Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The work mechanism and sub-bandgap-voltage electroluminescence in inverted quantum dot light-emitting diodes.

ABSTRACT: Through introducing a probe layer of bis(4,6-difluorophenylpyridinato-N,C2)picolinatoiridium (FIrpic) between QD emission layer and 4, 4-N, N- dicarbazole-biphenyl (CBP) hole transport layer, we successfully demonstrate that the electroluminescence (EL) mechanism of the inverted quantum dot light-emitting diodes (QD-LEDs) with a ZnO nanoparticle electron injection/transport layer should be direct charge-injection from charge transport layers into the QDs. Further, the EL from QD-LEDs at sub-bandgap drive voltages is achieved, which is in contrast to the general device in which the turn-on voltage is generally equal to or greater than its bandgap voltage (the bandgap energy divided by the electron charge). This sub-bandgap EL is attributed to the Auger-assisted energy up-conversion hole-injection process at the QDs/organic interface. The high energy holes induced by Auger-assisted processes can be injected into the QDs at sub-bandgap applied voltages. These results are of important significance to deeply understand the EL mechanism in QD-LEDs and to further improve device performance.

SUBMITTER: Ji W

PROVIDER: S-EPMC4225534 | biostudies-other | 2014

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

High efficiency blue organic light-emitting diodes with below-bandgap electroluminescence.

Project description:Blue organic light-emitting diodes require high triplet interlayer materials, which induce large energetic barriers at the interfaces resulting in high device voltages and reduced efficiencies. Here, we alleviate this issue by designing a low triplet energy hole transporting interlayer with high mobility, combined with an interface exciplex that confines excitons at the emissive layer/electron transporting material interface. As a result, blue thermally activated delay fluorescent organic light-emitting diodes with a below-bandgap turn-on voltage of 2.5 V and an external quantum efficiency (EQE) of 41.2% were successfully fabricated. These devices also showed suppressed efficiency roll-off maintaining an EQE of 34.8% at 1000 cd m-2. Our approach paves the way for further progress through exploring alternative device engineering approaches instead of only focusing on the demanding synthesis of organic compounds with complex structures.

| S-EPMC8357948 | biostudies-literature

Inverted quantum dot light emitting diodes using polyethylenimine ethoxylated modified ZnO.

Project description:Colloidal quantum dots (QDs) are an emerging class of new materials due to their unique physical properties. In particular, colloidal QD based light emitting diodes (QDLEDs) have been extensively studied and developed for the next generation displays and solid-state lighting. Among a number of approaches to improve performance of the QDLEDs, the most practical one is optimization of charge transport and charge balance in the recombination region. Here, we suggest a polyethylenimine ethoxylated (PEIE) modified ZnO nanoparticles (NPs) as electron injection and transport layer for inverted structure red CdSe-ZnS based QDLED. The PEIE surface modifier, incorporated on the top of the ZnO NPs film, facilitates the enhancement of both electron injection into the CdSe-ZnS QD emissive layer by lowering the workfunction of ZnO from 3.58?eV to 2.87?eV and charge balance on the QD emitter. As a result, this device exhibits a low turn-on voltage of 2.0-2.5?V and has maximum luminance and current efficiency values of 8600?cd/m(2) and current efficiency of 1.53?cd/A, respectively. The same scheme with ZnO NPs/PEIE layer has also been used to successfully fabricate green, blue, and white QDLEDs.

| S-EPMC4354089 | biostudies-other

CsPbBr<sub>3</sub>/CdS Core/Shell Structure Quantum Dots for Inverted Light-Emitting Diodes Application.

Project description:Novel CsPbBr3/CdS core/shell structure quantum dots (QDs) were successfully synthesized using a facile hot-injection method. The corresponding CsPbBr3/CdS QDs based light-emitting diodes (QLEDs) were further prepared, which demonstrated the maximum luminance of 354 cd/m2 and an external quantum efficiency (EQE) of 0.4% with the current efficiency (CE) of 0.3 cd/A. Moreover, the optoelectronic performance of the CsPbBr3/CdS QDs based QLEDs exhibited a comparable enhancement in contrast to the pure CsPbBr3 QDs based QLEDs. Hypothetically, the novel CsPbBr3/CdS structure QDs introduced one new route for advanced light emission applications of perovskite materials.

| S-EPMC6640208 | biostudies-literature

Effects of ZnMgO Electron Transport Layer on the Performance of InP-Based Inverted Quantum Dot Light-Emitting Diodes.

Project description:An environment-friendly inverted indium phosphide red quantum dot light-emitting diode (InP QLED) was fabricated using Mg-doped zinc oxide (ZnMgO) as the electron transport layer (ETL). The effects of ZnMgO ETL on the performance of InP QLED were investigated. X-ray diffraction (XRD) analysis indicated that ZnMgO film has an amorphous structure, which is similar to zinc oxide (ZnO) film. Comparison of morphology between ZnO film and ZnMgO film demonstrated that Mg-doped ZnO film remains a high-quality surface (root mean square roughness: 0.86 nm) as smooth as ZnO film. The optical band gap and ultraviolet photoelectron spectroscopy (UPS) analysis revealed that the conduction band of ZnO shifts to a more matched position with InP quantum dot after Mg-doping, resulting in the decrease in turn-on voltage from 2.51 to 2.32 V. In addition, the ratio of irradiation recombination of QLED increases from 7% to 25% using ZnMgO ETL, which can be attributed to reduction in trap state by introducing Mg ions into ZnO lattices. As a result, ZnMgO is a promising material to enhance the performance of inverted InP QLED. This work suggests that ZnMgO has the potential to improve the performance of QLED, which consists of the ITO/ETL/InP QDs/TCTA/MoO3/Al, and Mg-doping strategy is an efficient route to directionally regulate ZnO conduction bands.

| S-EPMC8151885 | biostudies-literature

Open-circuit voltage deficit, radiative sub-bandgap states, and prospects in quantum dot solar cells.

Project description:Quantum dot photovoltaics (QDPV) offer the potential for low-cost solar cells. To develop strategies for continued improvement in QDPVs, a better understanding of the factors that limit their performance is essential. Here, we study carrier recombination processes that limit the power conversion efficiency of PbS QDPVs. We demonstrate the presence of radiative sub-bandgap states and sub-bandgap state filling in operating devices by using photoluminescence (PL) and electroluminescence (EL) spectroscopy. These sub-bandgap states are most likely the origin of the high open-circuit-voltage (VOC) deficit and relatively limited carrier collection that have thus far been observed in QDPVs. Combining these results with our perspectives on recent progress in QDPV, we conclude that eliminating sub-bandgap states in PbS QD films has the potential to show a greater gain than may be attainable by optimization of interfaces between QDs and other materials. We suggest possible future directions that could guide the design of high-performance QDPVs.

| S-EPMC4754979 | biostudies-literature

Origin of Positive Aging in Quantum-Dot Light-Emitting Diodes.

Project description:The phenomenon of positive aging, i.e., efficiency increased with time, is observed in quantum-dot light-emitting diodes (QLEDs). For example, the external quantum efficiency (EQE) of blue QLEDs is significantly improved from 4.93% to 12.97% after storage for 8 d. The origin of such positive aging is thoroughly investigated. The finding indicates that the interfacial reaction between Al cathode and ZnMgO electron transport layer accounts for such improvement. During shelf-aging, the Al slowly reacts with the oxygen from ZnMgO, and consequently, leads to the formation of AlO x and the production of oxygen vacancies in ZnMgO. The AlO x interlayer reduces the electron injection barrier while the oxygen vacancies increase the conductivity of ZnMgO and, as a result, the electron injection is effectively enhanced. Moreover, the AlO x can effectively suppress the quenching of excitons by metal electrode. Due to the enhancement of electron injection and suppression of exciton quenching, the aged blue, green, and red QLEDs exhibit a 2.6-, 1.3-, and 1.25-fold efficiency improvement, respectively. The studies disclose the origin of positive aging and provide a new insight into the exciton quenching mechanisms, which would be useful for further constructing efficient QLED devices.

| S-EPMC6193172 | biostudies-literature

Optimization of Quantum Dot Thin Films using Electrohydrodynamic Jet Spraying for Solution-Processed Quantum Dot Light-Emitting Diodes.

Project description:The electrohydrodynamic (EHD) jet spraying process is a good method for making quantum dot (QD) layers in light-emitting diodes (LEDs). However, controlling the morphology and large-scale fabrication of the QD layers are critical for realizing all-solution-processed QD-LEDs with high performance. Three spraying techniques were used with the EHD jet spraying technique: a big circular film method, a spiral-line method, and a straight-line method. These techniques were used to obtain QD films with good uniformity. The straight-line spray showed the most promise to obtain a uniform QD layer with large area, and QD-LEDs made with this method showed better performance with a low turn-on voltage of 3.0 V, a luminance of 7801 cd/m2, and a maximum current efficiency of 2.93 cd/A.

| S-EPMC6761258 | biostudies-literature

Optimizing the PMMA Electron-Blocking Layer of Quantum Dot Light-Emitting Diodes.

Project description:Quantum dots (QDs) are promising candidates for producing bright, color-pure, cost-efficient, and long-lasting QD-based light-emitting diodes (QDLEDs). However, one of the significant problems in achieving high efficiency of QDLEDs is the imbalance between the rates of charge-carrier injection into the emissive QD layer and their transport through the device components. Here we investigated the effect of the parameters of the deposition of a poly (methyl methacrylate) (PMMA) electron-blocking layer (EBL), such as PMMA solution concentration, on the characteristics of EBL-enhanced QDLEDs. A series of devices was fabricated with the PMMA layer formed from acetone solutions with concentrations ranging from 0.05 to 1.2 mg/mL. The addition of the PMMA layer allowed for an increase of the maximum luminance of QDLED by a factor of four compared to the control device without EBL, that is, to 18,671 cd/m2, with the current efficiency increased by an order of magnitude and the turn-on voltage decreased by ~1 V. At the same time, we have demonstrated that each particular QDLED characteristic has a maximum at a specific PMMA layer thickness; therefore, variation of the EBL deposition conditions could serve as an additional parameter space when other QDLED optimization approaches are being developed or implied in future solid-state lighting and display devices.

| S-EPMC8401809 | biostudies-literature

Origin of White Electroluminescence in Graphene Quantum Dots Embedded Host/Guest Polymer Light Emitting Diodes.

Project description:Polymer light emitting diodes (PLEDs) using quantum dots (QDs) as emissive materials have received much attention as promising components for next-generation displays. Despite their outstanding properties, toxic and hazardous nature of QDs is a serious impediment to their use in future eco-friendly opto-electronic device applications. Owing to the desires to develop new types of nano-material without health and environmental effects but with strong opto-electrical properties similar to QDs, graphene quantum dots (GQDs) have attracted great interest as promising luminophores. However, the origin of electroluminescence from GQDs incorporated PLEDs is unclear. Herein, we synthesized graphene oxide quantum dots (GOQDs) using a modified hydrothermal deoxidization method and characterized the PLED performance using GOQDs blended poly(N-vinyl carbazole) (PVK) as emissive layer. Simple device structure was used to reveal the origin of EL by excluding the contribution of and contamination from other layers. The energy transfer and interaction between the PVK host and GOQDs guest were investigated using steady-state PL, time-correlated single photon counting (TCSPC) and density functional theory (DFT) calculations. Experiments revealed that white EL emission from the PLED originated from the hybridized GOQD-PVK complex emission with the contributions from the individual GOQDs and PVK emissions.

| S-EPMC4463941 | biostudies-literature

Electroluminescence Generation in PbS Quantum Dot Light-Emitting Field-Effect Transistors with Solid-State Gating.

Project description:The application of light-emitting field-effect transistors (LEFET) is an elegant way of combining electrical switching and light emission in a single device architecture instead of two. This allows for a higher degree of miniaturization and integration in future optoelectronic applications. Here, we report on a LEFET based on lead sulfide quantum dots processed from solution. Our device shows state-of-the-art electronic behavior and emits near-infrared photons with a quantum yield exceeding 1% when cooled. We furthermore show how LEFETs can be used to simultaneously characterize the optical and electrical material properties on the same device and use this benefit to investigate the charge transport through the quantum dot film.

| S-EPMC6307172 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data