Comparative evaluation of biomass power generation systems in China using hybrid life cycle inventory analysis.
Ontology highlight
ABSTRACT:
SUBMITTER: Liu H
PROVIDER: S-EPMC4212547 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:This data article is associated with the research article "Technical and environmental analysis on the power production from residual biomass using hydrogen as energy vector". This paper shows the procedure to calculate the Life Cycle Inventory (LCI) of the foreground system to perform the Life Cycle Assessment (LCA) of the power production from sugarcane press-mud. Said process encompasses four main stages: i) bioethanol production; ii) bioethanol purification; iii) syngas production and purification; and iv) power production. Additionally, other processes such as biomethane production and manufacturing of catalyst were included. Foreground data related to bioethanol production was gathered from experimental procedures at lab-scale. While foreground data, concerning the other processes such as bioethanol purification, syngas production and purification, power production, and biomethane production, was built by using material and energy flows obtained from Aspen Plus®. Lastly, LCI of the catalyst manufacturing was built based on literature review and the approach stated by Ecoinvent. All the inventories are meaningful to carry out future environmental assessments involving sustainable energy systems based on bioethanol, biomethane, or hydrogen.
| S-EPMC8193086 | biostudies-literature
Project description:Life Cycle Assessments (LCA) of agricultural systems are performed using inventory data from several databases. The inventory data used for agricultural machinery and especially agricultural tractors in these databases are based on old data (from 2002 and not updated since) using trucks ("lorry") as a proxy for the manufacture of tractors. In consequences, they do not reflect the current technology used by farmers and do not allow comparison with new technologies in used in farms such as agricultural robots. The dataset proposed in this paper presents two updated Life Cycle Inventory (LCI) of an agricultural tractor. Data were collected based on the technical system of a tractor manufacturer, scientific and technical literature as well as expert opinion. Data on weight, composition, lifetime and maintenance hours of each tractor component as well as electronic parts, converter catalyst and lead battery are produced. The inventory is calculated based on the raw materials needed for the tractor manufacturing and maintenance over its lifetime as well as the energy and infrastructure needed for manufacturing. Calculations were made based on a tractor of 7300 kg with the following characteristics: 155 CV, 6 cylinders, four-wheel drive. The tractor modelled is representative of tractors from the same power category (i.e. between 100 and 199 CV and 70% of the annual sales in France). Two LCI are produced: a LCI for a 7200 h lifetime tractor, representative of an accounting depreciation, and a LCI for a 12000 h lifetime tractor, representative of the whole service life of the tractor (first use to final disposal). The functional unit is 1 kg of tractor (kg) or 1 piece (p) of tractor during its lifetime.
| S-EPMC10293951 | biostudies-literature
Project description:Confronted with a series of problems caused by surging generation of municipal solid waste (MSW), the Chinese central and local governments have promulgated and implemented policies to deal with them, including promotions of the classification of MSW. However, to date, practical knowledge and understanding about benefits for garbage classification from its environmental performance perspective is still limited. The present study is purposed to comprehensively investigate the environmental effects of garbage classification on municipal solid waste management (MSWM) systems based on three proposed garbage classification scenarios in China, via a comparative life cycle impact assessment (LCIA). Taking advantage of Impact Assessment of Chemical Toxics (IMPACT) 2002+ method, this comparative LCIA study can quantitatively evaluate midpoint, endpoint, and single scored life cycle impacts for the studied MSWM systems. A Monte Carlo uncertainty analysis is carried out to test the effectiveness and reliabilities of the LCIA results. The LCIA and uncertainty analysis results show that MSWM systems based on various garbage classification scenarios have significant variations in the studied midpoint, endpoint, and single scored environmental impacts. Different garbage classification scenarios have their individual environmental-friendly superiority for specific impact categories. Overall, results of this study demonstrate that MSW treatment systems integrated with garbage classification are more environmentally friendly by comparison with non-classification; and that the more elaborate the level of MSW classification, the smaller its impacts on the environment.
| S-EPMC7432649 | biostudies-literature
Project description:Environment-adaptive power generation can play an important role in next-generation energy conversion. Herein, we propose a moisture adsorption-desorption power generator (MADG) based on porous ionizable assembly, which spontaneously adsorbs moisture at high RH and desorbs moisture at low RH, thus leading to cyclic electric output. A MADG unit can generate a high voltage of ~0.5 V and a current of 100 μA at 100% relative humidity (RH), delivers an electric output (~0.5 V and ~50 μA) at 15 ± 5% RH, and offers a maximum output power density approaching to 120 mW m−2. Such MADG devices could conduct enough power to illuminate a road lamp in outdoor application and directly drive electrochemical process. This work affords a closed-loop pathway for versatile moisture-based energy conversion. Reducing humanity’s reliance on fossil fuels will require the development of alternative, renewable energy technologies. Here, authors prepare a moisture adsorption-desorption power generator that asymmetrically adsorbs and desorbs moisture at high and low humidity to provide an electric output.
| S-EPMC9085775 | biostudies-literature
Project description:This data article supports the research article "Geothermal energy in the UK: the life-cycle environmental impacts of electricity production from the United Downs Deep Geothermal Power project". The article reports inventory data, primarily on the construction of the geothermal wells, that is not reported in the main article, and the complete, disaggregated numerical values of the life-cycle environmental impacts reported only in part and in graphical form in the research article. The article also includes data supporting comparative analyses between deep geothermal energy and other energy technologies in the UK, and between the impacts of the construction of wells in a deep and conventional power plant.
| S-EPMC6970141 | biostudies-literature
Project description:Life cycle assessment (LCA) has been used to evaluate environmental impacts of products or processes including wastewater treatment. Uncertainty has not received adequate attention in LCA studies. Uncertainty inherited in LCA steps such as the life cycle inventory (LCI) or the life cycle impact assessment (LCIA) method use is unavoidable, but it affects LCA outcomes and associated decision-making. The objective of this paper was to show the impact of uncertainty from LCI and LCIA method on LCA outcomes by using a case study base approach on wastewater sludge treatment processes. A qualitative analysis included setting criteria about what data to be included in LCI, characterization of data, differentiating between major and minor contributors in LCI modeling, evaluation of data quality indicators, setting achievable alternative scenarios, and selecting proper LCIA method were used, in addition to quantitative analysis included assigning most appropriate values for data gaps and proper distribution, and conducting probabilistic analysis to evaluate overall uncertainty. This research used a full-scale wastewater treatment plant in Missouri, USA for case study in which multiple hearth incineration (MHI) is the existing process, while fluid bed incineration (FBI) and anaerobic digestion (AD) were proposed as the alternatives. Using ReCipe method, the study revealed that variation in LCA results of MHI is 63.4% for a single end-point score of 57.9 mPt. On the two alternative processes, it is 54.6% probable that FBI would have more environmental impact than AD. The case study showed that the proposed steps were able to address issues of data uncertainty. Due to differences in characterization, normalization, and weighting factors, different LCIA methods may point out different conclusions and need to be addressed in evaluation.
| S-EPMC6895703 | biostudies-literature
Project description:Realizing the goal of the Paris Agreement to limit global warming to 2 °C by the end of this century will most likely require deployment of carbon-negative technologies. It is particularly important that China, as the world's top carbon emitter, avoids being locked into carbon-intensive, coal-fired power-generation technologies and undertakes a smooth transition from high- to negative-carbon electricity production. We focus here on deploying a combination of coal and biomass energy to produce electricity in China using an integrated gasification cycle system combined with carbon capture and storage (CBECCS). Such a system will also reduce air pollutant emissions, thus contributing to China's near-term goal of improving air quality. We evaluate the bus-bar electricity-generation prices for CBECCS with mixing ratios of crop residues varying from 0 to 100%, as well as associated costs for carbon mitigation and cobenefits for air quality. We find that CBECCS systems employing a crop residue ratio of 35% could produce electricity with net-zero life-cycle emissions of greenhouse gases, with a levelized cost of electricity of no more than 9.2 US cents per kilowatt hour. A carbon price of approximately $52.0 per ton would make CBECCS cost-competitive with pulverized coal power plants. Therefore, our results provide critical insights for designing a CBECCS strategy in China to harness near-term air-quality cobenefits while laying the foundation for achieving negative carbon emissions in the long run.
| S-EPMC6486764 | biostudies-literature
Project description:Recent technological advances in the recovery of unconventional natural gas, particularly shale gas, have served to dramatically increase domestic production and reserve estimates for the United States and internationally. This trend has led to lowered prices and increased scrutiny on production practices. Questions have been raised as to how greenhouse gas (GHG) emissions from the life cycle of shale gas production and use compares with that of conventionally produced natural gas or other fuel sources such as coal. Recent literature has come to different conclusions on this point, largely due to differing assumptions, comparison baselines, and system boundaries. Through a meta-analytical procedure we call harmonization, we develop robust, analytically consistent, and updated comparisons of estimates of life cycle GHG emissions for electricity produced from shale gas, conventionally produced natural gas, and coal. On a per-unit electrical output basis, harmonization reveals that median estimates of GHG emissions from shale gas-generated electricity are similar to those for conventional natural gas, with both approximately half that of the central tendency of coal. Sensitivity analysis on the harmonized estimates indicates that assumptions regarding liquids unloading and estimated ultimate recovery (EUR) of wells have the greatest influence on life cycle GHG emissions, whereby shale gas life cycle GHG emissions could approach the range of best-performing coal-fired generation under certain scenarios. Despite clarification of published estimates through harmonization, these initial assessments should be confirmed through methane emissions measurements at components and in the atmosphere and through better characterization of EUR and practices.
| S-EPMC4128108 | biostudies-other
Project description:Modern bioenergy is being recognized as an increasingly important low-carbon resource by policy-makers around the world to meet climate policy targets. In India also, there is a clear recognition of the significant role of bioenergy in electricity generation as well as in other applications. In this study, a preliminary attempt has been made to assess the techno-economic feasibility of biomass pellets-based power (BPBP) generation in India. Surplus availability of biomass feedstock from agriculture and forestry/wasteland sector is estimated at 242 million tonnes (Mt) for 2010-11 and is expected to rise to 281 Mt in 2030-31 due to increased crop production and associated waste/residue availability. In terms of related capacity, the potential of BPBP projects is estimated at 35 GW for 2030-31. The associated carbon dioxide mitigation potential resulting from the substitution of coal is estimated at 205 Mt in 2030-31 if the entire biomass surplus is to be diverted for power generation. The levelized cost of electricity is estimated at €0.12 per kWh for BPBP projects as compared to €0.10 per kWh for imported coal based power plants. For states with the lower tariff for biomass power, the break-even price of carbon for BPBP projects is estimated at €18 per tonne. Additionally, BPBP projects will generate employment of more than 5 million person-months in the construction of biomass power plants and over 200,000 full-time employments in the operation of BPBP plants and in the production of biomass pellets.
| S-EPMC6153682 | biostudies-literature
Project description:This data article is associated with the research article "Sustainable production of ethyl levulinate by levulinic acid esterification obtained from Colombian rice straw". This paper shows the methodology to calculate the Life Cycle Inventory (LCI) of the foreground system to perform the Life Cycle Assessment (LCA) of the ethyl levulinate (EL) production from Colombian rice straw (RS). This process encompasses two main stages: (i) RS production (involving cultivation and harvesting) and (ii) EL production (involving acid hydrolysis, levulinic acid (LA) purification, and El production). On one hand, foreground data related to paddy rice cultivation was gathered from the literature review. Besides, emissions of the cultivation stage were calculated using the IPCC (Intergovernmental Panel on Climate Change) methodology. The SQCB (Sustainable Quick Check for Biofuels) methodology was used to calculate NH3, NOx, N2O and NO3 emissions, whereas the SALCA (Swiss Agricultural Life Cycle Assessment) model was used to calculate phosphorous emissions to water. The Turc method was employed to calculate the irrigation requirements based on the rainfall and agrological features of rice culture. On the other hand, foreground data related to RS conversion to EL within a biorefinery scheme was obtained from simulation using Aspen Plus v.12. Lastly, background data associated with raw materials, catalysts, and utilities were gathered from Ecoinvent database. All the inventories are meaningful to carry out future environmental assessments involving sustainable production processes using RS as raw material or biorefinery processes using dilute acid hydrolysis.
| S-EPMC9679704 | biostudies-literature