch devices onto the end facets of optical fibers is reported, so that the switched optical signals are generated by interaction between femtosecond laser pulses and plasmonic nanostructures on one end of the fiber, and are delivered via the fiber waveguide to the other end for detection or decoding. "Quenching" of localized surface plasmon in the gold nanowires by its interaction with band-edge modulation in gold through strong optical excitation is the responsible photophysics. This work accomplishes for the first time the implementation of ultrafast plasmonic optical switch device on optical fiber tips for logic data transmission.
| S-EPMC8132049 | biostudies-literature
Project description:The intensified pursuit for lightweight solutions in the commercial vehicle industry increases the demand for method development of more advanced lightweight materials such as Carbon-Fiber-Reinforced Composites (CFRP). The behavior of these anisotropic materials is challenging to understand and manufacturing defects could dramatically change the mechanical properties. Voids are one of the most common manufacturing defects; they can affect mechanical properties and work as initiation sites for damage. It is essential to know the micromechanical composition of the material to understand the material behavior. Void characterization is commonly conducted using optical microscopy, which is a reliable technique. In the current study, an approach based on optical microscopy, statistically characterizing a CFRP laminate with regard to porosity, is proposed. A neural network is implemented to efficiently segment micrographs and label the constituents: void, matrix, and fiber. A neural network minimizes the manual labor automating the process and shows great potential to be implemented in repetitive tasks in a design process to save time. The constituent fractions are determined and they show that constituent characterization can be performed with high accuracy for a very low number of training images. The extracted data are statistically analyzed. If significant differences are found, they can reveal and explain differences in the material behavior. The global and local void fraction show significant differences for the material used in this study and are good candidates to explain differences in material behavior.
| S-EPMC9572467 | biostudies-literature
Project description:We report on the first demonstration of a proof-of-principle optical fiber 'meta-tip', which integrates a phase-gradient plasmonic metasurface on the fiber tip. For illustration and validation purposes, we present numerical and experimental results pertaining to various prototypes implementing generalized forms of the Snell's transmission/reflection laws at near-infrared wavelengths. In particular, we demonstrate several examples of beam steering and coupling with surface waves, in fairly good agreement with theory. Our results constitute a first step toward the integration of unprecedented (metasurface-enabled) light-manipulation capabilities in optical-fiber technology. By further enriching the emergent 'lab-on-fiber' framework, this may pave the way for the widespread diffusion of optical metasurfaces in real-world applications to communications, signal processing, imaging and sensing.
| S-EPMC6062173 | biostudies-literature
Project description:FUBP-interacting repressor (FIR) is a suppressor of transcription of the proto-oncogene MYC. FIR binds to the far upstream element (FUSE) of the MYC promoter. Competition of FIR with FUSE-binding protein 1 (FUBP1) is a key mechanism of MYC transcriptional regulation. To gain insights into the structural mechanisms regulating FIR DNA interaction, we determined the crystal structure of two FIR RRM domains (RRM1-2) with single-stranded FUSE DNA sequences. These structures revealed an ability of the RRM domain to recognize diverse FUSE regions through distinct intermolecular interactions and binding modes. Comparative structural analyses against available RRM-ssDNA/RNA complexes showed that the nucleotide configurations in FIR were similar to those in other RRMs that harbour a tyrosine at the conserved aromatic position in the RNP2 motif (Y-type RRM), but not those with a phenylalanine (F-type RRM). Site-directed mutagenesis experiments demonstrated that a single substitution, Y115F, altered the binding affinities of oligonucleotides to FIR RRM, suggesting an important role of this conserved aromatic residue in ssDNA/RNA interactions. Our study provides the structural basis for further mechanistic studies on this important protein-DNA interaction.
| S-EPMC10229228 | biostudies-literature
Project description:Bacterial biofilms are one of the most important challenges that modern medicine faces due to the difficulties of diagnosis, antibiotic resistance, and protective mechanisms against aggressive environments. For these reasons, methods that ensure the inexpensive and rapid or real-time detection of biofilm formation on medical devices are needed. This study examines the possibilities of using optical- and fiber-based biosensors to detect and analyze early bacterial biofilms. In this study, the biofilm-forming model organism Pseudomonas aeruginosa was inoculated on the surface of the optical sensor and allowed to attach for 2 h. The biosensors were made by a fiber-tip ball resonator, fabricated through a CO2 laser splicer on a single-mode fiber, forming a weak reflective spectrum. An optical backscatter reflectometer was used to measure the refractive index detected by the sensors during different growth periods. The early biofilm concentration was determined by crystal violet (CV) binding assay; however, such a concentration was lower than the detection limit of this assay. This work presents a new approach of biofilm sensing in the early attachment stage with a low limit of detection up to 10-4 RIU (refractive index units) or 35 ± 20 × 103 CFU/mL (colony formed units).
| S-EPMC9313161 | biostudies-literature
Project description:A generic three-stage stack-and-draw method is demonstrated for the fabrication of complex-microstructured optical fibers. We report the fabrication and characterization of a silica superlattice microstructured fiber with more than 800 rhomboidally arranged air-holes. A polarization-maintaining fiber with a birefringence of 8.5 × 10-4 is demonstrated. The birefringent property of the fiber is found to be highly insensitive to external environmental effects, such as pressure.
| S-EPMC5455932 | biostudies-other
Project description:Since the dawn of time, or at least the dawn of recombinant DNA technology (which for many of today's scientists is the same thing), investigators have been cloning and expressing heterologous proteins in a variety of different cells for a variety of different reasons. These range from cell biological studies looking at protein-protein interactions, post-translational modifications, and regulation, to laboratory-scale production in support of biochemical, biophysical, and structural studies, to large scale production of potential biotherapeutics. In parallel, fusion-tag technology has grown-up to facilitate microscale purification (pull-downs), protein visualization (epitope tags), enhanced expression and solubility (protein partners, e.g., GST, MBP, TRX, and SUMO), and generic purification (e.g., His-tags, streptag, and FLAG™-tag). Frequently, these latter two goals are combined in a single fusion partner. In this review, we examine the most commonly used fusion methodologies from the perspective of the ultimate use of the tagged protein. That is, what are the most commonly used fusion partners for pull-downs, for structural studies, for production of active proteins, or for large-scale purification? What are the advantages and limitations of each? This review is not meant to be exhaustive and the approach undoubtedly reflects the experiences and interests of the authors. For the sake of brevity, we have largely ignored epitope tags although they receive wide use in cell biology for immunopreciptation.
| S-EPMC3831663 | biostudies-literature