Influence of electric current pulses on the solidification of Cu-Bi-Sn immiscible alloys.
Ontology highlight
ABSTRACT:
SUBMITTER: Hongxiang J
PROVIDER: S-EPMC4521156 | biostudies-other | 2015
REPOSITORIES: biostudies-other
Similar Datasets
Project description:In this paper, electric currents with the densities of 1.0?×?102?A/cm2 and 2.0?×?102?A/cm2 were imposed to the Cu-liquid Sn interfacial reaction at 260?°C and 300?°C with the bonding times from 15?min to 960?min. Unlike the symmetrical growth following a cubic root dependence on time during reflowing, the Cu6Sn5 growth enhanced by solid-liquid electromigration followed a linear relationship with time. The elevated electric current density and reaction temperature could greatly accelerate the growth of Cu6Sn5, and could induce the formation of cellular structures on the surfaces because of the constitutional supercooling effect. A growth kinetics model of Cu6Sn5 based on Cu concentration gradient was presented, in which the dissolution of cathode was proved to be the controlling step. This model indicates that higher current density, higher temperature and larger joint width were in favor of the dissolution of Cu. Finally, the shear strengths of joints consisted of different intermetallic compound microstructures were evaluated. The results showed that the Cu6Sn5-based joint could achieve comparable shear strength with Sn-based joint.
| S-EPMC5788868 | biostudies-other
Project description:There is far less study of the refining effect of super gravity fields on solidification structures of metals than of the effects of electrical currents, magnetic and ultrasonic fields. Moreover, the refining mechanisms of super gravity are far from clear. This study applied a super gravity field to Al-Cu alloys to investigate its effect on refining their structures and the mechanism of interaction. The experimental results showed that the solidification structure of Al-Cu alloys can be greatly refined by a super gravity field. The major refining effect was mainly achieved when super gravity was applied at the initial solidification stage; only slight refinement could be obtained towards the end of solidification. No refinement was obtained by the super gravity treatment on pure liquid or solid stages. The effectiveness of super gravity results from its promoting the multiplication of crystal nuclei, which we call "Heavy Crystal Rain", thereby greatly strengthening the migration of crystal nuclei within the alloy. Increasing the solute Cu content can increase nucleation density and restrict the growth of crystals, which further increases the refining effect of super gravity. Within this paper, we also discuss the motile behavior of crystals in a field of super gravity.
| S-EPMC5457018 | biostudies-other
Project description:Various topics taken from the author's research portfolio that involve multicomponent alloy solidification are reviewed. Topics include: ternary eutectic solidification and Scheil-Gulliver paths in ternary systems. A case study of the solidification of commercial 2219 aluminum alloy is described. Also described are modifications of the Scheil-Gulliver analysis to treat dendrite tip kinetics and solid diffusion for multicomponent alloys.
| S-EPMC5557307 | biostudies-other
Project description:The resistivity versus temperature (ρ-T) behaviours of liquid n-type Bi2Te3-x Se x (x = 0.3, 0.45 and 0.6) alloys are explored up to 1050 °C. A clear hump is observed on all ρ-T curves of the three studied Bi2Te3-x Se x melts during the heating process, which suggests that a temperature-induced liquid-liquid structural transition takes place in the melts. Based on this information, the solidification behaviours and microstructures of the alloys with different liquid states are investigated. The samples that experienced liquid structural transition show that the nucleation and growth undercooling degrees are conspicuously enlarged and the solidification time is shortened. As a result, the solidified lamellae are refined and homogenized, the prevalence of low-angle grain boundaries between these lamellae is increased, and the Vicker Hardness is enhanced. Atom probe tomography analyses prove that there is no segregation or nanoprecipitation within the grains, but the Te-rich eutectic structure and the evolution of composition near the Te-matrix phase boundary are investigated in a sample that experienced liquid structural transition. Our work implies that the solidification behaviours of Bi2Te3-xSex alloys are strongly related to their parent liquid states, providing an alternative approach to tailor the thermoelectric and mechanical properties even when only a simple solidification process is performed.
| S-EPMC5446403 | biostudies-literature
Project description:Single-crystalline tin-selenide (SnSe) has emerged as a high-performance and eco-friendly alternative to the lead-chalcogens often used in mid-temperature thermoelectric (TE) generators. At high temperature >800 K, the phase transition from Pnma to Cmcm causes a significant rise in the TE figure-of-merit (zT) curve. Conversely, the SnSe TE requires a booster at low temperatures, which allows broader applicability from a device perspective. Herein, a synergy of Cu alloy and Ag-coating is realized through a sequential multi-step synthesis, designed to combine different metal deposition effects. Single-crystalline (Cu2Se)x(SnSe)1-x alloys grown by the Bridgman method were then coated with a thin Ag layer by radio frequency (RF) sputtering, and the interlayer epitaxial film was observed via electric-current assisted sintering (ECAS). Consequently, the thin Ag-coating improves the electrical conductivity (σ) and reduces the thermal conductivity (κ) for (Cu2Se)0.005(SnSe)0.995+Ag alloy, increasing the zT curve at close to room temperature (373 K). The incorporation of multistep addition by ECAS enables tuning of the overall solubility of the alloy, which opens a new avenue to optimize TE performance in anisotropic 2D materials.
| S-EPMC9865124 | biostudies-literature
Project description:The control of cellular processes by direct electronic interface will facilitate the development of biosensors, synthetic biology, and nanobiotechnology by providing the means to pass information from synthetic to living elements of hybrid systems. To investigate the potential of manipulating cellular gene expression by means of electric current, Escherichia coli cultures were screened for electric current inducible genes using global gene expression profiling. Cells in stationary phase were subjected to a DC current density of 2.5 mA/cm2 for 2 min after which the cells were lysed and the total RNA extracted. Of the 4290 expressed genes in E. coli , 432 genes were found to be significantly differentially expressed at an effective alpha value of 5.8 X 10-6. Of these, 333 genes were induced and 99 repressed. Several genes were verified as differentially expressed by quantitative real-time RT-PCR. The set of differentially expressed genes were examined for the presence of regulatory factors, subsidiary regulon genes, and biological function, particularly redox functions. Transcripts for the regulatory proteins fnr, sspB, soxS, oxyR, creB and yeiL were found to be up-regulated, and crp was down regulated. While soxS and oxyR were up-regulated, the downstream genes controlled by these regulatory proteins were not differentially expressed, suggesting that the oxidative stress level of low-current electric exposure is small. Genes controlled by FNR and CRP, many of which have redox function, were found to be differentially expressed suggesting modulation by direct reduction that can only be partially explained as a response to the reducing environment created by the electrolytic generation of H2 at the cathode. Genes associated with phosphate metabolism and membrane proteins were also differentially expressed. Keywords: electric current induced gene expression
2008-02-12 | GSE5192 | GEO
Project description:The control of cellular processes by direct electronic interface will facilitate the development of biosensors, synthetic biology, and nanobiotechnology by providing the means to pass information from synthetic to living elements of hybrid systems. To investigate the potential of manipulating cellular gene expression by means of electric current, Escherichia coli cultures were screened for electric current inducible genes using global gene expression profiling. Cells in stationary phase were subjected to a DC current density of 2.5 mA/cm2 for 2 min after which the cells were lysed and the total RNA extracted. Of the 4290 expressed genes in E. coli , 432 genes were found to be significantly differentially expressed at an effective alpha value of 5.8 X 10-6. Of these, 333 genes were induced and 99 repressed. Several genes were verified as differentially expressed by quantitative real-time RT-PCR. The set of differentially expressed genes were examined for the presence of regulatory factors, subsidiary regulon genes, and biological function, particularly redox functions. Transcripts for the regulatory proteins fnr, sspB, soxS, oxyR, creB and yeiL were found to be up-regulated, and crp was down regulated. While soxS and oxyR were up-regulated, the downstream genes controlled by these regulatory proteins were not differentially expressed, suggesting that the oxidative stress level of low-current electric exposure is small. Genes controlled by FNR and CRP, many of which have redox function, were found to be differentially expressed suggesting modulation by direct reduction that can only be partially explained as a response to the reducing environment created by the electrolytic generation of H2 at the cathode. Genes associated with phosphate metabolism and membrane proteins were also differentially expressed. Three biological replicates were exposed to electric current along with three biological replicate controls.
2010-06-25 | E-GEOD-5192 | biostudies-arrayexpress
Project description:Electrofusion is an efficient method for fusing cells using short-duration high-voltage electric pulses. However, electrofusion yields are very low when fusion partner cells differ considerably in their size, since the extent of electroporation (consequently membrane fusogenic state) with conventionally used microsecond pulses depends proportionally on the cell radius. We here propose a new and innovative approach to fuse cells with shorter, nanosecond (ns) pulses. Using numerical calculations we demonstrate that ns pulses can induce selective electroporation of the contact areas between cells (i.e. the target areas), regardless of the cell size. We then confirm experimentally on B16-F1 and CHO cell lines that electrofusion of cells with either equal or different size by using ns pulses is indeed feasible. Based on our results we expect that ns pulses can improve fusion yields in electrofusion of cells with different size, such as myeloma cells and B lymphocytes in hybridoma technology.
| S-EPMC3843160 | biostudies-literature
Project description:Directional solidification experiment was carried out with Al-Bi-Sn immiscible alloy under microgravity environment onboard the Tiangong 2 space laboratory of China. Sample with a well-dispersed microstructure was obtained by properly designing the experimental scheme, the matrix shows equiaxed morphology, and there is no visible gas cavity or pinhole in the sample. In contrast, the reference samples solidified on earth show phase-segregated structure and contain some gas cavities or pinholes. The grain morphology of the terrestrial sample depends on the solidification direction, it is equiaxed when the sample ampoule was withdrawn against the gravity direction, while it is columnar when the sample ampoule was withdrawn along the gravity direction. The solidification process and affecting mechanisms of microgravity on the microstructure formation are discussed. The results indicate that the microgravity conditions can effectively diminish the convective flow of the melt and the Stokes motions of the minority phase droplets and gas bubbles, which are helpful for suppressing the occurrence of macro-segregation and preventing the formation of porosity. The results also demonstrate that the microgravity conditions favor the detachment between the melt and the wall of crucible, thus increasing the nucleation undercooling of α-Al nuclei and promoting the formation of equiaxed grain.
| S-EPMC6861255 | biostudies-literature
Project description:Undercooling of Cu-based alloys often induces metastable liquid phase separation followed by rapid solidification of separated liquids. The rapid solidification can help freeze in the morphology of a higher-melting liquid and eases difficulties in studies of liquid phase separation kinetics. In the present work, the influence of static magnetic fields on liquid phase separation in bulk Cu84Co16 composition was investigated. Inductively melted samples were glass-fluxed, undercooled and solidified under uniform and non-uniform magnetic fields generated by a superconducting magnet. Solidification microstructure of the phase-separated samples was examined using an optical microscope. The imposition of the magnetic fields, both uniform and non-uniform, altered the morphology, segregation pattern and size distribution of Co-rich droplets due to liquid phase separation. The imposition of the non-uniform magnetic fields with positive and negative gradients brought about segregation of the Co-rich droplets at the top and the bottom side of the samples, respectively. Such influence of the static magnetic fields is interpreted by assuming intensification of convective flow and Kelvin force-controlled migration of the Co-rich droplets. This article is part of the theme issue 'Heterogeneous materials: metastable and non-ergodic internal structures'.
| S-EPMC6460071 | biostudies-literature