Compressive strength, chloride permeability, and freeze-thaw resistance of MWNT concretes under different chemical treatments.
Ontology highlight
ABSTRACT:
SUBMITTER: Wang X
PROVIDER: S-EPMC4130312 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:In the 21st century, numerous numerical calculation techniques have been discovered and used in several fields of science and technology. The purpose of this study was to use an artificial neural network (ANN) to forecast the compressive strength of waste-based concretes. The specimens studied include different kinds of mineral additions: metakaolin, silica fume, fly ash, limestone filler, marble waste, recycled aggregates, and ground granulated blast furnace slag. This method is based on the experimental results available for 1303 different mixtures gathered from 22 bibliographic sources for the ANN learning process. Based on a multilayer feedforward neural network model, the data were arranged and prepared to train and test the model. The model consists of 18 inputs following the type of cement, water content, water to binder ratio, replacement ratio, the quantity of superplasticizer, etc. The ANN model was built and applied with MATLAB software using the neural network module. According to the results forecast by the proposed neural network model, the ANN shows a strong capacity for predicting the compressive strength of concrete and is particularly precise with satisfactory accuracy (R² = 0.9888, MAPE = 2.87%).
| S-EPMC9604846 | biostudies-literature
Project description:Freeze-thaw induced fracturing coal by liquid nitrogen (LN2) injection exerts a significant positive effect on the fracture permeability enhancement of the coal reservoir. To evaluate the different freeze-thaw variables which modify the mechanical properties of treated coals, the effects of freezing time, number of freeze-thaw cycles, and the moisture content of coal were studied using combined uniaxial compression and acoustic emission testing systems. Freezing the samples with LN2 for increasing amounts of time degraded the strength of coal within a certain limit. Comparison to freezing time, freeze-thaw cycling caused much more damage to the coal strength. The third variable studied, freeze-thaw damage resulting from high moisture content, was restricted by the coal's moisture saturation limit. Based on the experimental results, equations describing the amount of damage caused by each of the different freeze-thaw variables were empirically regressed. Additionally, by using the ultrasonic wave detection method and fractal dimension analyses, how freeze-thaw induced fractures in the coal was quantitatively analyzed. The results also showed that the velocity of ultrasonic waves had a negative correlation with coal permeability, and the freeze-thaw cycles significantly augment the permeability of frozen-thawed coal masses.
| S-EPMC5473936 | biostudies-literature
Project description:The effects of cement dosage, compaction coefficient, molding method (vertical vibration method and static pressure method), and dry-wet and freeze-thaw cycles on the mechanical strength of cement-improved loess (CIL) were studied to reveal its strength degradation law under dry-wet and freeze-thaw cycles. Results show that when using the vertical vibration molding method, the strength degradation effect of CIL can be improved by increasing the cement dosage and compaction coefficient; however, it is not obvious. Under the action of dry-wet cycle, damages, such as voids and cracks of CIL, develop continuously. Further, the strength deteriorates continuously and does not decrease after more than 15 dry-wet cycles. Therefore, the dry-wet cycle degradation system is selected by considering the most unfavorable conditions. In the process of freeze-thaw alternation, the pores and fissures of CIL develop and evolve continuously and the strength deteriorates continuously under the joint influence of water and low temperature. The strength tends to become stable after more than 12 freeze-thaw cycles. According to the safety principle, the deterioration coefficient of the freeze-thaw cycles is 0.3.
| S-EPMC8248616 | biostudies-literature
Project description:DNA computing harnesses the immense potential of DNA molecules to enable sophisticated and transformative computational processes but is hindered by low computing speed. Here, we propose freeze-thaw cycling as a simple yet powerful method for high-speed DNA computing without complex procedures. Through iterative cycles, we achieve a substantial 20-fold speed enhancement in basic strand displacement reactions. This acceleration arises from the utilization of eutectic ice phase as a medium, temporarily increasing the effective local concentration of molecules during each cycle. In addition, the acceleration effect follows the Hofmeister series, where kosmotropic anions such as sulfate (SO42-) reduce eutectic phase volume, leading to a more notable enhancement in strand displacement reaction rates. Leveraging this phenomenon, freeze-thaw cycling demonstrates its generalizability for high-speed DNA computing across various circuit sizes, achieving up to a remarkable 120-fold enhancement in reaction rates. We envision its potential to revolutionize molecular computing and expand computational applications in diverse fields.
| S-EPMC10456841 | biostudies-literature
Project description:Freeze-thaw cycles in soil are driven by water migration, phase transitions, and heat transfer, which themselves are closely coupled variables in the natural environment. To simulate this complex periglacial process at different time and length scales, a multi-physics model was established by solving sets of equations describing fluid flow and heat transfer, and a dynamic equilibrium equation for phase changes in moisture. This model considers the effects of water-ice phase changes on the hydraulic and thermal properties of soil and the effect of latent heat during phase transition. These equations were then discretized by using the finite volume method and solved using iteration. The open-source software OpenFOAM was used to generate computational code for simulation of coupled heat and fluid transport during freezing and thawing of soil. A set of laboratory freezing tests considering two thermal boundary conditions were carried out, of which the results were obtained to verify the proposed model. In general, the numerical solutions agree well with the measured data. A railway embankment problem, incorporating soil hydrothermal behavior in response to seasonal variations in surface temperature, was finally solved with the finite volume-based approach, indicating the algorithm's robustness and flexibility.
| S-EPMC8174737 | biostudies-literature
Project description:Freeze-thaw erosion is the main reason for rock mass instability in cold regions and poses major threats to public safety. In this study, the stress threshold, energy, and strain field evolution of sandstone and the variation in stress intensity factor of fractures in various stress fields were all investigated after freeze-thaw cycles by uniaxial compression tests and digital image correlation technology. The results show that the elastic modulus, crack initiation stress, and peak stress all fell by 97%, 92.5%, and 89.9%, respectively, as the number of freeze-thaw cycles approaches 80. Elastic energy's storage capacity also dropped from 0.85 to 0.17. Sandstone's strain was increased by freeze-thaw erosion, which also improved ductility and shortened the cracking time. The stress intensity factor at the crack tip was positively correlated with the tip inclination angle and negatively correlated with the number of freeze-thaw cycles. This study provides a useful reference for understanding the stability of rock masses and the characteristics of crack derivation in cold regions.
| S-EPMC10118107 | biostudies-literature
Project description:We studied the effect of freeze-thaw on isoflavone composition in germinated soybeans, particularly the conversion of aglycones, the isoflavone monomers with high biological activity. Germinated soybeans were frozen at -20 °C, -80 °C, and -196 °C respectively, and then the frozen samples (-20 °C) were thawed at 4 °C, 10 °C, and 25 °C respectively. Results showed total isoflavone increased after germination. Aglycones content increased most at -20 °C, which increased about 24 times. The effect of thaw temperature and time indicated there were approximately 89 % glucosides forms converted to aglycones during freeze-thaw. Isoflavone conjugate-hydrolyzing β-glucosidase (ICHG) activity increased by 65.78 % (25 °C) and 59.14 % (48 h) with freeze-thaw. The cells of germinated soybeans were broken, promoting ICHG contact with glucosides and malonyl-glucosides. These results indicated that freeze-thaw greatly changed the content and profile of isoflavones, resulting in a sharp increase in the content of aglycones.
| S-EPMC9743152 | biostudies-literature
Project description:Biochar (BC) is widely utilized as a soil amendment; however, for widely distributed seasonally frozen soils, the effect of BC on soil and the optimal utilization of BC during the freeze‒thaw process are still unclear. In this study, the effects of freeze‒thaw aged biochar (FT-BC) and BC on soil properties and wheat cultivation were systematically investigated, and the underlying interaction mechanism between BC and soil was explored. The results show that FT-BC dramatically reduces the adverse effects of freeze‒thaw cycles on soil, enhances wheat growth, and increases dry matter yield by 17.5 %, which is mainly attributed to the ability of FT-BC to maintain soil structure, reduce water loss rates to below 0.20 g/h, and decrease nitrogen leaching by more than 20 % during freeze‒thaw cycles. Additionally, fresh BC had a greater effect on the fixation of cadmium than FT-BC in the soil, reducing its accumulation in wheat by 22.5 %. Multiple characterizations revealed that the freeze‒thaw process increased the porosity and specific surface area of FT-BC, providing more sites for water and nitrogen adsorption, whereas the dissolved organic matter released from fresh BC had a better ability to trap cadmium. These findings provide insights into the interactions between BC and soil components during the freeze‒thaw process and suggest the optimized utilization of fresh BC and FT-BC for different soil repair purposes.
| S-EPMC11320211 | biostudies-literature
Project description:The polar regions have relatively low richness and diversity of plants and animals, and the basis of the entire ecological chain is supported by microbial diversity. In these regions, understanding the microbial response against environmental factors and anthropogenic disturbances is essential to understand patterns better, prevent isolated events, and apply biotechnology strategies. The Antarctic continent has been increasingly affected by anthropogenic contamination, and its constant temperature fluctuations limit the application of clean recovery strategies, such as bioremediation. We evaluated the bacterial response in oil-contaminated soil through a nutrient-amended microcosm experiment using two temperature regimes: (i) 4 °C and (ii) a freeze-thaw cycle (FTC) alternating between -20 and 4 °C. Bacterial taxa, such as Myxococcales, Chitinophagaceae, and Acidimicrobiales, were strongly related to the FTC. Rhodococcus was positively related to contaminated soils and further stimulated under FTC conditions. Additionally, the nutrient-amended treatment under the FTC regime enhanced bacterial groups with known biodegradation potential and was efficient in removing hydrocarbons of diesel oil. The experimental design, rates of bacterial succession, and level of hydrocarbon transformation can be considered as a baseline for further studies aimed at improving bioremediation strategies in environments affected by FTC regimes.
| S-EPMC8000410 | biostudies-literature
Project description:In biopharmaceutical production processes, freeze-thaw operations are used to ensure product integrity during long hold times, but they also introduce additional stresses such as freeze concentration gradients that might lead to a loss of protein activity. Process characterization of freeze-thaw operations at different scales should be conducted with attention to freezing time and boundary effects to ensure the product stability throughout the process and process development. Currently, process characterization often relies on one or very few temperature probes that detect freezing times based on raw temperature, which is largely influenced by freezing-point depression in case of concentrated solutions. A method to detect freezing based on the second derivative of temperature measurements from Fiber-Bragg-Grating sensors is presented to overcome this issue. The applicability of the method is demonstrated by process characterization of a novel small-scale freeze-thaw device with minimized boundary effects using freezing times of purified water and concentrated formulations. Freezing times varied from 35 to 81 min for temperatures between -60 and -20°C and impacted freeze concentration profiles. Furthermore, freezing time estimations based on the Plank equation revealed model limitations due to start-up temperature gradients, that can be corrected by an empirically extended Plank model. As a hypothesis, we conclude that freezing temperature, from a freeze concentration view, is less important in containers with small characteristic freezing distances such as freeze bags. Using a 2D-resolved temperature profile, a shift of the last point to freeze position from top to bottom of a container was observed when freezing above -30°C.
| S-EPMC8062970 | biostudies-literature