A new total wrist fusion locking plate for patients with small hands or with failed partial wrist fusion: preliminary experience.
Ontology highlight
ABSTRACT:
SUBMITTER: del Pino JG
PROVIDER: S-EPMC4026985 | biostudies-other | 2014 May
REPOSITORIES: biostudies-other
Similar Datasets
Project description:A retrograde nail with posterior-to-anterior (PA) locking into os calcis, talus and tibia was used to correct deformity and achieve fusion after failed fusion. A variety of methods have been published to achieve union of the ankle and subtalar joint in a failed fusion situation. We have studied a retrograde locking nail technique through a 2.5-cm incision in the non-weightbearing part of the sole of the foot. Remaining cartilage in the ankle joint, where necessary, was percutaneously removed through an anterior approach and the locking nail was inserted after reaming of os calcis, talus and tibia. Locking screw insertion was in the sagittal plane (p.a. direction), in talus os calcis and tibial diaphysis using a nail mounted jig. Ten patients were entered in the study (age 27-60 years). The initial aetiology for attempted fusion was post-traumatic in nine cases and rheumatic in one case. There were 25 previous operations in the cohort not leading to fusion. An additional temporary external fixator was used in four cases to reach and maintain the optimum position for the procedure. The intervention time was 30-75 min. Dynamisation of the nail was performed after four months under local anaesthesia. The mean duration of follow-up was 4 years (3-5.5 years). Radiologically and clinically, fusion was achieved in 16 weeks (range, 12-20 weeks). There was no loosening of the implant or implant failure. A leg length discrepancy was avoided using this technique. There was one complication with varus malunion in a heavy smoker which united after corrective osteotomy, revision nailing and bone grafting. Patient satisfaction was measured on a scale (not visual analogue) of 0 (not satisfied) to 10 (completely satisfied); overall satisfaction averaged 9.5 points (range, 6-10 points). The postoperative ankle-hindfoot score of the American Orthopedic Foot and Ankle Society averaged 73.5 points (range, 61-81 points). Retrograde locked nailing with locking in the sagittal plane is a reliable minimally invasive procedure to achieve fusion of the ankle and the subtalar joint after failed fusion.
| S-EPMC2321722 | biostudies-other
Project description:BackgroundTarsometatarsal (TMT) arthrodesis is a common operative procedure for end-stage arthritis of the TMT joints. To date, there is no consensus on the best fixation technique for TMT arthrodesis and which joints should be included.MethodsThirty fresh-frozen feet were divided into one group (15 feet) in which TMT joints I-III were fused with a lag screw and locking plate and a second group (15 feet) in which TMT joints I-III were fused with 2 crossing lag screws. The arthrodesis was performed stepwise with evaluation of mobility between the metatarsal and cuneiform bones after every application or removal of a lag screw or locking plate.ResultsIsolated lag-screw arthrodesis of the TMT I-III joints led to significantly increased stability in every joint (P < .05). Additional application of a locking plate caused further stability in every TMT joint (P < .05). An additional crossed lag screw did not significantly increase rigidity of the TMT II and III joints (P > .05). An IM screw did not influence the stability of the fused TMT joints. For TMT III arthrodesis, lag-screw and locking plate constructs were superior to crossed lag-screw fixation (P < .05). TMT I fusion does not support stability after TMT II and III arthrodesis.ConclusionEach fixation technique provided sufficient stabilization of the TMT joints. Use of a lag screw plus locking plate might be superior to crossed screw fixation. An additional TMT I and/or III arthrodesis did not increase stability of an isolated TMT II arthrodesis.Clinical relevanceWe report the first biomechanical evaluation of TMT I-III arthrodesis. Our results may help surgeons to choose among osteosynthesis techniques and which joints to include in performing arthrodesis of TMT I-III joints.
| S-EPMC8772252 | biostudies-literature
Project description:We present two case reports of successful primary shortening of the forearm and total wrist arthroplasty (TWA) using the new angle-stable Maestro Wrist Reconstructive System (WRS) for treatment of highly comminuted distal radius fracture in selected autonomous patients. In a 56-year-old male patient with adequate bone stock, insertion of the noncemented Maestro WRS was combined with ulnar shortening osteotomy. In an 84-year-old female patient with poor osteoporotic bone stock, insertion of the radial cemented Maestro WRS was combined with ulnar head resection. Both patients could resume their work without additional surgery after TWA. At the 1-year follow-up, there were no changes in position of either implant without signs of loosening, no impingement, and no instability of the distal radioulnar joint or the distal ulna stump. All clinical parameters (DASH score, pain through VAS, and grip strength) were satisfactory. Both patients reported that they would have the same procedure again. Further experience is needed to validate this concept.
| S-EPMC4603322 | biostudies-literature
Project description:BackgroundThe role of locking plate in lateral malleolar fracture fixation for the elderly remains unclear. The aim of our study is to compare radiological and functional outcomes in older patients (> 50 years) with AO/OTA 44B lateral malleolar fractures after locking plate (PLP) or one-third non-locking tubular plate (TP) lateral fixation.MethodsWe retrospectively reviewed the medical records of 72 patients (PLP group, 34 patients; TP group, 38 patients; mean age, 61.9 ± 7.6 years; range, 51-80 years; follow-up, 1 year). Patients with open fractures, syndesmosis injuries, and a previous ankle trauma or surgery were excluded. Demographic data, union rate, complications, radiographic outcomes, visual analog scale (VAS) scores, and foot and ankle outcome scores (FAOSs) between the groups were recorded and compared. We also investigated the association of clinical features with pain and function. Statistically, the Fisher's exact test was used for categorical variables and the Mann-Whitney U test for the continuous variables. The final model for the multiple regression analysis was used to predict factors related to functional outcomes.ResultsThere were no significant between-group differences in demographic data, complication rates, immediately postoperative distal fibula lengths, ankle osteoarthritis (OA) grades, talar tilt angles (TTAs) ≥ 2°, or reduction accuracy. All fractures achieved union. The PLP group had significantly lower rates of distal screw loosening, fibula shortening > 2 mm, OA grade progression, and TTAs ≥ 2°, and better FAOSs and VAS scores than was the case for the TP group after 1 year of follow-up (all p < 0.05). The severity of OA, TTA ≥ 2°, and distal screw loosening were positively associated with VAS scores, and negatively associated with FAOSs.ConclusionsWhen treating AO/OTA 44B fractures in patients over 50 years of age, PLPs provided better VAS scores, FAOSs, and radiological outcomes, including less fibula shortening > 2 mm, less osteoarthritic (OA) ankle progression, less implant removal rate, and fewer TTAs ≥ 2° than was the case for TPs after a 1-year follow-up.Level of evidenceTherapeutic level III.
| S-EPMC7082938 | biostudies-literature
Project description:The purpose of this study was to compare the clinical outcome, union rate, and complications of a consecutive series of Scaphoid excision and limited wrist arthrodesis performed by a single surgeon using distal radius bone graft and K-wires or circular plate fixation. A sequential series of ten patients(11 wrists) who were stabilized with temporary K-wires were compared to 11 patients (11 wrists) who were stabilized with a circular plate. Minimum follow-up was 1 year. One patient in the K-wire group was converted to a wrist fusion. Six of the remaining ten patients in the K-wire fixation group and 8 of the 11 patients in the circular plate fixation group returned for the following blinded evaluations: Quick DASH, analog pain scale, range of motion, grip and pinch strength, plain x-ray, and multi-detector computed tomography evaluation. One non-union occurred in the K-wire group. There were no non-unions in the circular plate fixation group. There was no difference in any of remaining measures or rate of complications. This study shows that equivalent results can be obtained using circular plate fixation compared to K-wires when equivalent bone graft source and fusion technique are used. If K-wire removal requires a return to the OR, circular plate fixation is more cost-effective.
| S-EPMC2525875 | biostudies-other
Project description:Background The etiologies and outcomes of cases of failed therapeutic wrist arthroscopy have not been well-described to date. Purpose The purposes of this study were to identify common preventable patterns of failure in wrist arthroscopy and to report outcomes of a series of revision arthroscopy cases. Patients and Methods Retrospective review of 237 wrist arthroscopies revealed 21 patients with a prior arthroscopy for the same symptoms, of which 16 were assessed by questionnaires and physical exam for this study. Results Six of sixteen patients (38%) had unrecognized dynamic ulnar impaction after débridement of triangular fibrocartilage complex (TFCC) tears, which resolved with arthroscopic wafer resection. Five (31%) had persistent distal radioulnar joint (DRUJ) instability after initial treatment of TFCC tears, requiring arthroscopic repair at revision. Four (25%) experienced diffuse dorsal wrist pain initially diagnosed as TFCC tears, but dynamic scapholunate ligament injuries were found and addressed with radiofrequency (RF) shrinkage at reoperation. Two (13%) required further resection of the radial styloid, after initial débridement was insufficient to correct radioscaphoid impingement. At a mean of 4.8 years after repeat arthroscopy (range, 1.5-13.4 years), this cohort had significant improvements in pain and satisfaction with outcomes after revision arthroscopy. Conclusions The most common indications for repeat wrist arthroscopy were ligamentous instability (of the DRUJ or scapholunate ligament) and osteoarthritis (from dynamic ulnar impaction or radioscaphoid impingement). Although revision wrist arthroscopy may yield acceptable outcomes, careful assessment of stability and cartilage wear at index procedure is crucial. Level IV Therapeutic.
| S-EPMC3922874 | biostudies-other
Project description:Fractures of the palate have defied conventional management, such that malrotation and disinclination of the palatal shelves occur in a significant number of patients after repair. The fractured palatal shelves of eight patients were first prealigned. To do so, one or more 205-mm ratchet clamps and two intermaxillary fixation (IMF) posts were used. Rigid fixation was then achieved by applying a 2.0-mm mini-locking titanium plate (across the palatal vault) and by applying an adaptation miniplate across the fracture line as it exited the anterior surface of the maxilla. Screws were passed directly through the mucoperiosteum, to engage the palatal shelves and to lock the locking plate into position. Lacerations in the mucoperiosteum were neither used to aid fixation nor used as portals for dissection; incisions and mucoperiosteal flaps in the palatal vault were avoided. Adjuncts, such as intraoral splints, have not been used in cases to date, and early mobilization was allowed. Reconstitution of the craniomaxillofacial buttresses was added in patients with more extensive maxillary injury. The palatal appliance and screws remained rigidly in position in the roof of the mouth, much like an external fixator, until their removal 8 to 12 weeks after the repair. No patient suffered erosion of the mucoperiosteum or other major morbidity, other than a transient fistula of the soft palate. The palatoalveolar segments remained in proper realignment and inclination, and pretraumatic occlusal patterns and the width and depth of the lower face appear to have been restored with one exception. The latter suffered a subtle posterolateral open bite that was corrected orthodontically. Prealignment of fractured palatal shelves with one or more large ratchet clamps and two IMF posts provides several points of forced reduction of the palatal shelves, along the dental arch. In addition, stabilization with mini-locking plate(s) in the palatal vault and an adaptation plate across the fracture line, as it exits the maxilla, appear to have merit, based on this preliminary report (n = 8). Outcomes seen on computed tomography and clinical examination during this 3-year experience have been favorable.
| S-EPMC3052730 | biostudies-other
Project description:The use of low-profile dorsal and volar locking plates for distal radial fracture surgery has improved results and lowered the complication rate compared with older plate designs. The purpose of the present randomized controlled trial was to compare patient-reported outcomes as well as radiographic and functional results between patients who underwent stabilization with a volar locking plate or a dorsal locking nail-plate for the treatment of dorsally displaced unstable extra-articular distal radial fractures. One hundred and twenty patients ≥55 years of age were randomized to surgery with either a volar locking plate or a dorsal locking nail-plate and were assessed at 2 weeks, 6 weeks, 3 months, 6 months, and 1 year. The primary outcome was the abbreviated version of the Disabilities of the Arm, Shoulder and Hand (QuickDASH) score. Secondary outcomes were the Patient-Rated Wrist Evaluation (PRWE), EuroQol 5 Dimensions (EQ-5D) index and visual analog scale (VAS), range of motion, grip strength, radiographic measurements, and complication rate. The median age was 66 years (range, 55 to 88 years). The rate of follow-up was 97%. There was no clinically important difference between the groups at any point during follow-up. Patients in the volar locking plate group had better mean QuickDASH scores at 6 weeks, 6 months, and 1 year. However, the differences were small (5.8 vs. 11.3 points at 1 year; mean difference, -5.5 points [95% confidence interval (CI), -9.9 to 1.2]; p = 0.014), which is lower than any proposed minimum clinically important difference (MCID). The difference in PRWE scores was also lower than the MCID (1.0 vs. 3.5 at 1 year; mean difference, -2.5 [95% CI, -4.4 to 0.6]; p = 0.012). The dorsal locking nail-plate group had slightly better restoration of volar tilt (p = 0.011). EQ-5D index, EQ-5D VAS, range of motion, grip strength, and complication rates were similar. We found no clinically relevant difference between the volar locking plate and dorsal locking nail-plate groups after 1 year or in the time period up to 1 year. A dorsal locking nail-plate can therefore be an alternative method for the treatment of these unstable fractures or in cases in which a dorsal approach is preferable over a volar approach. Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.
| S-EPMC8509916 | biostudies-literature
Project description:Treatment of severely destroyed rheumatoid wrists with total wrist arthroplasty or total wrist arthrodesis relies on patient and surgeon preferences rather than rigorous prospective outcomes data. The purpose of this study is to develop a decision analytic model of arthroplasty and arthrodesis in rheumatoid arthritis (RA) using utility values obtained from a random sample of hand surgeons.A utility survey using a time trade-off design was administered to 175 members of the American Society for Surgery of the Hand. Based on the results of the survey, the utility values that surgeons assign to health states associated with arthroplasty and arthrodesis and their complications were calculated. By combining utility values with complication rates in the published literature, we developed a decision tree to calculate the expected quality-adjusted life years (QALYs) for each procedure compared to living with a painful RA wrist.Based on surgeon preferences, living for 30 years with a painful, poorly functioning RA wrist (utility = 0.54) is associated with 16.2 QALYs. Treatment with arthroplasty (utility = 0.85) is associated with 25.5 QALYs, a gain of 9.3 QALYs over nonsurgical management. Arthrodesis (utility = 0.82) is associated with 24.6 QALYs, a gain of 8.4 QALYs over nonsurgical management. Arthroplasty is associated with a small incremental increase in QALYs (0.9) compared to arthrodesis.Based on utility scores, hand surgeons feel that living with a painful, poorly functioning RA wrist for 30 years is worth approximately half as many years with a painless, well-functioning wrist. The outcomes for arthroplasty and arthrodesis are valued more than nonsurgical management. On the basis of its higher expected gain in QALYs, arthroplasty should be the preferred treatment. The minimal increase in utility for arthroplasty over arthrodesis suggests however, that surgeons do not view arthroplasty as superior to arthrodesis.Economic and decision analysis IV.
| S-EPMC4410850 | biostudies-literature
Project description:Distal femoral varus osteotomy is a well-established procedure for the treatment of lateral compartment cartilage lesions and degenerative disease, correcting limb alignment and decreasing the progression of the pathology. Surgical techniques can be performed with a lateral opening-wedge or medial closing-wedge correction of the deformity. Fixation methods for lateral opening-wedge osteotomies are widely available, and there are various types of implants that can be used for fixation. However, there are currently only a few options of implants for fixation of a medial closing-wedge osteotomy on the market. This report describes a medial, supracondylar, V-shaped, closing-wedge distal femoral osteotomy using a locked anterolateral proximal tibial locking plate that fits anatomically to the medial side of the distal femur. This is a great option as a stable implant for a medial closing-wedge distal femoral osteotomy.
| S-EPMC4738638 | biostudies-literature