Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A low cost, green method to synthesize GaN nanowires.

ABSTRACT: The synthesis of gallium nitride nanowires (GaN NWs) by plasma enhanced chemical vapor deposition (PECVD) are successfully demonstrated in this work. The simple and green synthesis route is to introduce gallium oxide (Ga2O3) and nitrogen (N2) for the growth of nanowires. The prepared GaN nanowires have a single crystalline wurtzite structure, which the length of some nanowires is up to 20 μm, with a maximum diameter about 140 nm. The morphology and quantity of the nanowires can be modulated by the growth substrate and process parameters. In addition, the photoluminescence and field emission properties of the prepared GaN nanowires have been investigated, which were found to be largely affected by their structures. This work renders an environmentally benign strategy and a facile approach for controllable structures on nanodevice.

SUBMITTER: Zhao JW

PROVIDER: S-EPMC4672344 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Low-cost photolithographic fabrication of nanowires and microfilters for advanced bioassay devices.

Project description:Integrated microfluidic devices with nanosized array electrodes and microfiltration capabilities can greatly increase sensitivity and enhance automation in immunoassay devices. In this contribution, we utilize the edge-patterning method of thin aluminum (Al) films in order to form nano- to micron-sized gaps. Evaporation of high work-function metals (i.e., Au, Ag, etc.) on these gaps, followed by Al lift-off, enables the formation of electrical uniform nanowires from low-cost, plastic-based, photomasks. By replacing Al with chromium (Cr), the formation of high resolution, custom-made photomasks that are ideal for low-cost fabrication of a plurality of array devices were realized. To demonstrate the feasibility of such Cr photomasks, SU-8 micro-pillar masters were formed and replicated into PDMS to produce micron-sized filters with 3-4 µm gaps and an aspect ratio of 3. These microfilters were capable of retaining 6 µm beads within a localized site, while allowing solvent flow. The combination of nanowire arrays and micro-pillar filtration opens new perspectives for rapid R&D screening of various microfluidic-based immunoassay geometries, where analyte pre-concentration and highly sensitive, electrochemical detection can be readily co-localized.

| S-EPMC4435220 | biostudies-literature

TEQUILA-seq: a versatile and low-cost method for targeted long-read RNA sequencing

Project description:Long-read RNA sequencing (RNA-seq) is a powerful technology for transcriptome analysis, but the relatively low throughput of current long-read sequencing platforms limits transcript coverage. We present TEQUILA-seq, a versatile, easy-to-implement, and low-cost method for targeted long-read RNA-seq. TEQUILA-seq can be broadly used for targeted sequencing of full-length transcripts in diverse biomedical research settings.

2023-06-06 | GSE213984 | GEO

Pt nanoclusters on GaN nanowires for solar-asssisted seawater hydrogen evolution.

Project description:Seawater electrolysis provides a viable method to produce clean hydrogen fuel. To date, however, the realization of high performance photocathodes for seawater hydrogen evolution reaction has remained challenging. Here, we introduce n+-p Si photocathodes with dramatically improved activity and stability for hydrogen evolution reaction in seawater, modified by Pt nanoclusters anchored on GaN nanowires. We find that Pt-Ga sites at the Pt/GaN interface promote the dissociation of water molecules and spilling H* over to neighboring Pt atoms for efficient H2 production. Pt/GaN/Si photocathodes achieve a current density of -10 mA/cm2 at 0.15 and 0.39 V vs. RHE and high applied bias photon-to-current efficiency of 1.7% and 7.9% in seawater (pH = 8.2) and phosphate-buffered seawater (pH = 7.4), respectively. We further demonstrate a record-high photocurrent density of ~169 mA/cm2 under concentrated solar light (9 suns). Moreover, Pt/GaN/Si can continuously produce H2 even under dark conditions by simply switching the electrical contact. This work provides valuable guidelines to design an efficient, stable, and energy-saving electrode for H2 generation by seawater splitting.

| S-EPMC9837051 | biostudies-literature

A combustion method to synthesize nanoporous graphene.

Project description:In this paper, we introduce a combustion method which is rapid, low cost, mass-producing and environmentally friendly to produce nanoporous graphene. After loading a graphene oxide aerogel (GOA)/paper (GOP) on a preheated hot plate (as the heat source, with a temperature as low as 200 °C) under an ambient environment, in a few seconds, the GOA/GOP would self-combust and change into reduced graphene oxide (RGO) with nanopores mainly concentrated in the 0.4-2.0 nm range and a large specific surface area of 536 m2 g-1. Supercapacitors fabricated with the synthesized porous RGO (P-RGO) showed a high specific capacitance of 245 F g-1 at 0.1 A g-1, and a retention rate of about 96.9% after 12 000 cycle tests with respect to the initial specific capacitance with a scan rate of 10.0 A g-1. The production yield of this method was as high as 77.0%.

| S-EPMC9078665 | biostudies-literature

Fabrication of vertical GaN/InGaN heterostructure nanowires using Ni-Au bi-metal catalysts.

Project description:We have fabricated the vertically aligned coaxial or longitudinal heterostructure GaN/InGaN nanowires. The GaN nanowires are first vertically grown by vapor-liquid-solid mechanism using Au/Ni bi-metal catalysts. The GaN nanowires are single crystal grown in the [0001] direction, with a length and diameter of 1 to 10 ?m and 100 nm, respectively. The vertical GaN/InGaN coaxial heterostructure nanowires (COHN) are then fabricated by the subsequent deposition of 2 nm of InxGa1-xN shell on the surface of GaN nanowires. The vertical GaN/InGaN longitudinal heterostructure nanowires (LOHN) are also fabricated by subsequent growth of an InGaN layer on the vertically aligned GaN nanowires using the catalyst. The photoluminescence from the COHN and LOHN indicates that the optical properties of GaN nanowires can be tuned by the formation of a coaxial or longitudinal InGaN layer. Our study demonstrates that the bi-metal catalysts are useful for growing vertical as well as heterostructure GaN nanowires. These vertically aligned GaN/InGaN heterostructure nanowires may be useful for the development of high-performance optoelectronic devices.

| S-EPMC3720202 | biostudies-literature

Stable and Reversible Photoluminescence from GaN Nanowires in Solution Tuning by Ionic Concentration.

Project description:We report response of photoluminescence (PL) from GaN nanowires without protection in solutions. The distinct response is not only toward pH but toward ionic concentration under same pH. The nanowires appear to be highly stable under aqueous solution with high ionic concentration and low pH value down to 1. We show that the PL has a reversible interaction with various types of acidic and salt solutions. The quantum states of nanowires are exposed to the external environment and have a direct physical interaction which depends on the anions of the acids. As the ionic concentration increases, the PL intensity goes up or down depending on the chemical species. The response results from a competition of change in surface band bending and charge transfer to redox level in solution. That of GaN films is reported for comparison as the effect of surface band bending can be neglected so that there are only slight variations in PL intensity for GaN films. Additionally, such physical interaction does not impact on the PL peaks in acids and salts, whereas there is a red shift on PL when the nanowires are in basic solution, say NH4OH, due to chemical etching occurred on the nanowires.

| S-EPMC7952484 | biostudies-literature

Top-down fabrication of ordered arrays of GaN nanowires by selective area sublimation.

Project description:We demonstrate the top-down fabrication of ordered arrays of GaN nanowires by selective area sublimation of pre-patterned GaN(0001) layers grown by hydride vapor phase epitaxy on Al2O3. Arrays with nanowire diameters and spacings ranging from 50 to 90 nm and 0.1 to 0.7 μm, respectively, are simultaneously produced under identical conditions. The sublimation process, carried out under high vacuum conditions, is analyzed in situ by reflection high-energy electron diffraction and line-of-sight quadrupole mass spectrometry. During the sublimation process, the GaN(0001) surface vanishes, giving way to the formation of semi-polar {11̄03} facets which decompose congruently following an Arrhenius temperature dependence with an activation energy of (3.54 ± 0.07) eV and an exponential prefactor of 1.58 × 1031 atoms per cm2 per s. The analysis of the samples by low-temperature cathodoluminescence spectroscopy reveals that, in contrast to dry etching, the sublimation process does not introduce nonradiative recombination centers at the nanowire sidewalls. This technique is suitable for the top-down fabrication of a variety of ordered nanostructures, and could possibly be extended to other material systems with similar crystallographic properties such as ZnO.

| S-EPMC9417832 | biostudies-literature

Near-Field Control and Imaging of Free Charge Carrier Variations in GaN Nanowires.

Project description:Despite their uniform crystallinity, the shape and faceting of semiconducting nanowires (NWs) can give rise to variations in structure and associated electronic properties. Here we develop a hybrid scanning probe-based methodology to investigate local variations in electronic structure across individual n-doped GaN NWs integrated into a transistor device. We perform scanning microwave microscopy (SMM), which we combine with scanning gate microscopy (SGM) to determine the free-carrier SMM signal contribution and image local charge carrier density variations. In particular, we find significant variations in free carriers across NWs, with a higher carrier density at the wire facets. By increasing the local carrier density through tip-gating, we find that the tip injects current into the NW with strongly localized current when positioned over the wire vertices. These results suggest that the strong variations in electronic properties observed within NWs have significant implications for device design and may lead to new paths to optimization.

| S-EPMC10938853 | biostudies-literature

New Disposable Nitric Oxide Sensor Fabrication Using GaN Nanowires.

Project description:Gallium nitride (GaN) nanowires anchored on the surface of cost-effective pencil graphite electrodes (PGEs) have been developed as a new disposable nitric oxide (NO) sensor through a hydrothermal method followed by annealing treatment. The as-obtained nanomaterials were examined by field emission scanning electron microscopy, high-resolution transmission electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and EIS. Concurrently, the electrocatalytic performance has been analyzed using cyclic voltammetry and amperometric measurements. The experimental results exhibit good electrochemical sensing performance toward the generated NO in NO2 - with a wide linear detection range of 1.0 μM to 1.0 mM with a correlation coefficient of 0.999 and a detection limit of 0.180 μM. In addition, the GaN nanowire-modified PGE surface showed high selectivity for the detection of NO as compared to other relevant biomolecules. This confirms that the PGE/GaN nanowire is a new promising electrochemical sensor for the sensitive detection of NO.

| S-EPMC6811847 | biostudies-other

Low-cost RNA extraction method for highly scalable transcriptome studies.

Project description:RNA extraction has been improved by integration of a variety of materials in the protocol, such as phenol, guanidine thiocyanate, and silica, according to the case-specific demands. However, few methods have been designed for high-throughput RNA preparation for large-scale transcriptome studies. In this study, we established a high-throughput guanidinium thiocyanate and isopropyl alcohol based RNA extraction method (HighGI). HighGI is based on simple and phenol-free homemade buffers and the cost is substantially lower than a column-based commercial kit. We demonstrated that the quality and quantity of RNA extracted with HighGI were comparable to those extracted with a conventional phenol/chloroform-based method and a column-based commercial kit. HighGI retained small RNAs less than 200 bp, which are lost with a commercial column-based kit. We also demonstrated that HighGI is readily applicable to semi-automated RNA extraction. HighGI enables high-throughput RNA extraction for large-scale RNA preparation with high yield and quality.

| S-EPMC7495201 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data