Structural optimization of a knuckle with consideration of stiffness and durability requirements.
Ontology highlight
ABSTRACT:
SUBMITTER: Kim GY
PROVIDER: S-EPMC4068085 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The long-term durability of polymer components produced by additive manufacturing (AM) in marine conditions is poorly understood. Here, fused filament fabrication (FFF) of Ultem 9085 was conducted and accelerated aging was performed. Two printing orientations (-45/45° and 0/90°) and two sample types (ASTM D638 Type 1 and Type 4) were produced and subjected to accelerated aging in either seawater or air. Results from tensile tests showed that the elastic modulus, yield strength and ultimate tensile strength increased after seawater aging, whereas the elongation to failure decreased. Results of thermogravimetric analysis (TGA) and derivative-TGA curves indicated that hydrolysis occurred after seawater exposure to the polycarbonate (PC) component and changes in structure or hydrogen bonds formed in the polyetherimide (PEI) component. Differential scanning calorimetry showed that physical aging occurred after short exposure periods and low temperature. Longer exposures and higher temperatures resulted in increasing plasticization by water and scission of the PC molecules. Results from Raman suggest that hydrolysis of the PC occurred, with a reduction in free volume produced by physical aging or hydrogen bonding with water molecules. These results highlight that Ultem 9085 is susceptible to degradation in marine environments, and there are two primary mechanisms, including physical and chemical aging. Their specific contribution is highly sensitive to the aging temperature and require careful selection in accelerated aging evaluations.
| S-EPMC10856876 | biostudies-literature
Project description:The current protein requirement estimates in children were largely determined from studies using the nitrogen balance technique, which has been criticized for potentially underestimating protein needs. Indeed, recent advances in stable isotope techniques suggests protein requirement as much as 60% higher than current recommendations. Furthermore, there is not a separate recommendation for children who engage in higher levels of physical activity. The current evidence suggests that physical activity increases protein requirements to support accretion of lean body masses from adaptations to exercise. The indicator amino acid oxidation and the 15N-end product methods represent alternatives to the nitrogen balance technique for estimating protein requirements. Several newer methods, such as the virtual biopsy approach and 2H3-creatine dilution method could also be deployed to inform about pediatric protein requirements, although their validity and reproducibility is still under investigation. Based on the current evidence, the Dietary Reference Intakes for protein indicate that children 4-13 years and 14-18 years require 0.95 and 0.85 g·kg-1·day-1, respectively, based on the classic nitrogen balance technique. There are not enough published data to overturn these estimates; however, this is a much-needed area of research.
| S-EPMC8147948 | biostudies-literature
Project description:The evolutionary-conserved interactions between KASH and SUN domain-containing proteins within the perinuclear space establish physical connections, called LINC complexes, between the nucleus and the cytoskeleton. Here, we show that the KASH domains of Nesprins 1, 2 and 3 interact promiscuously with luminal domains of Sun1 and Sun2. These constructs disrupt endogenous LINC complexes as indicated by the displacement of endogenous Nesprins from the nuclear envelope. We also provide evidence that KASH domains most probably fit a pocket provided by SUN domains and that post-translational modifications are dispensable for that interaction. We demonstrate that the disruption of endogenous LINC complexes affect cellular mechanical stiffness to an extent that compares to the loss of mechanical stiffness previously reported in embryonic fibroblasts derived from mouse lacking A-type lamins, a mouse model of muscular dystrophies and cardiomyopathies. These findings support a model whereby physical connections between the nucleus and the cytoskeleton are mediated by interactions between diverse combinations of Sun proteins and Nesprins through their respective evolutionary-conserved domains. Furthermore, they emphasize, for the first time, the relevance of LINC complexes in cellular mechanical stiffness suggesting a possible involvement of their disruption in various laminopathies, a group of human diseases linked to mutations of A-type lamins.
| S-EPMC2562747 | biostudies-literature
Project description:A newly developed “branched tail” oxyquinoline, neuradapt, and its variants are an order of magnitude more effective HIF prolyl hydroxylase (HIF PHD) inhibitors than roxadustat and vadadustat in HIF1 ODD-luc reporter assay. Structure-activity relationships and computer modeling for the oxyquinoline inhibitors point to the plausible engagement of the pyridine ring nitrogen in interaction with Asp254 residue inside the active site pocket. 2-Methyl-substituted variant of neuradapt was found active in the reporter assay and equally effective in pretreatment paradigm of oxygen glucose deprivation model in neuroblastoma cell line. Microtranscriptomic analysis of the signaling pathways induced by two neuradapt variants in comparison with roxadustat and dimethyl oxalyl glycine shows extreme potency of novel inhibitors working at low micromolar concentrations. Neuradapt and its 2-methyl analog exert the same activation of glycolytic and other HIF-triggered pathways, but result in distinct effects on pathways linked to alternative substrates of HIF PHD1/3 such as p53, NfkB, ATF4, etc. This finding can be interpreted as the specificity of the 2-methyl-substituted variant for HIF PHD2.
2022-01-24 | GSE189905 | GEO
Project description:Human MRI studies show that experience can lead to changes in the volume of task-specific brain regions; however, the behavioural and molecular processes driving these changes remain poorly understood. Here, we used in-vivo mouse MRI and RNA sequencing to investigate the neuroanatomical and transcriptional changes induced by environmental enrichment, exercise, and social interaction. Additionally, we asked whether the volume changes require CREB, a transcription factor critical for memory formation and neuronal plasticity. Enrichment rapidly increased cortical and hippocampal volume, and these effects were not attributable to exercise or social interaction. Instead, they likely arise from learning and sensorimotor experience. Nevertheless, the volume changes were not attenuated in mice with memory impairments caused by loss of CREB, indicating that these effects are driven by processes distinct from this canonical learning and memory pathway. Finally, within brain regions that underwent volume changes, enrichment increased the expression of genes associated with axonogenesis, dendritic spine development, synapse structural plasticity, and neurogenesis, suggesting these processes underlie the volume changes detected with MRI.
2019-01-14 | GSE124954 | GEO
Project description:Structures with variable stiffness have received increasing attention in the fields of robotics, aerospace, structural, and biomedical engineering. This is because they not only adapt to applied loads, but can also combine mutually exclusive properties. Here inspired by insect wings, the concept of "triple stiffness" is introduced and applied to engineering systems that exhibit three distinct deformability regimes. By implementing "flexible joints," "mechanical stoppers," and "buckling zones," structures are engineered to be not only load-bearing and durable, but also impact-resistant. To practice the performance of the design concept in real-life applications, the developed structures are integrated into 3D printed airplane wing models that withstood collisions without failure. The concept developed here opens new avenues for the development of structural elements that are load-bearing, durable, and impact-resistant at the same time.
| S-EPMC8188221 | biostudies-literature
Project description:BackgroundOptimizing stimulation protocol is essential for clinical application of retinal prosthesis. Elongating stimulation pulse width (~25ms /phase) has been proposed as an effective method to improve spatial resolution of epi-retinal implants. However, it is unknown whether longer stimulus pulse width will increase the risk of damaging the retina. In addition, with the advent of next generation retinal prosthesis featuring high-density microelectrode array, it is tempting to optimizing a single set of parameters for all electrodes instead of optimizing parameters of each electrode, but this approach raised biosafety concern. We sought to study the effect of stimulus pulse width on the response of retinal ganglion cells to electrical stimulation, and evaluate if the single parameter set approach was valid based on biosafety measures.MethodsWe stimulated mouse retina using biphasic pulse waveform generated by chosen electrodes (single or a 3x3 assembly) from multiple microelectrode arrays, recorded their action potentials and performed spike sorting. We tested various stimulus intensity with two fixed pulse width: a short one for 1 millisecond per phase, and a long one for 25 milliseconds per phase. All these assays were performed on two mouse models: the wildtype C57BL/6J mice and the photoreceptor degenerated rd10 mice. The action-potential-frequency vs stimulus amplitude profiles were plotted, and three parameters were extracted: the threshold (the lowest stimulus amplitude activating RGC units), safety-limit (stimulus amplitude that attenuated the firing rate to half of the maximum response), and the stimulation amplitude range (the difference between threshold and safety limit parameters).ResultsIn single-electrode stimulation experiment, we found that on average 85% of the recorded units showed attenuated response to extreme stimulation; among those units, an average of 51% stopped responding during stimulation ramping and failed to recover after one-hour post-stimulation, indicating extreme stimulation can damage RGC units. Twenty-five-millisecond pulse stimulation significantly reduced safety-limit and stimulation-amplitude-range parameters of recorded RGC units compared to 1ms pulse stimulation. During stimulus amplitude ramping, the maximum proportion of responsive healthy RGC units was 51% on average in 25ms pulse condition, and 76% on average in 1ms pulse condition, indicating long pulse may inflict more strain on RGCs, and a significant amount of inappropriately stimulated RGCs always exist. The contrast of these proportions could be explained by the tight correlation between the threshold and safety-limit parameter in 25ms pulse condition. These results were corroborated by those from 3x3 array stimulation experiments.ConclusionBase on a biosafety measure (RGCs' evoked firing rate in response to electrical stimulation), we proposed that longer stimulation pulse width could lead to reduced retinal response and thus highlighted the importance of carefully setting the stimulation amplitude in this case. Our results also suggested that optimizing a single set of parameters for all electrodes without individual tweaking always generated a significant amount of inappropriately stimulated RGCs, especially in the long pulse stimulation condition.
| S-EPMC7375526 | biostudies-literature
Project description:Neuradapt: Structural Optimization and Transcriptomic Analysis
| PRJNA784974 | ENA
Project description:The spring-loaded inverted pendulum model is similar to human walking in terms of the center of mass (CoM) trajectory and the ground reaction force. It is thus widely used in humanoid robot motion planning. A method that uses a velocity feedback controller to adjust the landing point of a robot leg is inaccurate in the presence of disturbances and a nonlinear optimization method with multiple variables is complicated and thus unsuitable for real-time control. In this paper, to achieve real-time optimization, a CoM-velocity feedback controller is used to calculate the virtual landing point. We construct a touchdown return map based on a virtual landing point and use nonlinear least squares to optimize spring stiffness. For robot whole-body control, hierarchical quadratic programming optimization is used to achieve strict task priority. The dynamic equation is given the highest priority and inverse dynamics are directly used to solve it, reducing the number of optimizations. Simulation and experimental results show that a force-controlled biped robot with the proposed method can stably walk on unknown uneven ground with a maximum obstacle height of 5 cm. The robot can recover from a 5 Nm disturbance during walking without falling.
| S-EPMC7957877 | biostudies-literature
Project description:The paper deals with the impact of chosen geometric and material factors on maximal stresses in carotid atherosclerotic plaque calculated using patient-specific finite element models. These stresses are believed to be decisive for the plaque vulnerability but all applied models suffer from inaccuracy of input data, especially when obtained in vivo only. One hundred computational models based on ex vivo MRI are used to investigate the impact of wall thickness, MRI slice thickness, lipid core and fibrous tissue stiffness, and media anisotropy on the calculated peak plaque and peak cap stresses. The investigated factors are taken as continuous in the range based on published experimental results, only the impact of anisotropy is evaluated by comparison with a corresponding isotropic model. Design of Experiment concept is applied to assess the statistical significance of these investigated factors representing uncertainties in the input data of the model. The results show that consideration of realistic properties of arterial wall in the model is decisive for the stress evaluation; assignment of properties of fibrous tissue even to media and adventitia layers as done in some studies may induce up to eightfold overestimation of peak stress. The impact of MRI slice thickness may play a key role when local thin fibrous cap is present. Anisotropy of media layer is insignificant, and the stiffness of fibrous tissue and lipid core may become significant in some combinations.
| S-EPMC7523976 | biostudies-literature