Shaping Ability of Reciproc, UnicOne, and Protaper Universal in Simulated Root Canals.
Ontology highlight
ABSTRACT:
SUBMITTER: Maia Filho EM
PROVIDER: S-EPMC4408636 | biostudies-other | 2015
REPOSITORIES: biostudies-other
Similar Datasets
Project description:IntroductionThe aim of this study was to compare the shaping ability of four root canal preparation systems in newly developed 3D-printed root canal models.Materials and methodsFor this study, 1080 3D-printed acrylic resin blocks with nine different root canal configurations were produced. They were prepared with Reciproc R25 (#25), F6 SkyTaper (#25 and #30) F360 (#25 and #35) and One Shape (#25) (N = 30 per system). Pre- and post-instrumentation images were superimposed for evaluation of the centering ratio of the different systems. Ledges, instrument fractures and preparation times were also recorded. Analysis of variance (ANOVA) and post-hoc Tukey tests were conducted, comparing the mean canal centering ratios and the mean preparation times.ResultsThere were significant differences between all systems regarding the centering ratios in the different root canal configurations (ANOVA p < 0.001). The root canal configuration had considerable effect on the centering ratio of the instruments. The best overall mean centering ratios were achieved with F6 SkyTaper #25 instruments especially in canal configurations with big curvature angles and radii, while F360 #35 was least centered especially in canals with small curvature angles and radii. Most ledges occurred with OneShape, while it was the significantly (p < 0.001) fastest preparation system (86.7 s (SD 13.53)) and Reciproc the significantly (p < 0.001) slowest (103.0 s (SD 20.67)).Conclusion3D-printed root canals are suitable to produce challenging canal configurations and to investigate the limitations of root canal instruments. We found that all instruments caused canal transportations. However, F6 SkyTaper #25 files had better overall centering ratios than the other instruments. In canal configurations with small curvature radii, the centering ratio of some instruments is low and the probability for ledges is increased.
| S-EPMC6070255 | biostudies-literature
Project description:Background:Since the introduction of nickel-titanium (Ni-Ti) instruments to dentistry, a wide variety of Ni-Ti instruments have become commercially available. These Ni-Ti instruments are expensive, which limits their usage in developing countries and forces practitioners to use instruments repeatedly. Another problem is the possible prion cross-contamination associated with the multiple usage of endodontic instruments. In addition, the use of these instruments requires new skills and experience. In this article, the shaping capacities of two conventional rotary file systems, ProFile 25/0.06 and ProTaper F2, were reviewed and compared with the Reciproc single-file system. Methods:A total of 45 simulated canals with 40° curvature, in clear resin blocks, were prepared using conventional rotary systems consisting of ProFile orifice shaping (OS) #3 and final flaring #25/.06, Reciproc R25, and ProTaper shaping file SX and finishing file F2. Pre-and post-instrumentation images were analyzed at ten different levels, using AutoCAD 2007 software. The measurement positions were defined in 1-mm intervals: positions 0-3 established the apical part, positions 4-6 constituted the middle part, and positions 7-10 established the coronal part of the canal. The amount of removed resin, the transportation, instrumentation time, change in working length (WL), instrumentation fractures, and the presence of ledge were evaluated. Data were analyzed using ANOVA, Kruskal-Wallis and independent t-test (p < 0.001). Results:ProFile removed the least resin (p < 0.001) and caused less transportation than Reciproc and ProTaper, in total (p < 0.001). ProTaper caused more transportation ProFile and Reciproc in the apical part (p < 0.000). Reciproc caused more transportation than ProTaper and ProFile (p < 0.001), and the transportation tendency toward the inner aspect of the curvature in the middle part. Reciproc caused the less transportation than ProFile and ProTaper in the coronal part. The transportations tended to occur toward the outside of the curvature, except the middle part with Reciproc and at points 5 and 6 with ProTaper. There were no significant differences among the groups in terms of maintaining the original WL. Reciproc was significantly faster than the others group (p < 0.001). Only one instrument fracture (25/0.06 ProFile) was noted. All groups showed one ledge each. Discussion:The results of the present study showed that both ProFile 25/06 and ProTaper F2, combined with a file used for coronal enlargement (OS3 and SX), have the potential to create satisfactory canal shape in the curved root canals. Further studies using real human teeth are needed to confirm our results.
| S-EPMC6296330 | biostudies-literature
Project description:BackgroundThis study evaluated and compared the shaping ability of four advanced single-file nickel-titanium (NiTi) systems during the preparation of curved second mesiobuccal (MB2) canals in maxillary first molar replicas fabricated by three-dimensional (3D) printing via micro-computed tomography (Micro-CT) imaging.MethodsA total of 60 3D-printed maxillary first molar replicas were constructed from one extracted tooth, with an angle of curvature ranging from 15° to 25°. The MB2 canals from these 60 replicas were divided into 4 groups of 15 replicas according to the canal instrumentation system used, namely, Waveone gold (WOG), Reciproc blue (RCB), XP-endo shaper (XPS) and M3-L. The specimens were scanned before and after preparation using Micro-CT. The pre- and post-instrumentation images of each specimen were superimposed, and the amount of resin removed, the change in surface area, the canal transportation, and centering ability were assessed using the Mimics software. Instrumentation time was also recorded. One-way analysis of variance and least significant difference (LSD) tests were used to statistically compare the groups. The significance level was set at 5%.ResultsInstrumentation time with M3-L was significantly longer than the other systems (P<0.05). The amount of resin removed and the change in surface area generated by the 4 systems were different at the apical, middle, and coronal thirds, and the total canal (P<0.05). Overall, WOG and XPS resulted in the less change than RCB and M3-L. There was no significant difference among the groups at the middle third regarding canal transportation and centering ability (P>0.05). However, a significant difference was found at the apical level (P<0.05), where RCB showed the poorest centering ability and the highest canal transportation (P<0.05). In addition, XPS resulted in the least canal transportation (P<0.05) at the coronal level, while there was no significant difference between the four groups in terms of centering ability.ConclusionsThe M3-L instrument required more time to prepare the curved MB2 canals compared with the other systems. Overall, WOG and XPS showed the least resin removal and surface area change. M3-L, XPS, and WOG instruments respected the original canal curvature better than RCB files.
| S-EPMC8506727 | biostudies-literature
Project description:Antibiotic resistance is an ever-growing problem faced by all major sectors of health care, including dentistry. Recurrent infections related to multidrug-resistant bacteria such as methicillin-resistant Staphylococcus aureus, carbapenem-resistant Enterobacteriaceae, and vancomycin-resistant enterococci (VRE) in hospitals are untreatable and question the effectiveness of notable drugs. Two major reasons for these recurrent infections are acquired antibiotic resistance genes and biofilm formation. None of the traditionally known effective techniques have been able to efficiently resolve these issues. Hence, development of a highly effective antibacterial practice has become inevitable. One example of a hard-to-eradicate pathogen in dentistry is Enterococcus faecalis, which is one of the most common threats observed in recurrent root canal treatment failures, of which the most problematic to treat are its biofilm-forming VRE strains. An effective response against such infections could be the use of bacteriophages (phages). Phage therapy was found to be highly effective against biofilm and multidrug-resistant bacteria and has other advantages like ease of isolation and possibilities for genetic manipulations. The potential of phage therapy in dentistry, in particular against E. faecalis biofilms in root canals, is almost unexplored. Here we review the efforts to develop phage therapy against biofilms. We also focus on the phages isolated against E. faecalis and discuss the possibility of using phages against E. faecalis biofilm in root canals.
| S-EPMC5027333 | biostudies-literature
Project description:The clinical translation of stem-cell-based dental pulp regeneration will require the use of injectable scaffolds. Here, we tested the hypothesis that stem cells from exfoliated deciduous teeth (SHED) can generate a functional dental pulp when injected into full-length root canals. SHED survived and began to express putative markers of odontoblastic differentiation after 7 days when mixed with Puramatrix™ (peptide hydrogel), or after 14 days when mixed with recombinant human Collagen (rhCollagen) type I, and injected into the root canals of human premolars in vitro. Roots of human premolars injected with scaffolds (Puramatrix™ or rhCollagen) containing SHED were implanted subcutaneously into immunodeficient mice (CB-17 SCID). We observed pulp-like tissues with odontoblasts capable of generating new tubular dentin throughout the root canals. Notably, the pulp tissue engineered with SHED injected with either Puramatrix™ or rhCollagen type I presented similar cellularity and vascularization when compared with control human dental pulps. Analysis of these data, collectively, demonstrates that SHED injected into full-length human root canals differentiate into functional odontoblasts, and suggests that such a strategy might facilitate the completion of root formation in necrotic immature permanent teeth.
| S-EPMC3797540 | biostudies-literature
Project description:Background:Dentistry has undergone an evolution in endodontics practice caused by the advancement of rotary techniques for root canal preparation and their subsequent incorporation into the teaching of dentistry undergraduates. This research aimed to evaluate the shaping ability of third-year dental students as their first experience in rotary instrumentation using ProTaper Universal (PTU) and ProTaper Next (PTN) (Dentsply Maillefer) rotary instruments in simulated curved canals. Methods:Forty students instrumented 200 simulated canals with a 40° curvature in resin blocks according to the manufacturer's instructions with PTU and 39 students and 195 canals with PTN files. The canals were prepared at a speed of 300 rpm using a 16:1 reduction hand-piece powered by an electric motor (Xsmart; Dentsply Maillefer). The final apical preparation was set to F2 for the PTU and X2 for the PTN group. The change in canal curvature was evaluated based on Schneider technique using the AutoCAD 2007 software on post-digital photographs. The incidence of instrument fracture and deformation, the incidence of ledge, the change in working length (WL), and the working time were noted. The data were analyzed with Student's t-test and Chi-Square test at a significance level of 0.05 using SPSS. Results:PTN maintained the original canal curvature better, resulting in fewer fractures and ledges, and shaped the canals faster than the PTU (P < 0.05). The mean curves of the resin canals after the instrumentation for the PTU and PTN groups were 24.03° ± 3.14° and 25.64° ± 2.72°, respectively. Thirty-three (17.4%) PTU and 18 (9.3%) PTN files fractured (p < 0.05). Nine (4.5%) PTU and 2 (2.6%) PTN deformed (p > 0.05). The change in WL after instrumentation was 0.97 mm ± 0.95 mm in PTU and 0.96 mm ± 0.80 mm in PTN (p < 0.05). The mean times were 627 s ± 18 s for PTU and 379 s ± 18 s for PTN (p < 0.000). Discussion:PTN can be recommended in severely curved root canals in terms of maintenance of the original canal curvature, superior instrument fracture and fewer ledges. Even if training before preparation provides an acceptable level of canal shaping for preclinical students, the use of NiTi rotary instruments should be included in the undergraduate dental curriculum, contributing to an increase in the quality of root canal shaping and, consequently, to an improvement of the clinical experience of students.
| S-EPMC6705381 | biostudies-literature
Project description:Broken instruments in root canals complicate routine endodontic treatment. This study aimed to compare apical microleakage in root canals containing broken rotary instruments filled with mineral trioxide aggregate (MTA), calcium-enriched mixture (CEM) cement, laterally compacted gutta-percha and injected gutta-percha.In this in vitro, experimental study, 80 extracted human premolars were decoronated and then the roots were randomly divided into four groups (n=20). Root canals were instrumented with Mtwo rotary files. The files were scratched 3 mm from the tip by a high speed handpiece and they were intentionally broken in the apical third of the canals. The middle and coronal thirds of the canals were then filled with MTA, CEM cement, gutta-percha with lateral compaction technique and injected gutta-percha. Apical microleakage was measured using dye penetration method. Data were analyzed using ANOVA and Tukey's test.Root canals filled with CEM cement showed the lowest and those filled with injected gutta-percha showed the highest microleakage according to dye penetration depth. No significant difference was noted between the microleakage of CEM cement and MTA or between lateral compaction of gutta-percha and injected gutta-percha (P>0.05). However, CEM cement and MTA groups had significantly lower microleakage than laterally compacted and injected gutta-percha groups (P<0.05).Due to their superior sealing ability, MTA and CEM cement are suitable for filling of root canals containing a broken instrument compared to laterally compacted and injected gutta-percha.
| S-EPMC5527215 | biostudies-other
Project description:New insights into the microbial profiles of infected root canals in traumatized teeth
| PRJEB61279 | ENA
Project description:Cereal/legume intercropping is likely to achieve the optimal exploitation of soil and atmospheric nitrogen (N) sources to maintain high production and quality levels with low N inputs, as an attempt to eliminate underlying environmental effects. Nevertheless, the extent of the effect of cereal/legume intercropping on nodulation and N fixation of intercropped legumes in root interaction requires extensive verification. In the present study, root interaction of alfalfa/triticale intercropping was simulated in pots with the use of root separation types (pot with no barrier (A-T), pot with nylon mesh barrier (NA-T), pot with plastic barrier (PA-T), and alfalfa alone (SA)) in pots. Moreover, the experiment was measured at a range of N levels (N21, N210) and growing stages (branching, budding and initial flowering stages) in growth chamber. As alfalfa was growing, the total nodule number (TNN), effective nodule number (ENN) and nitrogenase activity (NA) of alfalfa with A-T and other cropping systems more noticeably differed from each other at higher N levels, whereas their diversification was reduced at lower N levels. As alfalfa was growing continuously, fresh nodule weight per plant (PNW) and single fresh nodule weight (SNW) with A-T and other cropping systems were amplified more significantly. The nodulation and N fixation ability under N21 were more significant than those under N210. Dry weight of plant per pot (TDW) and nitrogen accumulation of plant per pot (TNA) with A-T were obviously higher than those with other systems in the initial flowering stage, except for TNA under N21. The parameters regarding the nodulation and N fixation ability were significantly positively correlated on the whole. However, SNW and TNA were not significantly correlated, neither were SNW and TDW. According to the mentioned results, the closer root interaction, the better the nodulation form and N fixation ability of alfalfa will be, and the higher the biomass and N accumulation of all plants in pots will be. Interspecific facilitation in alfalfa/triticale intercropping system resulted in a greater yield and N accumulation; it also ultimately enhanced nodulation and N fixation ability, which can be applied in sustainable systems to avoid N loss to the environment and enhance N use efficiency.
| S-EPMC7060277 | biostudies-literature
Project description:Traumatic dental injuries in young individuals are often exposed to the invasion of oral microorganisms that leads to pulp necrosis. Infective necrosis in permanent teeth not-fully-developed causes aberrant root formation. Regeneration endodontic treatments (RETs) have shown promising results by promoting continued root development by stem cells. Critical to the success of RET is the thorough disinfection of the pulpal space. To establish effective antimicrobial protocols for root canal disinfection, the invading microorganisms need to be identified. In the present study, we use a combination of culture-based and high-throughput molecular sequencing techniques to investigate the microbial profiles from traumatized teeth (30 cases) and controls, i.e., teeth with pulp infections not caused by trauma (32 cases). Overall, a high microbial diversity in traumatized necrotic teeth was observed. Eubacterium yurii subsps. yurii and margaretiae, as well as key 'bridging oral species' F. nucleatum sp., Polymorphum and Corynebacterium matruchotti, were highly associated with traumatized teeth. The microbial compositions of traumatized teeth differed considerably from those of infected teeth not caused by trauma. Age and tooth position also influence microbial compositions. In conclusion, we show that the root canal microflora of traumatized teeth is highly diverse, and it differs from root canal infections not caused by trauma.
| S-EPMC7760719 | biostudies-literature