Microstructure formation and fracturing characteristics of grey cast iron repaired using laser.
Ontology highlight
ABSTRACT:
SUBMITTER: Yi P
PROVIDER: S-EPMC4083302 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The thermal conditions in the molten pool during the laser surface melting of ductile cast iron EN-GJS-700-2 were estimated by using infrared thermography and thermocouple measurements. The thermal data were then correlated with the microstructure of the melted zone. Additionally, the thermodynamic calculations of a Fe-C-Si alloy system were performed to predict the solidification path of the melted zone. It was found that increasing the cooling rate during solidification of the refined ledeburite eutectic but also suppressed the martensitic transformation. A continuous network of plate-like secondary cementite precipitates and nanometric spherical precipitates of tertiary cementite were observed in regions of primary and eutectic austenite. The solidification of the melted zone terminated with the Liquid ? ?-Fe + Fe3C + Fe8Si2C reaction. The hardness of the melted zone was affected by both the fraction of the retained austenite and the morphology of the ledeburite eutectic.
| S-EPMC7085199 | biostudies-literature
Project description:Laser forming repair (LFR) technology has considerable potential in high strength steel structure repair. 34CrNiMo6 steel has been widely used in high-value components, and it is imperative to repair these damaged components. In this study, two different thicknesses of repaired layers are deposited on the 34CrNiMo6 wrought substrate with five layers and 20 layers via LFR technology. The microstructure, phases, microhardness, and tribological properties are analyzed using optical microscopy, scanning electron microscopy, X-ray diffraction, Vickers hardness testing, and dry sliding wear testing. These results show that the 34CrNiMo6 repaired layers were successfully deposited on the substrate. The microstructure of the laser-repaired layers in the five-layer sample included bainite and retained austenite. For the 20-layer sample, the microstructure in the top of the repaired layers was still bainite and retained austenite, whereas that in the bottom of the repaired layers was transformed into ferrite and cementite. The average coefficients of friction of repaired layers is not significantly different from the substrate. The wear rate of the five LFR layers, 20-layer LFR, and substrate samples were 12.89 × 10-6, 15 × 10-6, and 23.87 × 10-6 mm³/N·m, respectively. The laser forming repaired samples had better wear resistance compared to the substrate. The wear mechanism of laser forming repaired samples is abrasive wear; whereas that of the substrate is abrasive wear and fatigue wear.
| S-EPMC6164275 | biostudies-other
Project description:In this study, a TiC-reinforced composite coating was produced to improve the wear resistance of a pearlite matrix grey iron using a pre-placed Ti powder by laser cladding. Results of scanning electron microscopy (SEM), X-ray diffractometer (XRD), and energy dispersive X-ray spectroscopy (EDS) confirmed that the coating was composed of TiC particles and two kinds of α-Fe phase. The fine TiC particles were only a few microns in size and uniformly distributed on the matrix phase in the composite coating. The microstructure characteristic of the composite coating resulted in the microhardness rising to about 1000 HV0.3 (China GB/T 4342-1991) and the wear resistance significantly increased relative to the substrate. In addition, the fine and homogeneous solidification microstructure without graphite phase in the transition zone led to a good metallurgical bonding and transition between the coating and the substrate. It was of great significance for the cast iron to modify the surface and repair surface defects or surface damage.
| S-EPMC5456623 | biostudies-other
Project description:Sand casting, currently the most popular approach to the casting production, has wide adaptability and low cost. The thermal decomposition characteristics of foundry sand for cast iron were determined for the first time in this study. Thermogravimetry was monitored by simultaneous thermal analyser to find that there was no obvious oxidation or combustion reaction in the foundry sand; the thermal decomposition degree increased as the heating rate increased. There was an obvious endothermic peak at about 846 K due to the transition of quartz from ? to ? phase. A novel technique was established to calculate the starting temperature of volatile emission in determining the volatile release parameter of foundry sand for cast iron. Foundry sand does not readily evaporate because its volatile content is only about 2.68 wt% and its main components have high-temperature stability. The thermal decomposition kinetics parameters of foundry sand, namely activation energy and pre-exponential factor, were obtained under kinetics theory. The activation energy of foundry sand for cast iron was small, mainly due to the wide temperature range of thermal decomposition in the foundry sand.
| S-EPMC6304113 | biostudies-literature
Project description:Study objectivesThe ability to generate slow waves (SW) during non-rapid eye movement (NREM) sleep decreases as early as the 5th decade of life, predominantly over frontal regions. This decrease may concern prominently SW characterized by a fast switch from hyperpolarized to depolarized, or down-to-up, state. Yet, the relationship between these fast and slow switcher SW and cerebral microstructure in ageing is not established.MethodsWe recorded habitual sleep under EEG in 99 healthy late midlife individuals (mean age = 59.3 ± 5.3 years; 68 women) and extracted SW parameters (density, amplitude, frequency) for all SW as well as according to their switcher type (slow vs. fast). We further used neurite orientation dispersion and density imaging (NODDI) to assess microstructural integrity over a frontal grey matter region of interest (ROI).ResultsIn statistical models adjusted for age, sex, and sleep duration, we found that a lower SW density, particularly for fast switcher SW, was associated with a reduced orientation dispersion of neurites in the frontal ROI (p = 0.018, R2β* = 0.06). In addition, overall SW frequency was positively associated with neurite density (p = 0.03, R2β* = 0.05). By contrast, we found no significant relationships between SW amplitude and NODDI metrics.ConclusionsOur findings suggest that the complexity of neurite organization contributes specifically to the rate of fast switcher SW occurrence in healthy middle-aged individuals, corroborating slow and fast switcher SW as distinct types of SW. They further suggest that the density of frontal neurites plays a key role for neural synchronization during sleep.Trial registration numberEudraCT 2016-001436-35.
| S-EPMC9644125 | biostudies-literature
Project description:In this work, the effects of the microstructure and phase constitution of cast magnesium alloy ZK60 (Mg-5.8Zn-0.57Zr, element concentration in wt.%) on the corrosion behavior in aqueous NaCl (0.1 mol dm-3) were investigated by weight-loss measurements, hydrogen evolution tests, and electrochemical techniques. The alloy was found to be composed of ?-Mg matrix, with large second-phase particles of MgZn2 deposited along grain boundaries and a Zr-rich region in the central area of the grains. The large second-phase particles and the Zr-rich regions were more stable than the Mg matrix, resulting in a strong micro-galvanic effect. A filiform corrosion was found. It originated from the second-phase particles in the grain boundary regions in the early corrosion period. The filaments gradually occupied most areas of the alloy surface, and the general corrosion rate decreased significantly. Corrosion pits were developed under filaments. The pit growth rate decreased over time; however, it was about eight times larger than the general corrosion rate. A schematic model is presented to illustrate the corrosion mechanism.
| S-EPMC7504006 | biostudies-literature
Project description:Transparent polycrystalline ceramics with cubic crystal structure have played important roles in a wide variety of solid-state laser applications, whereas for non-cubic structures, single crystal only has been used. For further progress in optical technologies, effective materials beyond the current limitations are necessary. Here we report a new type of non-cubic ceramic laser material that overturns conventional common sense. It is hexagonal Nd-doped fluorapatite (Nd:FAP) ceramics with an optical quality comparable to single crystal while having random crystal orientation. It is composed of ultrafine grains with a loss coefficient of 0.18 cm-1 at a lasing wavelength of 1063 nm, and its laser oscillation was demonstrated. This is the first verification of lasing in randomly oriented non-cubic ceramics. Laser oscillation in the non-cubic ceramics was realized through both advanced liquid-phase nano-powder synthesis technology and highly controlled pulsed-current sintering techniques. Our findings should open new avenues for future solid-state laser and optical applications.
| S-EPMC6635367 | biostudies-literature
Project description:Iron corrosion in drinking water distribution systems causes water discoloration, water quality deterioration, hydraulic loss, and even pipe failures, which are usually influenced by pipe scale structure, water hydraulics, water chemistry, and other factors. This work evaluated the effects of chloride, sulfate, and dissolved inorganic carbon (DIC) on iron release from a 90-year-old cast iron pipe section at water pH 8.0 under stagnant conditions. Experimental results showed that the addition of 150 mg/L sulfate to water significantly increased the mean total iron concentrations to 1.13-2.68 mg/L, relative to 0.54-0.79 mg/L for the baseline water with only 10 mg C/L DIC. Similar results were observed under conditions when chloride was added, and when sulfate and chloride were added together. In contrast, the mean total iron concentrations were significantly reduced by 53-80% in waters with higher DIC of 50 mg C/L, as compared to similar waters with lower DIC of 10 mg C/L. The Larson Ratio could be a good indicator for iron release depending on the circumstances. Iron release was predicted by molecular radial diffusion modelling that accounted for water quality, scale characteristics, hydraulics, and other condition-related information. The results provided insightful information for water systems that have cast iron pipes and galvanized iron pipes and that might encounter changes in water treatment and water sources. More studies are needed to better understand the cast iron corrosion mechanisms under the examined water chemistries.
| S-EPMC7520071 | biostudies-literature
Project description:Background Delayed brain development, brain injury, and neurodevelopmental disabilities are commonly observed in infants operated for complex congenital heart defect. Our previous findings of poorer neurodevelopmental outcomes in individuals operated for simple congenital heart defects calls for further etiological clarification. Hence, we examined the microstructural tissue composition in cerebral cortex and subcortical structures in comparison to healthy controls and whether differences were associated with neurodevelopmental outcomes. Methods and Results Adults (n=62) who underwent surgical closure of an atrial septal defect (n=33) or a ventricular septal defect (n=29) in childhood and a group of healthy, matched controls (n=38) were enrolled. Brain diffusional kurtosis imaging and neuropsychological assessment were performed. Cortical and subcortical tissue microstructure were assessed using mean kurtosis tensor and mean diffusivity and compared between groups and tested for associations with neuropsychological outcomes. Alterations in microstructural tissue composition were found in the parietal, temporal, and occipital lobes in the congenital heart defects, with distinct mean kurtosis tensor cluster-specific changes in the right visual cortex (pericalcarine gyrus, P=0.002; occipital part of fusiform and lingual gyri, P=0.019). Altered microstructural tissue composition in the subcortical structures was uncovered in atrial septal defects but not in ventricular septal defects. Associations were found between altered cerebral microstructure and social recognition and executive function. Conclusions Children operated for simple congenital heart defects demonstrated altered microstructural tissue composition in the cerebral cortex and subcortical structures during adulthood when compared with healthy peers. Alterations in cerebral microstructural tissue composition were associated with poorer neuropsychological performance. Registration URL: https://www.clinicaltrials.gov; Unique identifier: NCT03871881.
| S-EPMC9238637 | biostudies-literature
Project description:Cast iron drinking water pipe biofilm community analysis
| PRJNA692495 | ENA