Wavelength-versatile graphene-gold film saturable absorber mirror for ultra-broadband mode-locking of bulk lasers.
Ontology highlight
ABSTRACT:
SUBMITTER: Ma J
PROVIDER: S-EPMC4031483 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Graphene, whose absorbance is approximately independent of wavelength, allows broadband light-matter interactions with ultrafast responses. The interband optical absorption of graphene can be saturated readily under strong excitation, thereby enabling scientists to exploit the photonic properties of graphene to realize ultrafast lasers. The evanescent field interaction scheme of the propagating light with graphene covered on a D-shaped fibre or microfibre has been employed extensively because of the nonblocking configuration. Obviously, most of the fibre surface is unused in these techniques. Here, we exploit a graphene-clad microfibre (GCM) saturable absorber in a mode-locked fibre laser for the generation of ultrafast pulses. The proposed all-surface technique can guarantee a higher efficiency of light-graphene interactions than the aforementioned techniques. Our GCM-based saturable absorber can generate ultrafast optical pulses within 1.5??m. This saturable absorber is compatible with current fibre lasers and has many merits such as low saturation intensities, ultrafast recovery times, and wide wavelength ranges. The proposed saturable absorber will pave the way for graphene-based wideband photonics.
| S-EPMC4867430 | biostudies-literature
Project description:The Brewster's law predicts zero reflection of p-polarization on a dielectric surface at a particular angle. However, when loss is introduced into the permittivity of the dielectric, the Brewster condition breaks down and reflection unavoidably appears. In this work, we found an exception to this long-standing dilemma by creating a class of nonmagnetic anisotropic metamaterials, where anomalous Brewster effects with independently tunable absorption and refraction emerge. This loss-independent Brewster effect is bestowed by the extra degrees of freedoms introduced by anisotropy and strictly protected by the reciprocity principle. The bandwidth can cover an extremely wide spectrum from dc to optical frequencies. Two examples of reflectionless Brewster absorbers with different Brewster angles are both demonstrated to achieve large absorbance in a wide spectrum via microwave experiments. Our work extends the scope of Brewster effect to the horizon of nonmagnetic absorptive materials, which promises an unprecedented wide bandwidth for reflectionless absorption with high efficiency.
| S-EPMC8062598 | biostudies-literature
Project description:The rapid development of the optical-cycle-level ultra-fast laser technologies may break through the bottleneck of the traditional ultra-intense laser [i.e., Petawatt (PW, 1015 W) laser currently] and enable the generation of even higher peak-power/intensity lasers. Herein, we simulate an ultra-broadband concept for the realization of an Exawatt-class (EW, 1018 W) high peak-power laser, where the wide-angle non-collinear optical parametric chirped-pulse amplification (WNOPCPA) is combined with the thin-plate post-compression. A frequency-chirped carrier-envelope-phase stable super-continuum laser is amplified to high-energy in WNOPCPA by pumping with two pump-beamlets and injected into the thin-plate post-compression to generate a sub-optical-cycle high-energy laser pulse. The numerical simulation shows this hybrid concept significantly enhances the gain bandwidth in the high-energy amplifier and the spectral broadening in the post-compression. By using this concept, a study of a prototype design of a 0.5 EW system is presented, and several key challenges are also examined.
| S-EPMC7794522 | biostudies-literature
Project description:Light trapping is an important performance of ultra-thin solar cells because it cannot only increase the optical absorption in the photoactive region but it also allows for the efficient absorption with very little materials. Semiconductor-nanoantenna has the ability to enhance light trapping and raise the transfer efficiency of solar energy. In this work, we present a solar absorber based on the gallium arsenide (GaAs) nanoantennas. Near-perfect light absorption (above 90%) is achieved in the wavelength which ranges from 468 to 2870?nm, showing an ultra-broadband and near-unity light trapping for the sun's radiation. A high short-circuit current density up to 61.947?mA/cm2 is obtained. Moreover, the solar absorber is with good structural stability and high temperature tolerance. These offer new perspectives for achieving ultra-compact efficient photovoltaic cells and thermal emitters.
| S-EPMC7142205 | biostudies-literature
Project description:Perfect absorbers (PAs) at near infrared allow various applications such as biosensors, nonlinear optics, color filters, thermal emitters and so on. These PAs, enabled by plasmonic resonance, are typically powerful and compact, but confront inherent challenges of narrow bandwidth, polarization dependence, and limited incident angles as well as requires using expensive lithographic process, which limit their practical applications and mass production. In this work, we demonstrate a non-resonant PA that is comprised of six continuous layers of magnesium fluoride (MgF2) and chromium (Cr) in turns. Our device absorbs more than 90% of light in a broad range of 900-1900 nm. In addition, such a planar design is lithography-free, certainly independent with polarization, and presents a further advantage of wide incidence up to 70°. The measured performance of our optimized PA agrees well with analytical calculations of transfer matrix method (TMM) and numerical simulations of finite element method, and can be readily implemented for practical applications.
| S-EPMC7933432 | biostudies-literature
Project description:Near perfect absorbers find application in many areas including solar cells, energy harvesting and antireflection coatings for space applications. Here we report the use of optical gradation concept to fabricate a near perfect absorber on etched Si wafer. As a proof of concept, 99.4% absorption is achieved in the broad range of 300 nm to 2000 nm. Moreover, absorption capacity of optically graded surface remains higher than 99% up to beam incident angle of 50°. While carbon nanotubes (index ~1.1) are used as top layer, subsequent layers with increasing optical index across the thickness are chosen so as to satisfy zero reflection condition on multilayered assembly. Inward bending of incident beam and total internal reflection of reflected beam caused due to optical index gradient contributes to absorb the incident beam more efficiently. In addition, multiple scattering of incident beam due to the presence of multiscale feature size in graded assembly helps to absorb shorter as well as longer wavelengths of incident light. The graded assembly shows contact angle of 160° with roll-off angle equal to 5° implying that the graded absorber is not only super black but also superhydrophobic and self-cleaning in nature. The combination of properties shown by the super absorber makes it very attractive, especially for next generation solar cells to harness energy in the wavelength range of 1000 nm to 2000 nm.
| S-EPMC6098028 | biostudies-literature
Project description:Metamaterials are artificial materials made of subwavelength elementary cells that give rise to unexpected wave properties that do not exist naturally. However, these properties are generally achieved due to 3D patterning, which is hardly feasible at short wavelengths in the visible and near-infrared regions targeted by most photonic applications. To overcome this limitation, metasurfaces, which are the 2D counterparts of metamaterials, have emerged as promising platforms that are compatible with planar nanotechnologies and thus mass production, which platforms the properties of a metamaterial into a 2D sheet. In the linear regime, wavefront manipulation for lensing, holography, and polarization control has been achieved recently. Interest in metasurfaces operating in the nonlinear regime has also increased due to the ability of metasurfaces to efficiently convert incident light into harmonic frequencies with unusual polarization properties. However, to date, the nonlinear absorption of metasurfaces has been mostly ignored. Here, we demonstrate that plasmonic metasurfaces behave as saturable absorbers with modulation performances superior to the modulation performance of other 2D materials and exhibit unusual polarimetric nonlinear transfer functions. We quantify the link between saturable absorption, the plasmonic resonances of the unit cell and their distribution in a 2D metasurface, and finally provide a practical implementation by integrating the metasurfaces into a fiber laser cavity operating in pulsed regimes driven by the metasurface properties. As such, this work provides new perspectives on ultrathin nonlinear saturable absorbers for applications where tunable nonlinear transfer functions are needed, such as in ultrafast lasers or neuromorphic circuits.
| S-EPMC7109045 | biostudies-literature
Project description:The study presents a novel demonstration of a passively mode-locked erbium-doped fiber laser (EDFL) that is based on a silicon carbide (SixC1-x) saturable absorber. When the C/Si composition ratio is increased to 1.83, the SixC1-x film transforms from two-photon absorption to nonlinear saturable absorption, and the corresponding value reaches -3.9 × 10(-6) cm/W. The Si-rich SixC1-x film cannot mode lock the EDFL because it induced high intracavity loss through two-photon absorption. Even when a stoichiometric SiC is used, the EDFL is mode locked, similar to an EDFL operating under weak nonlinear-polarization-rotation condition. A C-rich SixC1-x film containing sp(2)-orbital C-C bonds with a linear absorbance of 0.172 and nonlinear absorbance of 0.04 at a 181 MW/cm(2) saturation intensity demonstrates nonlinear transmittance. The C-rich SixC1-x saturable absorber successfully generates a short mode-locked EDFL pulse of 470 fs. The fluctuation of the pulse-train envelope dropps considerably from 11.6% to 0.8% when a strong saturable-absorption-induced self-amplitude modulation process occurs in the C-rich SixC1-x film.
| S-EPMC4642298 | biostudies-other
Project description:We report the ultra-broadband nonlinear optical (NLO) response of Bi2TexSe3-x nanosheets produced by a facile solvothermal method. Our result show that the extracted basic optical nonlinearity parameters of Bi2TexSe3-x nanosheets, ?NL, Im?((3)), and FOM reach ~10(4)?cm/GW, ~10(-8)?esu and ~10(-13)?esu cm, respectively, which are several orders of magnitude larger than those of bulk dielectrics. We further observed the excitation intensity dependence of the NLO absorption coefficient and the NLO response sensitivity. The mechanisms of those phenomena were proposed based on physical model. The wavelength dependence of the NLO response of Bi2TexSe3-x nanosheets was investigated, and we determined that the Bi2TexSe3-x nanosheets possess an ultra-broadband nonlinear saturable absorption property covering a range from the visible to the near-infrared band, with the NLO absorption insensitive to the excitation wavelength. This work provide fundamental and systematic insight into the NLO response of Bi2TexSe3-x nanosheets and support their application in photonic devices in the future.
| S-EPMC5016803 | biostudies-other
Project description:In this paper, a theoretical simulation based on a finite-difference time-domain method (FDTD) shows that the solar absorber can reach ultra-broadband and high-efficiency by refractory metals titanium (Ti) and titanium nitride (TiN). In the absorption spectrum of double-size cross-shaped absorber, the absorption bandwidth of more than 90% is 1182 nm (415.648-1597.39 nm). Through the analysis of the field distribution, we know the physical mechanism is the combined action of propagating plasmon resonance and local surface plasmon resonance. After that, the paper has a discussion about the influence of different structure parameters, polarization angle and angle of incident light on the absorptivity of the absorber. At last, the absorption spectrum of the absorber under the standard spectrum of solar radiance Air Mass 1.5 (AM1.5) is studied. The absorber we proposed can be used in solar energy absorber, thermal photovoltaics, hot-electron devices and so on.
| S-EPMC7153370 | biostudies-literature