A Low-Complexity Euclidean Orthogonal LDPC Architecture for Low Power Applications.
Ontology highlight
ABSTRACT:
SUBMITTER: Revathy M
PROVIDER: S-EPMC4429219 | biostudies-other | 2015
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Cochlea devices are powered up with the help of batteries and they should possess long working life to avoid replacing of devices at regular interval of years. Hence the devices with low power consumptions are required. In cochlea devices there are numerous filters, each responsible for frequency variant signals, which helps in identifying speech signals of different audible range. In this paper, multiplierless lookup table (LUT) based auditory filter is implemented. Power aware adder architectures are utilized to add the output samples of the LUT, available at every clock cycle. The design is developed and modeled using Verilog HDL, simulated using Mentor Graphics Model-Sim Simulator, and synthesized using Synopsys Design Compiler tool. The design was mapped to TSMC 65 nm technological node. The standard ASIC design methodology has been adapted to carry out the power analysis. The proposed FIR filter architecture has reduced the leakage power by 15% and increased its performance by 2.76%.
| S-EPMC4254078 | biostudies-other
Project description:A fibre actuator that generates a large strain with high specific power represents a promising strategy to develop novel wearable devices and robotics. We propose a new coiled-fibre actuator based on highly drawn, hard linear low-density polyethylene (LLDPE) fibres. Driven by resistance heating, the actuator can be operated at temperatures as low as 60 °C and uses only 20% of the power consumed by previously coiled fibre actuators when generating 20 MPa of stress at 10% strain. In this temperature range, 1600 W kg-1 of specific work (8 times that of a skeletal muscle) at 69 MPa of tensile stress (230 times that of a skeletal muscle) with a work efficiency of 2% is achieved. The actuator generates strain as high as 23% at 90 °C. Given the low driving temperature, the actuator can be combined with common fabrics or stretchable conductive elastomers without thermal degradation, allowing for easy use in wearable systems. Nanostructural analysis implies that the lamellar crystals in drawn LLDPE fibres are weakly bridged with each other, which allows for easy deformation into compact helical shapes via twisting and the generation of large strain with high work efficiency.
| S-EPMC5095651 | biostudies-literature
Project description:A Schottky diode has been designed and fabricated on an n-AlGaAs/GaAs high-electron-mobility-transistor (HEMT) structure. Current-voltage (I-V) measurements show good device rectification, with a Schottky barrier height of 0.4349 eV for Ni/Au metallization. The differences between the Schottky barrier height and the theoretical value (1.443 eV) are due to the fabrication process and smaller contact area. The RF signals up to 1 GHz are rectified well by the fabricated Schottky diode and a stable DC output voltage is obtained. The increment ratio of output voltage vs input power is 0.2 V/dBm for all tested frequencies, which is considered good enough for RF power detection. Power conversion efficiency up to 50% is obtained at frequency of 1 GHz and input power of 20 dBm with series connection between diode and load, which also shows the device's good potential as a rectenna device with further improvement. The fabricated n-AlGaAs/GaAs Schottky diode thus provides a conduit for breakthrough designs for RF power detectors, as well as ultra-low power on-chip rectenna device technology to be integrated in nanosystems.
| S-EPMC3231723 | biostudies-literature
Project description:This paper presents a simple-to-construct, low dead volume pump capable of generating a wide range of positive and negative pressures for microfluidic applications. The pump generates pressure or vacuum by changing the volume of air confined inside a syringe and is able to generate pressures between -95 and +300 kPa with a resolution as high as 1 Pa. Different from syringe pumps and electrokinetic pumping, which are capable of controlling flow rates only, our pump can be used to generate constant flow rates or constant pressures, which are required for certain applications such as the aspiration of biological cells for biophysical characterization. Compared to syringe pumps, the new pump has almost zero dead volume and does not exhibit pulsatile flows. Additionally, the system does not require electrical power and is cost effective (∼$100). To demonstrate the capabilities of the pump, we used it to aspirate osteoblasts (MC3T3-E1 cells) and to determine Young's modulus of the cells, to generate a concentration gradient, and to produce variable-sized droplets in microchannels using hydrodynamic focusing.
| S-EPMC2973980 | biostudies-other
Project description:BackgroundSequence similarity searching is a very important bioinformatics task. While Basic Local Alignment Search Tool (BLAST) outperforms exact methods through its use of heuristics, the speed of the current BLAST software is suboptimal for very long queries or database sequences. There are also some shortcomings in the user-interface of the current command-line applications.ResultsWe describe features and improvements of rewritten BLAST software and introduce new command-line applications. Long query sequences are broken into chunks for processing, in some cases leading to dramatically shorter run times. For long database sequences, it is possible to retrieve only the relevant parts of the sequence, reducing CPU time and memory usage for searches of short queries against databases of contigs or chromosomes. The program can now retrieve masking information for database sequences from the BLAST databases. A new modular software library can now access subject sequence data from arbitrary data sources. We introduce several new features, including strategy files that allow a user to save and reuse their favorite set of options. The strategy files can be uploaded to and downloaded from the NCBI BLAST web site.ConclusionThe new BLAST command-line applications, compared to the current BLAST tools, demonstrate substantial speed improvements for long queries as well as chromosome length database sequences. We have also improved the user interface of the command-line applications.
| S-EPMC2803857 | biostudies-literature
Project description:Anti-ambipolar switch (AAS) devices at a narrow bias region are necessary to solve the intrinsic leakage current problem of ternary logic circuits. In this study, an AAS device with a very high peak-to-valley ratio (∼106) and adjustable operating range characteristics was successfully demonstrated using a ZnO and dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene heterojunction structure. The entire device integration was completed at a low thermal budget of less than 200 °C, which makes this AAS device compatible with monolithic 3D integration. A 1-trit ternary full adder designed with this AAS device exhibits excellent power-delay product performance (∼122 aJ) with extremely low power (∼0.15 μW, 7 times lower than the reference circuit) and lower device count than those of other ternary device candidates.
| S-EPMC9331138 | biostudies-literature
Project description:The syntheses of phosphatidylserine (PS) conjugates are described, including fluorescent derivatives for potential cellular delivery and bioimaging applications. Installation of terminal functional groups (amine, thiol, or alkyne) onto the sn-2 chain provides reactive sites for bio-orthogonal conjugation of cargo with suitably protected PS derivatives. An amine-containing PS forms amide bonds with peptidic cargo, a thiol derivative is designed for conjugation to cargo that contain alpha-halo carbonyls or Michael acceptors, and the terminal alkyne PS analogue permits "click" conjugation with any azide-tagged molecule. This latter conjugation method is quite versatile as it can be performed without PS headgroup protection, in aqueous media, and with acid-labile cargo.
| S-EPMC2856328 | biostudies-literature
Project description:Biosensing systems based on controllable motion behaviors of droplets have attracted extensive attention, but still face challenges of insufficient sensitivity and uncontrollable dynamic range due to imprecise manipulation of droplet motion on the surfaces. Here, we report an orthogonal dual-regulation strategy for precise motion control of droplets and we demonstrate its utility as a sensitive sensing system with controllable dynamic ranges of sensing for adenosine triphosphate, miRNA, thrombin and kanamycin, as well as discrimination of five kinds of DNA. We endowed a DNA-contained bio-droplet sliding on a lubricant-infused structural surface with micro-grooves to separately adjust the resistance from liquid phase and solid phase. The resistance from liquid phase mainly depended on hydrophobic interaction between DNA and lubricant, which can be finely tuned by different DNA's average chain length. Meanwhile, the resistance from solid surface was determined by the energy barrier from the periodic micro-grooves, which can be adjusted by varying the droplet's sliding direction on the surface. The hydrophobic interaction is conformed to be orthogonal to the micro-grooves' anisotropic resistance by three different methods. This orthogonal dual-regulation strategy thus demonstrated its ability to precisely control bio-droplets' motion behaviors and sensitive detection with adjustable dynamic ranges for various bio-targets. The dual-regulation strategy will provide significant insights for super-wettable biosensors, visual inspection and beyond.
| S-EPMC9584063 | biostudies-literature
Project description:Neuromorphic architectures have become essential building blocks for next-generation computational systems, where intelligence is embedded directly onto low power, small area, and computationally efficient hardware devices. In such devices, realization of neural algorithms requires storage of weights in digital memories, which is a bottleneck in terms of power and area. We hereby propose a biologically inspired low power, hybrid architectural framework for wake-up systems. This architecture utilizes our novel high-performance, ultra-low power molybdenum disulphide (MoS2) based two-dimensional synaptic memtransistor as an analogue memory. Furthermore, it exploits random device mismatches to implement the population coding scheme. Power consumption per CMOS neuron block was found to be 3 nw in the 65?nm process technology, while the energy consumption per cycle was 0.3 pJ for potentiation and 20 pJ for depression cycles of the synaptic device. The proposed framework was demonstrated for classification and regression tasks, using both off-chip and simplified on-chip sign-based learning techniques.
| S-EPMC6821695 | biostudies-literature
Project description:There are multiple definitions for low complexity regions (LCRs) in protein sequences, with all of them broadly considering LCRs as regions with fewer amino acid types compared to an average composition. Following this view, LCRs can also be defined as regions showing composition bias. In this critical review, we focus on the definition of sequence complexity of LCRs and their connection with structure. We present statistics and methodological approaches that measure low complexity (LC) and related sequence properties. Composition bias is often associated with LC and disorder, but repeats, while compositionally biased, might also induce ordered structures. We illustrate this dichotomy, and more generally the overlaps between different properties related to LCRs, using examples. We argue that statistical measures alone cannot capture all structural aspects of LCRs and recommend the combined usage of a variety of predictive tools and measurements. While the methodologies available to study LCRs are already very advanced, we foresee that a more comprehensive annotation of sequences in the databases will enable the improvement of predictions and a better understanding of the evolution and the connection between structure and function of LCRs. This will require the use of standards for the generation and exchange of data describing all aspects of LCRs.Short abstractThere are multiple definitions for low complexity regions (LCRs) in protein sequences. In this critical review, we focus on the definition of sequence complexity of LCRs and their connection with structure. We present statistics and methodological approaches that measure low complexity (LC) and related sequence properties. Composition bias is often associated with LC and disorder, but repeats, while compositionally biased, might also induce ordered structures. We illustrate this dichotomy, plus overlaps between different properties related to LCRs, using examples.
| S-EPMC7299295 | biostudies-literature