Experimental evaluation of sodium silicate-based nanosilica against chloride effects in offshore concrete.
Ontology highlight
ABSTRACT:
SUBMITTER: Kim KM
PROVIDER: S-EPMC4276673 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Dengue virus, one of the most important mosquito-borne viruses, has shown a sharp upward trend, spreading around the world in recent years. Control of vectors Aedes aegypti and Ae. albopictus remains crucial for blocking dengue transmission. The lethal ovitrap (LO) is one of the cost-effective traps based on the classic "lure and kill" strategy, and finding a proper long-lasting effective toxin is key to achieving the desired effect. The concentration of inorganic salts of habitat environment plays a strong role in affecting oviposition, hatching, and development of mosquitoes, but the potential insecticide activity of Sodium Chloride (NaCl) in habitat water as well as LO still lacks research. In this study, we carried out laboratory experiments to systematically explore the effects of different concentrations of NaCl solutions on oviposition, egg hatching, and larval development of Ae. albopictus. Consequently, Ae. albopictus was found to prefer freshwater to lay eggs; whereas 48.8 ± 2.6% eggs were laid in freshwater and 20% in ≥1.0% brackish water, few eggs were laid in 3.0% NaCl solution. Compared with egg hatching, larval development of Ae. albopictus presented a higher sensibility to NaCl concentration. The mortality of the 3rd-4th larvae in 1.0% NaCl solution was 83.8 ± 8.7%, while in 3.0% it reached 100%. Considering the cumulative effect of NaCl, when NaCl concentration was ≥1.0%, no eggs could successfully develop into adults. These data suggested that NaCl solutions with a concentration ≥1.0% can be used as an effective cheap insecticide for Ae. albopictus in subtropical inland aquatic habitats, and also as the "kill" toxin in LOs. Meanwhile, the concentration range from 0 to 2.0% of NaCl solution has the potential to be used as the "lure" in LOs. The technological processes of how to use NaCl as insecticide or in LOs still needs further in-depth exploration.
| S-EPMC8878149 | biostudies-literature
Project description:Cathodic protection (CP) is being increasingly used on reinforced concrete structures to protect steel reinforcing bars from corrosion in aggressive conditions. Due to the complexity of environmental conditions, the design specifications in national and international standards are still open to discussion to achieve both sufficient and efficient protection for reinforced concrete structures in engineering practices. This paper reports an experimental research to investigate the influence of chloride content on concrete resistivity, rebar corrosion rate and the performance of CP operation using different current densities. It aims to understand the correlation between the chloride content and concrete resistivity together with the CP current requirement, and to investigate the precision of the CP design criteria in standards.
| S-EPMC6394418 | biostudies-literature
Project description:Owing to its importance in the assessment of reinforced concrete structures, it is essential to determine the chloride diffusivity of fly ash concrete. This paper presents an investigation into the diffusion characteristics of chloride ions in fly ash concrete. Through experiment, the relationship between chloride diffusivity and curing age up to 1800 days is measured and the effects of curing age, water/binder ratio, aggregate volume fraction, and fly ash content (i.e., percentage of total cementitious material by mass) on chloride diffusivity are evaluated. It is found that the chloride diffusivity decreases with the increase of curing age, aggregate volume fraction, and fly ash content, but increases with the increase of water/binder ratio. In analytical modeling, an equivalent aggregate model is constructed and the equivalent interfacial transition zone (ITZ) thickness is derived analytically. With the equivalent aggregate model, three-phase fly ash concrete reduces to a two-phase composite material. By extending the Maxwell method, the chloride diffusivity of fly ash concrete is formulated. Finally, the validity of the analytical method is verified by experimental results.
| S-EPMC7079598 | biostudies-literature
Project description:The acetogen Clostridium ljungdahlii is capable of syngas fermentation and microbial electrosynthesis. Biofilm formation could benefit both these applications, but was not yet reported for C. ljungdahlii. Biofilm formation does not occur under standard growth conditions, but attachment or aggregation could be induced by different stresses. The strongest biofilm formation was observed with the addition of sodium chloride. After 3 days of incubation, the biomass volume attached to a plastic surface was 20 times higher with than without the addition of 200 mM NaCl to the medium. The addition of NaCl also resulted in biofilm formation on glass, graphite and glassy carbon, the latter two being often used electrode materials for microbial electrosynthesis. Biofilms were composed of extracellular proteins, polysaccharides, as well as DNA, while pilus-like appendages were observed with, but not without, the addition of NaCl. A transcriptome analysis comparing planktonic (no NaCl) and biofilm (NaCl addition) cells showed that C. ljungdahlii coped with the salt stress by the upregulation of the general stress response, Na+ export and osmoprotectant accumulation. A potential role for poly-N-acetylglucosamines and D-alanine in biofilm formation was found. Flagellar motility was downregulated, while putative type IV pili biosynthesis genes were not expressed. Moreover, the gene expression analysis suggested the involvement of the transcriptional regulators LexA, Spo0A and CcpA in stress response and biofilm formation. This study showed that NaCl addition might be a valuable strategy to induce biofilm formation by C. ljungdahlii, which can improve the efficacy of syngas fermentation and microbial electrosynthesis applications.
| S-EPMC5261816 | biostudies-literature
Project description:Silicate fertilization effects Metagenome
| PRJNA687064 | ENA
Project description:The dispersion quality of nanosilica (NS) is an essential parameter to influence and control the material characteristics of nanosilica-enhanced concrete. In this research, the dispersion quality of colloidal nanosilica in simulated concrete environments was investigated using dynamic light scattering. A concrete environment was simulated by creating a synthetic pore solution that mimicked the ionic concentration and pH value of ultrahigh-performance concrete in the fluid state. Four colloidal nanosilica samples were used, ranging in particle sizes from 5 to 75 nm, with differing solid contents and stabilizing ions. It was found that the sodium stabilized 20 nm NS sol remains dispersed at a solid concentration of 2 wt % through a variety of pH values with the inclusion of potassium ions. Calcium ions are a major contributor to the agglomeration of NS sols and only small concentrations of calcium ions can drastically affect the dispersion quality.
| S-EPMC6631289 | biostudies-literature
Project description:PURPOSE: To characterize the expression patterns of the Na+-K+-Cl(-) cotransporter (NKCC) 1 and NKCC2, and the Na+-Cl(-) cotransporter (NCC) in the rat lens and to determine if they play a role in regulating lens volume and transparency. METHODS: RT-PCR was performed on RNA extracted from fiber cells to identify sodium dependent cotransporters expressed in the rat lens. Western blotting and immunohistochemistry, using NKCC1, NKCC2, and NCC antibodies, were used to verify expression at the protein level and to localize transporter expression. Organ cultured rat lenses were incubated in Artificial Aqueous Humor (AAH) of varying osmolarities or isotonic AAH that contained either the NKCC specific inhibitor bumetanide, or the NCC specific inhibitor thiazide for up to 18 h. Lens transparency was monitored with dark field microscopy, while tissue morphology and antibody labeling patterns were recorded using a confocal microscope. RESULTS: Molecular experiments showed that NKCC1 and NCC were expressed in the lens at both the transcript and protein levels, but NKCC2 was not. Immunohistochemistry showed that both NKCC1 and NCC were expressed in the lens cortex, but NCC expression was also found in the lens core. In the lens cortex the majority of labeling for both transporters was cytoplasmic in nature, while in the lens core, NCC labeling was associated with the membrane. Exposure of lenses to either hypotonic or hypertonic AAH had no noticeable effects on the predominantly cytoplasmic location of either transporter in the lens cortex. Incubation of lenses in isotonic AAH plus the NKCC inhibitor bumetanide for 18 h induced a cortical opacity that was initiated by a shrinkage of peripheral fiber cells and the dilation of the extracellular space between fiber cells in a deeper zone located some approximately 150 microm in from the capsule. In contrast, lenses incubated in isotonic AAH and the NCC inhibitor thiazide maintained both their transparency and their regular fiber cell morphology. CONCLUSIONS: We have confirmed the expression of NKCC1 in the rat lens and report for the first time the expression of NCC in lens fiber cells. The expression patterns of the two transporters and the differential effects of their specific inhibitors on fiber cell morphology indicate that these transporters play distinct roles in the lens. NKCC1 appears to mediate ion influx in the lens cortex while NCC may play a role in the lens nucleus.
| S-EPMC2865971 | biostudies-literature
Project description:Memory disorders are the progressive neurological disorder, mainly causing dementia, memory loss and cognitive dysfunctions. The current study is aimed to experimentally validate the crude extract of Canna indica aerial parts (CIA) and root (CIR) against aluminium chloride induced altered memory in rats. Initially, methanolic extract of CIA, hydroalcoholic extract of CIR, and their combination of CIA + CIR were screened for Invitro antioxidant activity via 2,2-diphenyl-1-picrylhydrazyl (DPPH) and nitric oxide (NO) assays, acetylcholinesterase (AChE) inhibitory assay and were also screened for their memory enhancing activity by in-vivo models such as elevated plus maze (EPM), morris water maze (MWM), cooks pole climb (CPC), Actophotometer, novel object recognition (NOR), and T-maze. Aluminium chloride (AlCl3) (17 mg/kg/day p.o.) for 21 days, was used as an Alzheimer’s disease inducing agent and Donepezil (AChE inhibitor) as a standard treatment agent. The AChE, butyrylcholinesterase (BChE) activity and malondialdehyde (MDA) level were significantly increased, and glutathione (GSH), total protein (TP), catalase (CAT), and Dopamine were decreased only in AlCl3 treated rats and treatment with CIA 200 mg/kg and CIA + CIR 200 mg/kg significantly reversed these mechanisms.Histopathology of cortex and hippocampus was examined at 40× magnification, indicating maintain of integrity and architecture of CA1 and CA3 neuronal cells compared to control and standard groups. The in vivo studies of interospective and exteroceptive behavior models (EPM), MWM, CPC, Actophotometer, NOR, T-maze revealed that AlCl3 administration enhanced transfer latency (TL), escape latency time (ELT) and decreases locomotion, discriminatory index, and percentage alternation respectively. However, treatment with CIA and CIA + CIR 200 mg/kg highly significantly reversed the pathological changes of disease, extracts of Canna indica of both root and aerial parts phyto constituents are rich in flavonoids, phlobatannins, anthocyanin pigments, saponins, alkaloids, steroids, terpenoids etc. Which will decipher the acetylcholinestrase inhibitory, antioxidant and anti-inflammatory activity, will ameliorate the pathological state of Alzheimer disease. Graphical abstract Supplementary Information The online version contains supplementary material available at 10.1007/s13596-021-00627-x.
| S-EPMC8853014 | biostudies-literature
Project description:Corrosion-induced damage to concrete reinforced with bars is a serious problem regarding technical and economic aspects and strongly depends on used materials, corrosion environment, and service life. Tests described in this paper refer to a two-year evaluation of the effectiveness of protection provided by zinc-coated low-carbon reinforcing steel of grade B500SP in concrete against chloride corrosion. Performed tests were comparative and included measurements conducted on four groups of concrete test elements with dimensions of 40 mm × 40 mm × 140 mm reinforced with a bar having a diameter of ?8 mm. Particular groups were a combination of different types of concrete with or without chloride additives, with galvanized or black steel. Chlorides as CaCl2 were added to the concrete mix in the amount of 3% of cement weight in concrete. Reinforced concrete specimens were periodically monitored within two years using the following techniques: linear polarization resistance (LPR) and electrochemical impedance spectroscopy (EIS). Polarization measurements were conducted in a three-electrode arrangement, in which a rebar in concrete served as a working electrode, stainless steel sheet was used as an auxiliary electrode, and Cl-/AgCl,Ag was a reference electrode. Comparative tests of changes in the density of corrosion current in concrete specimens without chloride additives basically demonstrated no development of corrosion, and possible passivation was expected in case of black steel. Higher densities of corrosion current were observed for galvanized steel during first days of testing. The reason was the dissolution of zinc after the contact with initially high pH of concrete pore solution. Six-month measurements demonstrated a higher density of corrosion current in concrete specimens with high concentration of chlorides, which unambiguously indicated corrosion in concrete reinforced with galvanized or black steel. Densities of corrosion current determined for selected specimens dramatically decreased after an 18-month interval in measurements. Corrosion was even inhibited on black steel as an insulating barrier of corrosion products was formed. The above observations were confirmed with structural studies using scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) techniques. Results obtained from corrosion (LPR, EIS) and structural (SEM, EDS) tests on specimens of concrete reinforced with steel B500SP demonstrated a very favorable impact of zinc coating on steel by providing two-year protection against corrosion in the environment with very high chloride content.
| S-EPMC7435989 | biostudies-literature
Project description:In this paper, the impact energy potential of hybrid fiber reinforced concrete (HFRC) was explored with different fiber mixes manufactured for comparative analyses of hybridization. The uniaxial compression and 3-point bending tests were conducted to determine the compressive strength and flexural strength. The experimental results imply that the steel fiber outperforms the polypropylene fiber and polyvinyl alcohol fiber in improving compressive and flexural strength. The sequent repeated drop weight impact tests for each mixture concrete specimens were performed to study the effect of hybrid fiber reinforcement on the impact energy. It is suggested that the steel fiber incorporation goes moderately ahead of the polypropylene or polyvinyl alcohol fiber reinforcement in terms of the impact energy improvement. Moreover, the impact toughness of steel-polypropylene hybrid fiber reinforced concrete as well as steel-polyvinyl alcohol hybrid fiber reinforced concrete was studied to relate failure and first crack strength by best fitting. The impact toughness is significantly improved due to the positive hybrid effect of steel fiber and polymer fiber incorporated in concrete. Finally, the hybrid effect index is introduced to quantitatively evaluate the hybrid fiber reinforcement effect on the impact energy improvement. When steel fiber content exceeds polyvinyl alcohol fiber content, the corresponding impact energy is found to be simply sum of steel fiber reinforced concrete and polyvinyl alcohol fiber reinforced concrete.
| S-EPMC6315794 | biostudies-literature