Revealing the nanoparticles aspect ratio in the glass-metal nanocomposites irradiated with femtosecond laser.
Ontology highlight
ABSTRACT:
SUBMITTER: Chervinskii S
PROVIDER: S-EPMC4562248 | biostudies-other | 2015
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The capacity to synthesize and design highly intricated nanoscale objects of different sizes, surfaces, and shapes dramatically conditions the development of multifunctional nanomaterials. Ultrafast laser technology holds great promise as a contactless process able to rationally and rapidly manufacture complex nanostructures bringing innovative surface functions. The most critical challenge in controlling the growth of laser-induced structures below the light diffraction limit is the absence of external order associated to the inherent local interaction due to the self-organizing nature of the phenomenon. Here high aspect-ratio nanopatterns driven by near-field surface coupling and architectured by timely-controlled polarization pulse shaping are reported. Electromagnetic coupled with hydrodynamic simulations reveal why this unique optical manipulation allows peaks generation by inhomogeneous local absorption sustained by nanoscale convection. The obtained high aspect-ratio surface nanotopography is expected to prevent bacterial proliferation, and have great potential for catalysis, vacuum to deep UV photonics and sensing.
| S-EPMC9313481 | biostudies-literature
Project description:High enhancement of fluorescence emission, improved fluorophore photostability, and significant reduction of fluorescence lifetimes have been obtained from high aspect ratio (>100) silver (Ag) nanowires. These quantities are found to depend on the surface loading of Ag nanowires on glass slides, where the enhancement of fluorescence emission increases with the density of nanowires. The surface loading dependence was attributed to the creation of intense electric fields around the network of Ag nanowires and to the coupling of fluorophore excited states that takes place efficiently at a distance of 10 nm from the surface of nanowires, which was confirmed by theoretical calculations. The enhancement of fluorescence emission of fluorescein isothiocyanate (FITC) was assessed by fluorescence spectroscopy and fluorescence-lifetime imaging microscopy (FLIM) to demonstrate the potential of high aspect ratio Ag nanowires. Fluorescence enhancement factors exceeding 14 were observed on Ag nanowires with high loading by FLIM. The photostability of FITC was the highest on nanowires with medium loading under continuous laser excitation for 10 min because of the significant reduction in the fluorescence lifetime of FITC on these surfaces. These results clearly demonstrate the potential of Ag nanowires in metal-enhanced fluorescence-based applications of biosensing on planar surfaces and cellular imaging.
| S-EPMC4291037 | biostudies-literature
Project description:Here in, the fs-laser induced thermophoretic writing of microstructures in ad-hoc compositionally designed silicate glasses and their application as infrared optical waveguides is reported. The glass modification mechanism mimics the elemental thermal diffusion occurring in basaltic liquids at the Earth's mantle, but in a much shorter time scale (108 times faster) and over a well-defined micrometric volume. The precise addition of BaO, Na2O and K2O to the silicate glass enables the creation of positive refractive index contrast upon fs-laser irradiation. The influence of the focal volume and the induced temperature gradient is thoroughly analyzed, leading to a variety of structures with refractive index contrasts as high as 2.5 × 10-2. Two independent methods, namely near field measurements and electronic polarizability analysis, confirm the magnitude of the refractive index on the modified regions. Additionally, the functionality of the microstructures as waveguides is further optimized by lowering their propagation losses, enabling their implementation in a wide range of photonic devices.
| S-EPMC8052338 | biostudies-literature
Project description:The paper aims to study the mechanical properties of epoxy resin filled with clay nanoparticles (NPs), depending on their shapes and content on the surface of a modifying agent capable of forming covalent bonds with a polymer. The cylindrical clay nanoparticles with equal volume and different aspects ratios (disks, barrel, and stick) are addressed. The NPs' bonding ratio with the polymer (RGC) is determined by the fraction of reactive groups and conversion time and varies from RGC = 0 (non-bonded nanoparticles) to RGC = 0.65 (more than half of the surface groups are linked with the polymer matrix). The performed simulations show the so-called load-bearing chains (LBCs) of chemically cross-linked monomers and modified nanoparticles to determine the mechanical properties of the simulated composites. The introduction of nanoparticles leads to the breaking of such chains, and the chemical cross-linking of NPs with the polymer matrix restores the LBCs and strengthens the composite. At small values of RGC, the largest value of the elastic modulus is found for systems filled with nanoparticles having the smallest surface area, and at high values of RGC, on the contrary, the systems containing disk-shaped particles with the largest surface area have a larger elastic modulus than the others. All calculations are performed within the framework of a mesoscopic model based on accurate mapping of the atomistic structures of the polymer matrix and nanoparticles into coarse-grained representations, which, if necessary, allow reverse data mapping and quantitative assessment of the state of the filled epoxy resin. On the other hand, the obtained data can be used to design the functional materials with specified mechanical properties based on other practically significant polymer matrices and nanofillers.
| S-EPMC8587117 | biostudies-literature
Project description:Three-dimensional integrated circuits (3D ICs) are an attractive replacement for conventional 2D ICs as high-performance, low-power-consumption, and small-footprint microelectronic devices. However, one of the major remaining challenges is the manufacture of high-aspect-ratio through-silicon vias (TSVs), which is a crucial technology for the assembly of 3D Si ICs. Here, we present the fabrication of high-quality TSVs using a femtosecond (fs) 1.5-?m Bessel beam. To eliminate the severe ablation caused by the sidelobes of a conventional Bessel beam, a fs Bessel beam is tailored using a specially designed binary phase plate. We demonstrate that the tailored fs Bessel beam can be used to fabricate a 2D array of approximately ?10-?m TSVs on a 100-?m-thick Si substrate without any sidelobe damage, suggesting potential application in the 3D assembly of 3D Si ICs.
| S-EPMC5241677 | biostudies-literature
Project description:We report on an optimized fabrication protocol for obtaining silver nanoparticles on fused silica substrates via laser photoreduction of a silver salt solution. We find that multiple scans of the laser over the surface leads to a more uniform coverage of densely packed silver nanoparticles of approximately 50 nm diameter on the fused silica surface. Our substrates yield Raman enhancement factors of the order of 1011 of the signal detected from crystal violet. We use a theoretical model based on scanning electron microscope (SEM) images of our substrates to explain our experimental results. We also demonstrate how our technique can be extended to embedding silver nanoparticles in buried microfluidic channels in glass. The in situ laser inscription of silver nanoparticles on a laser machined, sub-surface, microfluidic channel wall within bulk glass paves the way for developing 3D, monolithic, fused silica surface enhance Raman spectroscopy (SERS) microfluidic sensing devices.
| S-EPMC6864074 | biostudies-literature
Project description:Thin layer two-dimensional (2-D) transition metal dichalcogenide (TMD) materials have distinctive optoelectronic properties. Therefore, several methods including mechanical exfoliation, chemical vapor deposition, and liquid-phase exfoliation have been attempted to obtain uniform TMDs. However, such methods do not easily produce high-quality few-layer TMDs with high speed. Here, we report the successful fabrication of few-layer TMD materials by femtosecond laser irradiation. It shows that TMD samples can be exfoliated from bulk to ~3 layers. This method is much faster and simpler than other exfoliation methods. The size and number of the layers were confirmed by atomic force microscopy, scanning electron microscopy, Raman spectroscopy, and photoluminescence experiments. It is expected to be used for the mass production of thin 2-D TMD materials.
| S-EPMC6113326 | biostudies-literature
Project description:Nanoparticles generated during laser material processing are often seen as annoying side products, yet they might find useful application upon proper collection. We present a parametric study to identify the dominant factors in nanoparticle removal and collection with the goal of establishing an in situ removal method during femtosecond laser machining. Several target materials of different electrical resistivity, such as Cu, Ti, and Si were laser machined at a relatively high laser fluence. Machining was performed under three different charge conditions, i.e., machining without an externally applied charge (alike atmospheric pulsed laser deposition (PLD)) was compared to machining with a floating potential and with an applied field. Thereby, we investigated the influence of three different charge conditions on the behavior of laser-generated nanoparticles, in particular considering plume deflection, nanoparticle accumulation on a collector plate and their redeposition onto the target. We found that both strategies, machining under a floating potential or under an applied field, were effective for collecting laser-generated nanoparticles. The applied field condition led to the strongest confinement of the nanoparticle plume and tightest resulting nanoparticle collection pattern. Raster-scanning direction was found to influence the nanoparticle collection pattern and ablation depth. However, the laser-processed target surface remained unaffected by the chosen nanoparticle collection strategy. We conclude that machining under a floating potential or an applied field is a promising setup for removing and collecting nanoparticles during the machining process, and thus provides an outlook to circular waste-free laser process design.
| S-EPMC8467671 | biostudies-literature
Project description:Direct femtosecond laser writing of tracks in the volume of silver-containing zinc phosphate glass is investigated. Tracks were written by the femtosecond laser irradiation with the wavelength of 1030?nm, the pulse duration of 180 fs and a scanning speed of 1?mm/s. The data shows the effect of the pulse repetition rate (10, 100 and 500?kHz) and the pulse energy (60–120 nJ) on the microstructure and optical properties of the laser-written tracks. The data was collected by optical microscopy in the brightfield and fluorescence mode. Moreover, the data shows the dependence of the width and height of the laser-written tracks on the pulse energy and pulse repetition rate.
| S-EPMC7786011 | biostudies-literature
Project description:Recently, the effect of nanograting formation was demonstrated for binary sodium borate glass with the possibility of data storage with an enhanced level of security. The obvious disadvantage of such glass is poor chemical stability, which limits real applications. In this paper, we show that the introduction of Al2O3 allows preserving the possibility of nanograting formation with a significant increase of chemical resistance and thus to preserve optical memory applications. On the other hand, the possibility of selective etching of laser-written tracks by means of distilled water is revealed, which was not demonstrated for other types of glasses. The dependence of retardance of nanogratings form birefringence on laser writing parameters is established and discussed. Structural features of laser-modified microdomains are studied via Raman spectroscopy which revealed an increase of three-coordinated boron content. A possible mechanism of selective etching is discussed.
| S-EPMC8509244 | biostudies-literature