Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Energy barrier at the N719-dye/CsSnI₃ interface for photogenerated holes in dye-sensitized solar cells.

ABSTRACT: This report is to address the question if black γ-polymorph of cesium tin tri-iodide (B-γ-CsSnI3) can be used as a solid-state hole-transport material in the conventional DSSCs with the N719 dye to replace the liquid electrolyte as reported by I. Chung et al. on Nature 485, 486, (2012). Here we demonstrate rigorously that B-γ-CsSnI3 is not energetically possible to collect photogenerated holes because of the large energy barrier at the interface of N719/B-γ-CsSnI3. Therefore, it cannot serve as a hole-transporter for the conventional DSSCs although it is a good hole-conducting material. A solution-based method was employed to synthesize the B-γ-CsSnI3 polycrystalline thin-films used for this work. These thin-films were then characterized by X-ray diffraction, Hall measurements, optical reflection, and photoluminescence (PL). Particularly, spatially resolved PL intensity images were taken after B-γ-CsSnI3 was incorporated in the DSSC structure to insure the material integrity. The means of ultraviolet photoemission spectroscopy (UPS) was used to reveal why B-γ-CsSnI3 could not act as the substitute of liquid electrolyte in the conventional DSSCs. For the completeness, other two related compounds, one is the yellow polymorph of CsSnI3 and other is Cs2SnI6 with tetravalent tin instead of double-valent tin in CsSnI3 were also investigated by UPS.

SUBMITTER: Zhang J

PROVIDER: S-EPMC4223680 | biostudies-other | 2014

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Multifunctional interface modification of energy relay dye in quasi-solid dye-sensitized solar cells.

Project description:In this paper, 4-(dicyanomethylene)-2-t-butyl-6(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTB) has been used in interface modification of dye-sensitized solar cells (DSCs) with combined effects of retarding charge recombination and Förster resonant energy transfer (FRET). DCJTB interface modification significantly improved photovoltaic performance of DSCs. I-V curves shows the conversion efficiency increases from 4.27% to 5.64% with DCJTB coating. The application of DCJTB with combined effects is beneficial to explore more novel multi-functional interface modification materials to improve the performance of DSCs.

| S-EPMC4081872 | biostudies-other

Energy Harvesting Under Dim-Light Condition With Dye-Sensitized and Perovskite Solar Cells.

Project description:We demonstrate highly efficient energy harvesting devices for dim-light application under 200 lux irradiation using dye-sensitized solar cells (DSCs) and perovskite solar cells (PSCs). The high-efficiency DSCs are composed of cobalt-based redox mediators in 3-methoxypropionitrile (MPN) solvent with MK-2 sensitizer. With the introduction of under layer treatment and fine-tuning of compositions in cobalt-based electrolyte, the power conversion efficiency of cobalt-based DSCs achieves 16.0% under 200 lux illumination. That outperforms the best device using the conventional iodine-based electrolyte illuminated with the same light intensity. Especially, cobalt-based electrolyte system exhibits a higher open circuit voltage than iodine-based electrolyte counterpart. We also investigate perovskite solar cells under dim-light condition. PSCs show higher open circuit voltage and short circuit current density than DSCs with efficiency up to 23.4%. In this work, our results demonstrate the promising potential of DSCs and PSCs in the dim-light applications.

| S-EPMC6465951 | biostudies-literature

Energy Storage via Polyvinylidene Fluoride Dielectric on the Counterelectrode of Dye-Sensitized Solar Cells.

Project description:To study the fundamental energy storage mechanism of photovoltaically self-charging cells (PSCs) without involving light-responsive semiconductor materials such as Si powder and ZnO nanowires, we fabricate a two-electrode PSC with the dual functions of photocurrent output and energy storage by introducing a PVDF film dielectric on the counterelectrode of a dye-sensitized solar cell. A layer of ultrathin Au film used as a quasi-electrode establishes a shared interface for the I-/I3- redox reaction and for the contact between the electrolyte and the dielectric for the energy storage, and prohibits recombination during the discharging period because of its discontinuity. PSCs with a 10-nm-thick PVDF provide a steady photocurrent output and achieve a light-to-electricity conversion efficiency (?) of 3.38%, and simultaneously offer energy storage with a charge density of 1.67 C g-1. Using this quasi-electrode design, optimized energy storage structures may be used in PSCs for high energy storage density.

| S-EPMC3855397 | biostudies-literature

Interface Engineered Binary Platinum Free Alloy-based Counter Electrodes with Improved Performance in Dye-Sensitized Solar Cells.

Project description:The high cost and platinum dissolution issues of counter electrodes (CEs) are two core problems for the development of dye-sensitized solar cells (DSSCs). In this work, different CEs based on binary alloy Ru81.09Co18.91, Ru80.55Se19.45 and Co20.85Se79.15 nanostructures for DSSCs were successfully synthesized and investigated by a facile and environmentally friendly approach. Here, we found that the Co20.85Se79.15 alloy CE-based device yields the higher photoelectric conversion efficiency of 7.08% compared with that (5.80%) of the DSSC using a pure Pt CE because of the larger number of active sites with improved charge transferability and reduced interface resistance by matching work function with the I3?/I? redox electrolyte. The inexpensive synthesis method, cost-effectiveness and superior catalytic activity of the Co20.85Se79.15 alloy may open up a new avenue for the development of CEs for DSSCs in the near future.

| S-EPMC7280534 | biostudies-literature

Interfacial Modification of Photoanode|Electrolyte Interface Using Oleic Acid Enhancing the Efficiency of Dye-Sensitized Solar Cells.

Project description:Dye-sensitized solar cells (DSSCs) are useful devices in converting renewable solar energy into electrical energy. In DSSCs, the triiodide reduction at the surface of TiO2 is one of the detrimental processes that limit the realization of high efficiencies of the device. To alleviate the active sites available on the semiconductor surface for this detrimental process, the interfacial modification of the dye-adsorbed TiO2|electrolyte interface has been attempted by coadsorption of oleic acid (OA) over the TiO2 surface. Thus, the modified cell exhibited a higher efficiency (η) of 12.9% under one sun illumination when compared with that of the unmodified cell (η = 11.1%). To provide an insight into the OA anchoring and dynamics of electron transport at the photoanode|electrolyte interface, molecular spectroscopic and electrochemical impedance spectroscopic analyses were carried out. A red shift in the optical absorption spectrum was observed after the addition of OA to dye-adsorbed TiO2. The binding of OA to TiO2 surface was found to be through bridging bidentate type. Mott-Schottky analyses of the DSSCs under dark conditions were made to probe the shift in the Fermi level of TiO2 upon OA modification. In addition, the Förster resonance energy transfer (FRET) has been found between OA and N719 dye. Thus, the red shift in the optical absorption, enhanced electron-transfer kinetics, and FRET contributes to the observed enhancement in the efficiency of the device containing OA-modified photoanode.

| S-EPMC6643926 | biostudies-literature

Supramolecular Hemicage Cobalt Mediators for Dye-Sensitized Solar Cells.

Project description:A new class of dye-sensitized solar cells (DSSCs) using the hemicage cobalt-based mediator [Co(ttb)]2+/3+ with the highly preorganized hexadentate ligand 5,5'',5''''-((2,4,6-triethyl benzene-1,3,5-triyl)tris(ethane-2,1-diyl))tri-2,2'-bipyridine (ttb) has been fully investigated. The performances of DSSCs sensitized with organic D-π-A dyes utilizing either [Co(ttb)]2+/3+ or the conventional [Co(bpy)3 ]2+/3+ (bpy=2,2'-bipyridine) redox mediator are comparable under 1000 W m-2 AM 1.5 G illumination. However, the hemicage complexes exhibit exceptional stability under thermal and light stress. In particular, a 120-hour continuous light illumination stability test for DSSCs using [Co(ttb)]2+/3+ resulted in a 10 % increase in the performance, whereas a 40 % decrease in performance was found for [Co(bpy)3 ]2+/3+ electrolyte-based DSSCs under the same conditions. These results demonstrate the great promise of [Co(ttb)]2+/3+ complexes as redox mediators for efficient, cost-effective, large-scale DSSC devices.

| S-EPMC5305181 | biostudies-literature

Interface Engineering through Atomic Layer Deposition towards Highly Improved Performance of Dye-Sensitized Solar Cells.

Project description:A composite photoanode comprising ultralong ZnO nanobelts and TiO2 nanoparticles was prepared and its performance in dye-sensitized solar cells (DSSCs) was optimized and compared to the photoanode consisting of conventional TiO2 nanoparticles. The ultralong ZnO nanobelts were synthesized in high yield by a facile solution approach at 90°C followed by annealing at 500°C. The effect of the ratio of ZnO nanobelts to TiO2 nanoparticles on the light scattering, specific surface area, and interface recombination were investigated. An optimum amount of ZnO nanobelts enhanced the photon-conversion efficiency by 61.4% compared to that of the conventional TiO2 nanoparticles. To further reduce the recombination rate and increase the carrier lifetime, Atomic Layer Deposition (ALD) technique was utilized to coat a continuous TiO2 film surrounding the ZnO nanobelts and TiO2 nanoparticles, functioning as a barrier-free access of all electrons to conductive electrodes. This ALD treatment improved the interface contact within the whole photoanode system, finally leading to significant enhancement (137%) in the conversion efficiency of DSSCs.

| S-EPMC4523832 | biostudies-other

Dye-Sensitized Solar Cells: Fundamentals and Current Status.

Project description:Dye-sensitized solar cells (DSSCs) belong to the group of thin-film solar cells which have been under extensive research for more than two decades due to their low cost, simple preparation methodology, low toxicity and ease of production. Still, there is lot of scope for the replacement of current DSSC materials due to their high cost, less abundance, and long-term stability. The efficiency of existing DSSCs reaches up to 12%, using Ru(II) dyes by optimizing material and structural properties which is still less than the efficiency offered by first- and second-generation solar cells, i.e., other thin-film solar cells and Si-based solar cells which offer ~?20-30% efficiency. This article provides an in-depth review on DSSC construction, operating principle, key problems (low efficiency, low scalability, and low stability), prospective efficient materials, and finally a brief insight to commercialization.

| S-EPMC6261913 | biostudies-other

The dye-sensitized solar cell database.

Project description:BackgroundDye-sensitized solar cells (DSSCs) have garnered a lot of attention in recent years. The solar energy to power conversion efficiency of a DSSC is influenced by various components of the cell such as the dye, electrolyte, electrodes and additives among others leading to varying experimental configurations. A large number of metal-based and metal-free dye sensitizers have now been reported and tools using such data to indicate new directions for design and development are on the rise.DescriptionDSSCDB, the first of its kind dye-sensitized solar cell database, aims to provide users with up-to-date information from publications on the molecular structures of the dyes, experimental details and reported measurements (efficiencies and spectral properties) and thereby facilitate a comprehensive and critical evaluation of the data. Currently, the DSSCDB contains over 4000 experimental observations spanning multiple dye classes such as triphenylamines, carbazoles, coumarins, phenothiazines, ruthenium and porphyrins.ConclusionThe DSSCDB offers a web-based, comprehensive source of property data for dye sensitized solar cells. Access to the database is available through the following URL: www.dyedb.com .

| S-EPMC5882482 | biostudies-literature

Photovoltaic Performance of Dye-Sensitized Solar Cells Containing ZnO Microrods.

Project description:At an elevated temperature of 90 °C, a chemical bath deposition using an aqueous solution of Zn(NO3)2·6H2O and (CH2)6N4 resulted in the formation of both nanoflowers and microrods of ZnO on F-doped SnO2 glass with a seed layer. The nanoflowers and microrods were sensitized with dyes for application to the photoelectrodes of dye-sensitized solar cells (DSSCs). By extending the growth time of ZnO, the formation of nanoflowers was reduced and the formation of microrods favored. As the growth time was increased from 4 to 6 and then to 8 h, the open circuit voltage (Voc) values of the DSSCs were increased, whilst the short circuit current (Jsc) values varied only slightly. Changes in the dye-loading amount, dark current, and electrochemical impedance were monitored and they revealed that the increase in Voc was found to be due to a retardation of the charge recombination between photoinjected electrons and I3- ions and resulted from a reduction in the surface area of ZnO microrods. A reduced surface area decreased the dye contents adsorbed on the ZnO microrods, and thereby decreased the light harvesting efficiency (LHE). An increase in the electron collection efficiency attributed to the suppressed charge recombination counteracted the decreased LHE, resulting in comparable Jsc values regardless of the growth time.

| S-EPMC6956303 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data