Carpal malalignment in malunion of the distal radius and the effect of corrective osteotomy.
Ontology highlight
ABSTRACT:
SUBMITTER: De Smet L
PROVIDER: S-EPMC4117698 | biostudies-other | 2014 Aug
REPOSITORIES: biostudies-other
Similar Datasets
Project description:BackgroundTo provide surgical support for corrective osteotomy, we developed an image fusion system for three-dimensional (3D) preoperative planning and fluoroscopy. To assess the utility of this image fusion system, we evaluated the reproducibility of preoperative planning for corrective osteotomy of dorsally angulated distal radius malunion using the system and compared reproducibility without using the system.MethodsTen wrists from 10 distal radius malunion patients who underwent corrective osteotomy were evaluated. 3D preoperative planning and the image fusion system were used for the image fusion group (n = 5). Only 3D preoperative planning was used for the control group (n = 5). 3D preoperative planning was performed for both groups in order to assess reduction, placement, and the choice of implants. In the image fusion group, the outline of the planned image was displayed on a monitor and overlapped with fluoroscopy images during surgery. Reproducibility was evaluated using preoperative plan and postoperative 3D images. Images were compared with the 3D coordinates of the radial styloid process (1), the volar and dorsal edges of the sigmoid notch (2) (3), and the barycentric coordinates of the three reference points. The reproducibility of the preoperative plan was evaluated by the distance of the coordinates between the plan and postoperative images for the reference points.ResultsThe distances between preoperative planning and postoperative reduction in the image fusion group were 2.1 ± 1.1 mm, 1.8 ± 0.7 mm, 1.9 ± 0.9 mm, and 1.4 ± 0.7 mm for reference points (1), (2), (3), and the barycenter, respectively. The distances between preoperative planning and postoperative reduction in the control group were 3.7 ± 1.0 mm, 2.8 ± 2.0 mm, 1.7 ± 0.8 mm, and 1.8 ± 1.2 mm for reference points (1), (2), (3), and the barycenter, respectively. The difference in reference point (1) was significantly smaller in the image fusion group than in the control group (P < 0.05).ConclusionCorrective osteotomy using an image fusion system will become a new surgical support method for fracture malunion. Trial registration Registered as NCT03764501 at ClinicalTrials.gov.
| S-EPMC8244167 | biostudies-literature
Project description:Dorsally angulated malunions of the distal radius have historically been corrected with an opening wedge osteotomy fixed with a dorsal plate. Volar locking plates may facilitate a less morbid approach to corrective osteotomies of the wrist. Eight consecutive patients with an average age of 40 years (range, 15-52 years) underwent correction of a distal radius deformity through a volar approach. Clinical follow-up averaged 17.4 months (range, 7-41 months). Preoperative radiographs revealed an average of 24 degrees of dorsal tilt in patients with dorsal deformity. Postoperatively, their average measurement was <3 degrees of volar tilt. Patients were initially ulnar-positive with an average of 4 mm ulnar-positive variance (range, 2-7 mm). This corrected to less than 1 mm postoperatively. Postoperative disabilities of the arm, shoulder, and hand (DASH), SF-12, and Mayo Wrist scores averaged 10.8, 40.5, and 82.5, respectively. There were no nonunions, and no plates required removal. Distal radius deformity can be effectively addressed through a volar approach with the use of a locking plate.
| S-EPMC2528980 | biostudies-other
Project description:PurposeCarpal tunnel syndrome (CTS) can present following distal radius fracture (DRF) and may progress to require carpal tunnel release (CTR). The primary aim of this study was to determine the incidence of CTS within 6 months of a DRF and the rate of CTR in this population.MethodsWe used the PearlDiver national insurance database to determine the incidence of CTS after DRF. Patients were identified by International Classification of Diseases-10 codes, and treatment modalities for DRF and CTS were determined by respective Current Procedural Terminology codes. Patients with less than 6 months of follow-up, bilateral DRF, or preexisting CTS were excluded. Patient demographic characteristics were recorded. The time from DRF diagnosis to CTS diagnosis and CTR was determined. A multivariable analysis was performed to determine the differences between patients who underwent a CTR compared with those who were treated conservatively.ResultsWe identified 23,733 patients (6,015 men; 17,718 women) who sustained a DRF. Of these patients, 79.1% were treated nonsurgically and 20.9% underwent surgical fixation. In total, 9.2% (N = 2,179) were diagnosed with CTS in their ipsilateral extremity within 6 months of sustaining the DRF. Of the patients whose DRF was treated nonsurgically, 6.3% (N = 1,198) developed CTS and 2.9% (N = 546) required CTR. Of those patients whose DRF was treated surgically, 19.8% (N = 981) developed CTS and 13.3% (N = 661) required CTR. Of those patients with symptoms severe enough to warrant CTR, 18.5% required a second surgical intervention for the CTR.ConclusionsDistal radius fractures severe enough to require surgical fixation are associated with a higher incidence of perioperative CTS. Accordingly, careful evaluation for and counseling on CTS during surgical fixation may decrease the chance of a second surgery. We have identified a cohort of patients with DRFs who may benefit from prophylactic CTR.Type of study/level of evidenceDiagnostic IV.
| S-EPMC9678711 | biostudies-literature
Project description:Background Malunion is a common complication of distal radius fractures. Ulnar shortening osteotomy (USO) may be an effective treatment for distal radius malunion when appropriate indications are observed. Methods The use of USO for treatment of distal radius fracture malunion is described for older patients (typically patients >50 years) with dorsal or volar tilt less than 20 degrees and no carpal malalignment or intercarpal or distal radioulnar joint (DRUJ) arthritis. Description of Technique Preoperative radiographs are examined to ensure there are no contraindications to ulnar shortening osteotomy. The neutral posteroanterior (PA) radiograph is used to measure ulnar variance and to estimate the amount of ulnar shortening required. An ulnar, mid-sagittal incision is used and the dorsal sensory branch of the ulnar nerve is preserved. An USO-specific plating system with cutting jig is used to create parallel oblique osteotomies to facilitate shortening. Intraoperative fluoroscopy and clinical range of motion are checked to ensure adequate shortening and congruous reduction of the ulnar head within the sigmoid notch. Results Previous outcomes evaluation of USO has demonstrated improvement in functional activities, including average flexion-extension and pronosupination motions, and patient reported outcomes. Conclusion The concept and technique of USO are reviewed for the treatment of distal radius malunion when specific indications are observed. Careful attention to detail related to surgical indications and to surgical technique typically will improve range of motion, pain scores, and patient-reported outcomes and will reduce the inherent risks of the procedure, such as ulnar nonunion or the symptoms related to unrecognized joint arthritis. Level IV.
| S-EPMC4117692 | biostudies-other
Project description:BackgroundCorrective osteotomy using dorsal plates and structural bone graft usually has been used for treating symptomatic distal radius malunions. However, the procedure is technically demanding and requires an extensive dorsal approach. Residual deformity is a relatively frequent complication of this technique.Questions/purposesWe evaluated the clinical applicability of a three-dimensional osteotomy using computer-aided design and manufacturing techniques with volar locking plates for distal radius malunions.Patients and methodsTen patients with metaphyseal radius malunions were treated. Corrective osteotomy was simulated with the help of three-dimensional bone surface models created using CT data. We simulated the most appropriate screw holes in the deformed radius using computer-aided design data of a locking plate. During surgery, using a custom-made surgical template, we predrilled the screw holes as simulated. After osteotomy, plate fixation using predrilled screw holes enabled automatic reduction of the distal radial fragment. Autogenous iliac cancellous bone was grafted after plate fixation.ResultsThe median volar tilt, radial inclination, and ulnar variance improved from -20°, 13°, and 6 mm, respectively, before surgery to 12°, 24°, and 1 mm, respectively, after surgery. The median wrist flexion improved from 33° before surgery to 60° after surgery. The median wrist extension was 70° before surgery and 65° after surgery. All patients experienced wrist pain before surgery, which disappeared or decreased after surgery.ConclusionsSurgeons can operate precisely and easily using this advanced technique. It is a new treatment option for malunion of distal radius fractures.
| S-EPMC3094613 | biostudies-literature
Project description:Corrective osteotomies of the distal radius for symptomatic malunion are time-tested procedures that rely on accurate corrections. Patients with combined intra- and extra-articular malunions present a challenging deformity. Virtual planning and patient-specific instruments (PSIs) to transfer the planning into the operating room have been used both to simplify the surgery and to make it more accurate. This report focuses on the clinically achieved accuracy in four patients treated between 2008 and 2012 with virtual planning and PSIs for a combined intra- and extraarticular malunion of the distal radius. The accuracy of the correction is quantified by comparing the virtual three-dimensional (3D) planning model with the postoperative 3D bone model. For the extraarticular malunion the 3D volar tilt, 3D radial inclination and 3D ulnar variance are measured. The volar tilt is undercorrected in all cases with an average of -6 ± 6°. The average difference between the postoperative and planned 3D radial inclination was -1 ± 5°. The average difference between the postoperative and planned 3D ulnar variances is 0 ± 1 mm. For the evaluation of the intraarticular malunion, both the arc method of measurement and distance map measurement are used. The average postoperative maximum gap is 2.1 ± 0.9 mm. The average maximum postoperative step-off is 1.3 ± 0.4 mm. The average distance between the postoperative and planned articular surfaces is 1.1 ± 0.6 mm as determined in the distance map measurement. There is a tendency to achieve higher accuracy as experience builds up, both on the surgeon's side and on the design engineering side. We believe this technology holds the potential to achieve consistent accuracy of very complex corrections.
| S-EPMC3826243 | biostudies-other
Project description:BackgroundCorrective osteotomy is a technically challenging surgical option to improve wrist function in tilted distal radius malunions. However fracture healing in smokers is adversely affected. The aim of this study was to evaluate the clinical and radiological effect of cigarettes on bone union in heavy-smokers who underwent corrective osteotomy with a triangular bone graft harvested from the iliac crest.MethodFifteen patients, who were treated using trapezoidal block grafts taken from the iliac crest, who were smokers of 20 or more cigarettes daily (heavy smokers) with no chronic disease, and who consented to participate in the study. Fifteen non-smoker patients of the same age group were determined as the control group. Radiological measurements were made to include radial inclination and ulnar variance in pre-operative and post-operative radiographs. Functional evaluation was performed using Q-DASH and MAYO hand-wrist scores.ResultsIn both groups, the mean age of the patients was 49,1?±?3,92 years. Smokers group the bone union in the osteotomy line was observed after 16,63 (12-24?h) weeks, non-smokers grup 14.1 (12-24) weeks (p?=?0.06). Range of motion is found similar clinic between in groups (p?>?0.05). Q-DASH for group smokers was 17.54?±?1.85, nonsmokers 17.20?±?1.24 (p?=?0,878); MAYO was 82.27?±?6.06 for 82.00?±?7.74 (p?=?0.874). for group B. No statistically significant difference was noted between the groups.ConclusionOur study showed that cigarette smoking did not have negative effect on union time in the metaphyseal region after correction osteotomy. The time of bone-union in heavy-smokers was 2.5 weeks more than that of non-smokers.
| S-EPMC6994735 | biostudies-literature
Project description:BACKGROUND: The ideal treatment of nonunion of the scaphoid remains unresolved and controversial. It was hypothesized that scaphoid nonunion could be treated successfully using a closed-wedge osteotomy of the distal radius which reduces the inclination of the joint surface and decreases the pressure between the radial and scaphoid surfaces with a reduction of the force applied by the styloid process. We present a preliminary report in six patients with nonunion of the carpal scaphoid using this procedure. The main objective of the osteotomy is to achieve fusion, alleviate pain, and improve function. MATERIALS AND METHODS: Six closed-wedge osteotomies to reduce the inclination of the distal radial surface were performed in patients with scaphoid waist nonunion and a viable proximal pole, without posttrauma osteoarthritis or with moderate posttraumatic osteoarthritis confined to the radio-scaphoid joint. The present series of six patients (all men) were followed for at least 8 months (mean follow-up 14.2 months, range 8-21 months). RESULTS: Solid union was achieved in five patients. Postoperatively, three patients were pain-free, two presented mild pain for heavy work, and one had moderate pain. This type of osteotomy reduced the inclination of the joint surface (radial angulation) 6.2 degrees on average. There was an improvement in joint flexion from a preoperative mean of 40 degrees to 52.5 degrees at last follow-up, in extension from 40.8 degrees to 66.7 degrees , in radial deviation from 15 degrees to 22.5 degrees , and in ulnar deviation from 30.8 degrees to 41.7 degrees . CONCLUSIONS: This preliminary study suggests that a closed-wedge osteotomy of the distal radius could be an alternative approach for patients with scaphoid waist nonunion and a viable proximal pole, without posttrauma osteoarthritis or with moderate posttraumatic osteoarthritis confined to the radio-scaphoid joint. The number of cases was small; however, further studies with a much larger series are needed before routine use of wedge osteotomy in scaphoid nonunion can be recommended.
| S-EPMC2529143 | biostudies-other
Project description:Background and purpose - The reliability of conventional radiography when classifying distal radius fractures (DRF) is fair to moderate. We investigated whether reliability increases when additional computed tomography scans (CT) are used. Patients and methods - In this prospective study, we performed pre- and postreduction posterior-anterior and lateral radiographs of 51 patients presenting with a displaced DRF. The case was included when there was a (questionable) indication for surgical treatment and an additional CT was conducted within 5 days. 4 observers assessed the cases using the Frykman, Fernández, Universal, and AO classification systems. The first 2 assessments were performed using conventional radiography alone; the following 2 assessments were performed with an additional CT. We used the intraclass correlation coefficient (ICC) to evaluate reliability. The CT was used as a reference standard to determine the accuracy. Results - The intraobserver ICC for conventional radiography alone versus radiography and an additional CT was: Frykman 0.57 vs. 0.51; Fernández 0.53 vs. 0.66; Universal 0.57 vs. 0.64; AO 0.59 vs. 0.71. The interobserver ICC was: Frykman: 0.45 vs. 0.28; Fernández: 0.38 vs. 0.44; Universal: 0.32 vs. 0.43; AO: 0.46 vs. 0.40. Interpretation - The intraobserver reliability of the classification systems was fair but improved when an additional CT was used, except for the Frykman classification. The interobserver reliability ranged from poor to fair and did not improve when using an additional CT. Additional CT scanning has implications for the accuracy of scoring the fracture types, especially for simple fracture types.
| S-EPMC5694815 | biostudies-literature
Project description:BackgroundA corrective radius osteotomy is often performed in patients with a symptomatic distal radius malunion. In 3D-planned osteotomies, the unaffected radius is mirrored over the malunited radius after adjusting for left-right length differences using both ulnae. This approach assumes that ulnar length differences in a malunion population are similar to those in a healthy population. This study was conducted to analyze the difference in ulnar length in a distal radius malunion population and to assess the potential influence of age, sex, or malunion side on this difference.MethodsWe evaluated 65 adult patients with distal radius malunion using bilateral forearm CT scans. 3D models of both ulnae were constructed, and length differences were determined along a standardized length axis. The results were compared to two populations without a radius malunion.ResultsThe average absolute ulnar length difference was 2.57 mm (SD 1.81), which was comparable to the two healthy populations. This difference was not significantly affected by age, sex, or malunion side.ConclusionThis study demonstrated that using the ulnar length difference to correct for radial length difference in the current 3D planning process, before using the contralateral radius as a template for a corrective osteotomy in patients with radius malunion, is safe.
| S-EPMC11363621 | biostudies-literature