Metallocene Catalytic Insertion Polymerization of 1-Silene to Polycarbosilanes.
Ontology highlight
ABSTRACT:
SUBMITTER: Tian Y
PROVIDER: S-EPMC4635340 | biostudies-other | 2015
REPOSITORIES: biostudies-other
Similar Datasets
Project description:We report the synthesis of cationic cobaltocenium and neutral ferrocene containing homopolymers mediated by photoinduced reversible addition-fragmentation chain transfer (RAFT) polymerization with a photocatalyst fac-[Ir(ppy)3]. The homopolymers were further used as macromolecular chain transfer agents to synthesize diblock copolymers via chain extension. Controlled/"living" feature of photoinduced RAFT polymerization was confirmed by kinetic studies even without prior deoxygenation. A light switch between ON and OFF provided a spatiotemporal control of polymerization.
| S-EPMC5739086 | biostudies-literature
Project description:In single-site olefin polymerization catalysis, a large excess of cocatalyst is often required for the generation of highly active catalysts, but the reason for this is unclear. In this work, fundamental insight into the multifaceted role of cocatalyst methylaluminoxane (MAO) in the activation, deactivation, and stabilization of group 4 metallocenes in the immobilized single-site olefin polymerization catalyst was gained. Employing probe molecule FT-IR spectroscopy, it was found that weak Lewis acid sites, inherent to the silica-supported MAO cocatalyst, are the main responsible species for the genesis of active metallocenes for olefin polymerization. These weak Lewis acid sites are the origin of AlMe2+ groups. Deactivation of metallocenes is caused by the presence of silanol groups on the silica support. Interaction of the catalyst precursor with these silanol groups leads to the irreversible formation of inactive metallocenes. Importantly, a high concentration of MAO (14 wt% Al) on the silica support is necessary to keep the metallocenes immobilized, hence preventing metallocene leaching and consequent reactor fouling. Increasing the loading of the MAO cocatalyst leads to larger amounts of AlMe2+, fewer silanol groups, and less metallocene leaching, which all result in higher olefin polymerization activity.
| S-EPMC5997399 | biostudies-literature
Project description:Single-site polymerization catalysts enable exquisite control over alkene polymerization reactions to produce new materials with unique properties. Knowledge of catalyst speciation and fundamental kinetics are essential for full mechanistic understanding of zirconocene-catalyzed alkene polymerization. Currently the effect of activators on fundamental polymerization steps is not understood. Progress in understanding activator effects requires determination of fundamental kinetics for zirconocene catalysts with noncoordinating anions such as [B(C6F5)4]-. Kinetic NMR studies at low temperature demonstrate a very fast propagation rate for 1-hexene polymerization catalyzed by [(SBI)Zr(CH2SiMe3)][B(C6F5)4] [where SBI is rac-Me2Si(indenyl)2] with complete consumption of 1-hexene before the first NMR spectrum. Surprisingly, the first NMR spectrum reveals, aside from uninitiated catalyst, Zr-allyls as the sole catalyst-containing species. These Zr-allyls, which exist in two diastereomeric forms, have been characterized by physical and chemical methods. The mechanism of Zr-allyl formation was probed with a trapping experiment, leading us to favor a mechanism in which Zr-polymeryl undergoes beta-H transfer to metal without dissociation of coordinated alkene followed by sigma-bond metathesis to form H2 and Zr-allyl. Zr-allyl species undergo slow reactions with alkene but react rapidly with H2 to form hydrogenation products.
| S-EPMC1834834 | biostudies-other
Project description:The polymerization of α-olefins catalyzed by zirconium metallocene catalyst was systematically studied through experiments and density functional theory (DFT) calculations. Having achieved an agreement between theory and experiment, it was found that the effect of the catalyst ligand on the C[double bond, length as m-dash]C insertion reaction was significantly greater than that on the β-H elimination reaction. Therefore, the molecular weight of polymers can be increased by improving the activity of the C[double bond, length as m-dash]C insertion. In addition, in comparison with propylene, the chain length of α-olefins can directly affect the stereotacticity of polymerization products, owing to steric hindrance between the polymer chain and monomer.
| S-EPMC9341425 | biostudies-literature
Project description:Hafnium complexes have drawn attention for their application as post-metallocene catalysts with unique performance in olefin polymerization. In this work, a series of half-metallocene HfMe2 complexes, bearing a tetrahydroquinoline framework, as well as a series of [Namido,N,Caryl]HfMe2-type post-metallocene complexes, bearing a tetrahydrophenanthroline framework, were prepared; the structures of the prepared Hf complexes were unambiguously confirmed by X-ray crystallography. When the prepared complexes were reacted with anhydrous [(C18H37)2N(H)Me]+[B(C6F5)4]-, desired ion-pair complexes, in which (C18H37)2NMe coordinated to the Hf center, were cleanly afforded. The activated complexes generated from the half-metallocene complexes were inactive for the copolymerization of ethylene/propylene, while those generated from post-metallocene complexes were active. Complex bearing bulky isopropyl substituents (12) exhibited the highest activity. However, the activity was approximately half that of the prototype pyridylamido-Hf Dow catalyst. The comonomer incorporation capability was also inferior to that of the pyridylamido-Hf Dow catalyst. However, 12 performed well in the coordinative chain transfer polymerization performed in the presence of (octyl)2Zn, converting all the fed (octyl)2Zn to (polyolefinyl)2Zn with controlled lengths of the polyolefinyl chain.
| S-EPMC6680767 | biostudies-literature
Project description:Bis(1-methylethenyl-cyclopentadienyl)zirconium dichloride (7a) was prepared by a fulvene route. Photolysis at 0 degrees C with Pyrex-filtered UV light resulted in a rapid and complete intramolecular [2+2]cycloaddition reaction to yield the corresponding cyclobutylene-bridged ansa-zirconocene dichloride isomer (8a). This is one of the rare examples of an organic functional group chemistry that leads to carbon-carbon coupling at the framework of an intact sensitive group 4 bent metallocene complex. More sterically hindered open metallocenes that bear bulky isopropyl or tert-butyl substituents at their Cp rings in addition to the active 1-methylethenyl functional group undergo the photochemical ansa-metallocene ring closure reaction equally facile. The metallocene systems used and obtained in this study have served as transition metal components for the generation of active metallocene propene polymerization catalysts.
| S-EPMC1834832 | biostudies-literature
Project description:The first effective method for catalytic enantioselective insertions into O-H bonds has been developed. Specifically, a copper/bisazaferrocene catalyst couples alcohols such as 2-trimethylsilylethanol with alpha-aryl-alpha-diazo esters in high yield and good ee.
| S-EPMC2517123 | biostudies-literature
Project description:Kinetics-based differences in the early stage fragmentation of two structurally analogous silica-supported hafnocene- and zirconocene-based catalysts were observed during gas-phase ethylene polymerization at low pressures. A combination of focused ion beam-scanning electron microscopy (FIB-SEM) and nanoscale infrared photoinduced force microscopy (IR PiFM) revealed notable differences in the distribution of the support, polymer, and composite phases between the two catalyst materials. By means of time-resolved probe molecule infrared spectroscopy, correlations between this divergence in morphology and the kinetic behavior of the catalysts' active sites were established. The rate of polymer formation, a property that is inherently related to a catalyst's kinetics and the applied reaction conditions, ultimately governs mass transfer and thus the degree of homogeneity achieved during support fragmentation. In the absence of strong mass transfer limitations, a layer-by-layer mechanism dominates at the level of the individual catalyst support domains under the given experimental conditions.
| S-EPMC8611720 | biostudies-literature
Project description:The dimeric ?-diketiminato magnesium hydride, [(BDI)MgH]2, reacts at 80 °C with the terminal alkenes, 1-hexene, 1-octene, 3-phenyl-1-propene and 3,3-dimethyl-butene to provide the respective n-hexyl, n-octyl, 3-phenylpropyl and 3,3-dimethyl-butyl magnesium organometallics. The facility for and the regiodiscrimination of these reactions are profoundly affected by the steric demands of the alkene reagent. Reactions with the phenyl-substituted alkenes, styrene and 1,1-diphenylethene, require a more elevated temperature of 100 °C with styrene providing a mixture of the 2-phenylethyl and 1-phenylethyl products over 7 days. Although the reaction with 1,1-diphenylethene yields the magnesium 1,1-diphenylethyl derivative as the sole reaction product, only 64% conversion was achieved over a 21 day timeframe. Reactions with the ?,?-dienes, 1,5-hexadiene and 1,7-octadiene, provided divergent results. The initial 5-alkenyl magnesium reaction product of the shorter chain diene undergoes 5-exo-trig cyclisation via intramolecular carbomagnesiation to provide a cyclopentylmethyl derivative, which was shown by X-ray diffraction analysis to exist as a three-coordinate monomer. In contrast, 1,7-octadiene provided a mixture of two compounds, a magnesium oct-7-en-1-yl derivative and a dimagnesium-octane-1,4-diide, as a result of single or two-fold activation of the terminal C[double bond, length as m-dash]C double bonds. The magnesium hydride was unreactive towards internal alkenes apart from the strained bicycle, norbornene, allowing the characterisation of the resultant three-coordinate magnesium norbornyl derivative by X-ray diffraction analysis. Computational analysis of the reaction between [(BDI)MgH]2 and 1-hexene using density functional theory (DFT) indicated that the initial Mg-H/C[double bond, length as m-dash]C insertion process is rate determining and takes place at the intact magnesium hydride dimer. This exothermic reaction (?H = -14.1 kcal mol-1) traverses a barrier of 18.9 kcal mol-1 and results in the rupture of the dinuclear structure into magnesium alkyl and hydride species. Although the latter three-coordinate hydride derivative may be prone to redimerisation, it can also provide a further pathway to magnesium alkyl species through its direct reaction with a further equivalent of 1-hexene, which occurs via a lower barrier of 15.1 kcal mol-1. This Mg-H/C[double bond, length as m-dash]C insertion reactivity provides the basis for the catalytic hydrosilylation of terminal alkenes with PhSiH3, which proceeds with a preference for the formation of the anti-Markovnikov organosilane product. Further DFT calculations reveal that the catalytic reaction is predicated on a sequence of Mg-H/C[double bond, length as m-dash]C insertion and classical Si-H/Mg-C ?-bond metathesis reactions, the latter of which, with a barrier height of 24.9 kcal mol-1, is found to be rate determining.
| S-EPMC6839609 | biostudies-literature
Project description:Norbornene derivatives are typical monomers for ring-opening metathesis polymerization (ROMP) for synthesizing highly functional polymers. However, the lack of catalytic methods, that is, the lack of readily available chain transfer agents (CTAs) for these monomers has been a significant cost limitation when large-scale syntheses are required. Here, we report commercially available styrene and its derivatives as efficient regioselective CTAs for the catalytic synthesis of metathesis polymers requiring up to 1000 times less ruthenium than in classical ROMP experiments. The molecular weight of the synthesized polymers was controlled by the monomer-to-CTA ratio. Low molecular weight ROMP polymers known for their antimicrobial properties were also synthesized on a gram scale in this report. Polymers were characterized by SEC, 1H NMR spectroscopy, and isotopically resolved MALDI-TOF MS. This approach describes a greener, more cost-effective, and eco-friendly methodology for the preparation of metathesis-based materials on the multigram scale.
| S-EPMC9795566 | biostudies-literature