The Solidification of Multicomponent Alloys.
Ontology highlight
ABSTRACT:
SUBMITTER: Boettinger WJ
PROVIDER: S-EPMC5557307 | biostudies-other | 2016 Feb
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Directional solidification experiment was carried out with Al-Bi-Sn immiscible alloy under microgravity environment onboard the Tiangong 2 space laboratory of China. Sample with a well-dispersed microstructure was obtained by properly designing the experimental scheme, the matrix shows equiaxed morphology, and there is no visible gas cavity or pinhole in the sample. In contrast, the reference samples solidified on earth show phase-segregated structure and contain some gas cavities or pinholes. The grain morphology of the terrestrial sample depends on the solidification direction, it is equiaxed when the sample ampoule was withdrawn against the gravity direction, while it is columnar when the sample ampoule was withdrawn along the gravity direction. The solidification process and affecting mechanisms of microgravity on the microstructure formation are discussed. The results indicate that the microgravity conditions can effectively diminish the convective flow of the melt and the Stokes motions of the minority phase droplets and gas bubbles, which are helpful for suppressing the occurrence of macro-segregation and preventing the formation of porosity. The results also demonstrate that the microgravity conditions favor the detachment between the melt and the wall of crucible, thus increasing the nucleation undercooling of α-Al nuclei and promoting the formation of equiaxed grain.
| S-EPMC6861255 | biostudies-literature
Project description:X-ray radioscopy enables the in-situ monitoring of metal alloy processes and then gives access to crucial information on the dynamics of the underlying phenomena. In the last decade, the utilisation of this powerful imaging technique has been adapted to microgravity platforms such as sounding rockets and parabolic flights. The combination of microgravity experimentation with X-ray radioscopy has resulted in a leap in the understanding of fundamental science and has opened new paths in the fields of materials science. The present review focuses on the short history of this research, which includes facility developments, microgravity experiments and results obtained by partners of the XRMON (In-situ X-Ray MONitoring of advanced metallurgical processes under microgravity and terrestrial conditions) research project in the framework of the MAP (Microgravity Application Promotion) programme of the European Space Agency. Three illustrative research topics that were advanced significantly through the use of X-ray radioscopy will be detailed: solidification of metal alloys, metallic foam formation and diffusion in melts.
| S-EPMC10482908 | biostudies-literature
Project description:Hydrogen-induced porosity formed during solidification of aluminum-based alloys has been a major issue adversely affecting the performance of solidification products such as castings, welds or additively manufactured components. A three-dimensional cellular automaton model was developed, for the first time, to predict the formation and evolution of hydrogen porosity coupled with grain growth during solidification of a ternary Al-7wt.%Si-0.3wt.%Mg alloy. The simulation results fully describe the concurrent nucleation and evolution of both alloy grains and hydrogen porosity, yielding the morphology of multiple grains as well as the porosity size and distribution. This model, successfully validated by X-ray micro-tomographic measurements and optical microscopy of a wedge die casting, provides a critical tool for minimizing/controlling porosity formation in solidification products.
| S-EPMC6739399 | biostudies-literature
Project description:Effects of Si and Sr on solidification microstructure and thermal conductivity of Al-Si binary alloys and Al-9Si-Sr ternary were investigated, respectively, with a special focus on the relationship between solidification microstructure and thermal conductivity. It was found that (i) in Al-Si binary alloys, with increasing Si content, α-Al grain size increases and then decreases when Si content is over 7 wt%, while the percentage of eutectic Si continuously increases, which significantly decreases the thermal conductivity and electrical conductivity, and (ii) in Al-9Si-Sr ternary alloys, the presence of Sr has no significant effect on α-Al grain, but effectively modifies eutectic Si and significantly improves the thermal and electrical conductivity. On this basis, two theoretical calculation models [the Maxwell model and the Hashin-Shtrikman (H-S) model] were used to elucidate the relationship between solidification microstructure and thermal conductivity. Compared with the Maxwell model, the H-S model fits better with the measured values. The obtained results are very helpful to the precise composition control during alloy design and recycling of Al-Si-based alloys with the aim to further improve the thermal conductivity of Al-Si-based alloys.Graphical abstractSupplementary informationThe online version contains supplementary material available at 10.1007/s10853-022-07045-7.
| S-EPMC8933373 | biostudies-literature
Project description:Ternary Fe-Cr-Ni stainless steel alloys often exhibit a multi-step transformation known as double recalescence where primary ferrite converts to austenite during rapid solidification processes such as casting and welding. In addition to the volume free energy associated with undercooling between the phases, the free energy driving the transformation comes from two additional sources that are retained within the metastable solid-one from the primary phase undercooling and one from melt shear. A new physical model is proposed based on accumulation of defects, such as dislocations or tilt boundaries, and lattice strain. A dimensionless analysis technique shows that the free energy associated with metastable solidification is conserved and the contribution from melt shear can be predicted based on a modification of the Read-Shockley dislocation energy equation. With these additional terms the incubation time between nucleation events becomes inversely proportional to the total free energy squared for bulk diffusion and cubed for grain boundary diffusion mechanisms. In the case of the ferrous alloys studied, the grain boundary mechanism provides a better fit and when the model is applied the delay time behavior collapses to a single master-curve for the entire alloy family.
| S-EPMC6242990 | biostudies-literature
Project description:A data driven methodology is developed for tracking the collective influence of the multiple attributes of alloying elements on both thermodynamic and mechanical properties of metal alloys. Cobalt-based superalloys are used as a template to demonstrate the approach. By mapping the high dimensional nature of the systematics of elemental data embedded in the periodic table into the form of a network graph, one can guide targeted first principles calculations that identify the influence of specific elements on phase stability, crystal structure and elastic properties. This provides a fundamentally new means to rapidly identify new stable alloy chemistries with enhanced high temperature properties. The resulting visualization scheme exhibits the grouping and proximity of elements based on their impact on the properties of intermetallic alloys. Unlike the periodic table however, the distance between neighboring elements uncovers relationships in a complex high dimensional information space that would not have been easily seen otherwise. The predictions of the methodology are found to be consistent with reported experimental and theoretical studies. The informatics based methodology presented in this study can be generalized to a framework for data analysis and knowledge discovery that can be applied to many material systems and recreated for different design objectives.
| S-EPMC4683530 | biostudies-literature
Project description:Continuous solidification experiments were carried out with Cu-Bi-Sn alloys under the effects of Electric Current Pulses (ECPs). A model describing the microstructure evolution was developed. The formation of the microstructure in the continuously solidified alloys was calculated. The calculations demonstrated that ECPs mainly affect the solidification process through changing the energy barrier for the nucleation of the minority phase droplets (MPDs). When the matrix liquid has a lower electric conductivity compared to the MPD, the ECPs lead to a decrease in the energy barrier for the nucleation of the MPDs which then promote the formation of a finely dispersed microstructure. When the matrix liquid has a higher electric conductivity compared to the MPD, the ECPs cause an increase in the energy barrier for the nucleation and lead to the formation of a phase segregated microstructure.
| S-EPMC4521156 | biostudies-other
Project description:There is far less study of the refining effect of super gravity fields on solidification structures of metals than of the effects of electrical currents, magnetic and ultrasonic fields. Moreover, the refining mechanisms of super gravity are far from clear. This study applied a super gravity field to Al-Cu alloys to investigate its effect on refining their structures and the mechanism of interaction. The experimental results showed that the solidification structure of Al-Cu alloys can be greatly refined by a super gravity field. The major refining effect was mainly achieved when super gravity was applied at the initial solidification stage; only slight refinement could be obtained towards the end of solidification. No refinement was obtained by the super gravity treatment on pure liquid or solid stages. The effectiveness of super gravity results from its promoting the multiplication of crystal nuclei, which we call "Heavy Crystal Rain", thereby greatly strengthening the migration of crystal nuclei within the alloy. Increasing the solute Cu content can increase nucleation density and restrict the growth of crystals, which further increases the refining effect of super gravity. Within this paper, we also discuss the motile behavior of crystals in a field of super gravity.
| S-EPMC5457018 | biostudies-other
Project description:A grand challenge in material science is to understand the correlation between intrinsic properties and defect dynamics. Radiation tolerant materials are in great demand for safe operation and advancement of nuclear and aerospace systems. Unlike traditional approaches that rely on microstructural and nanoscale features to mitigate radiation damage, this study demonstrates enhancement of radiation tolerance with the suppression of void formation by two orders magnitude at elevated temperatures in equiatomic single-phase concentrated solid solution alloys, and more importantly, reveals its controlling mechanism through a detailed analysis of the depth distribution of defect clusters and an atomistic computer simulation. The enhanced swelling resistance is attributed to the tailored interstitial defect cluster motion in the alloys from a long-range one-dimensional mode to a short-range three-dimensional mode, which leads to enhanced point defect recombination. The results suggest design criteria for next generation radiation tolerant structural alloys.
| S-EPMC5171798 | biostudies-literature
Project description:The resistivity versus temperature (ρ-T) behaviours of liquid n-type Bi2Te3-x Se x (x = 0.3, 0.45 and 0.6) alloys are explored up to 1050 °C. A clear hump is observed on all ρ-T curves of the three studied Bi2Te3-x Se x melts during the heating process, which suggests that a temperature-induced liquid-liquid structural transition takes place in the melts. Based on this information, the solidification behaviours and microstructures of the alloys with different liquid states are investigated. The samples that experienced liquid structural transition show that the nucleation and growth undercooling degrees are conspicuously enlarged and the solidification time is shortened. As a result, the solidified lamellae are refined and homogenized, the prevalence of low-angle grain boundaries between these lamellae is increased, and the Vicker Hardness is enhanced. Atom probe tomography analyses prove that there is no segregation or nanoprecipitation within the grains, but the Te-rich eutectic structure and the evolution of composition near the Te-matrix phase boundary are investigated in a sample that experienced liquid structural transition. Our work implies that the solidification behaviours of Bi2Te3-xSex alloys are strongly related to their parent liquid states, providing an alternative approach to tailor the thermoelectric and mechanical properties even when only a simple solidification process is performed.
| S-EPMC5446403 | biostudies-literature