Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Physical Modeling of Gate-Controlled Schottky Barrier Lowering of Metal-Graphene Contacts in Top-Gated Graphene Field-Effect Transistors.

ABSTRACT: A new physical model of the gate controlled Schottky barrier height (SBH) lowering in top-gated graphene field-effect transistors (GFETs) under saturation bias condition is proposed based on the energy conservation equation with the balance assumption. The theoretical prediction of the SBH lowering agrees well with the experimental data reported in literatures. The reduction of the SBH increases with the increasing of gate voltage and relative dielectric constant of the gate oxide, while it decreases with the increasing of oxide thickness, channel length and acceptor density. The magnitude of the reduction is slightly enhanced under high drain voltage. Moreover, it is found that the gate oxide materials with large relative dielectric constant (>20) have a significant effect on the gate controlled SBH lowering, implying that the energy relaxation of channel electrons should be taken into account for modeling SBH in GFETs.

SUBMITTER: Mao LF

PROVIDER: S-EPMC4682133 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

High-kappa oxide nanoribbons as gate dielectrics for high mobility top-gated graphene transistors.

Project description:Deposition of high-kappa dielectrics onto graphene is of significant challenge due to the difficulties of nucleating high quality oxide on pristine graphene without introducing defects into the monolayer of carbon lattice. Previous efforts to deposit high-kappa dielectrics on graphene often resulted in significant degradation in carrier mobility. Here we report an entirely new strategy to integrate high quality high-kappa dielectrics with graphene by first synthesizing freestanding high-kappa oxide nanoribbons at high temperature and then transferring them onto graphene at room temperature. We show that single crystalline Al(2)O(3) nanoribbons can be synthesized with excellent dielectric properties. Using such nanoribbons as the gate dielectrics, we have demonstrated top-gated graphene transistors with the highest carrier mobility (up to 23,600 cm(2)/V x s) reported to date, and a more than 10-fold increase in transconductance compared to the back-gated devices. This method opens a new avenue to integrate high-kappa dielectrics on graphene with the preservation of the pristine nature of graphene and high carrier mobility, representing an important step forward to high-performance graphene electronics.

| S-EPMC2872405 | biostudies-literature

Novel field-effect Schottky barrier transistors based on graphene-MoS2 heterojunctions.

Project description:Recently, two-dimensional materials such as molybdenum disulphide (MoS2) have been demonstrated to realize field effect transistors (FET) with a large current on-off ratio. However, the carrier mobility in backgate MoS2 FET is rather low (typically 0.5-20 cm(2)/V · s). Here, we report a novel field-effect Schottky barrier transistors (FESBT) based on graphene-MoS2 heterojunction (GMH), where the characteristics of high mobility from graphene and high on-off ratio from MoS2 are properly balanced in the novel transistors. Large modulation on the device current (on/off ratio of 10(5)) is achieved by adjusting the backgate (through 300 nm SiO2) voltage to modulate the graphene-MoS2 Schottky barrier. Moreover, the field effective mobility of the FESBT is up to 58.7 cm(2)/V · s. Our theoretical analysis shows that if the thickness of oxide is further reduced, a subthreshold swing (SS) of 40 mV/decade can be maintained within three orders of drain current at room temperature. This provides an opportunity to overcome the limitation of 60 mV/decade for conventional CMOS devices. The FESBT implemented with a high on-off ratio, a relatively high mobility and a low subthreshold promises low-voltage and low-power applications for future electronics.

| S-EPMC4127518 | biostudies-literature

Top-gated chemical vapor deposition grown graphene transistors with current saturation.

Project description:Graphene transistors are of considerable interest for radio frequency (rf) applications. In general, transistors with large transconductance and drain current saturation are desirable for rf performance, which is however nontrivial to achieve in graphene transistors. Here we report high-performance top-gated graphene transistors based on chemical vapor deposition (CVD) grown graphene with large transconductance and drain current saturation. The graphene transistors were fabricated with evaporated high dielectric constant material (HfO(2)) as the top-gate dielectrics. Length scaling studies of the transistors with channel length from 5.6 ?m to 100 nm show that complete current saturation can be achieved in 5.6 ?m devices and the saturation characteristics degrade as the channel length shrinks down to the 100-300 nm regime. The drain current saturation was primarily attributed to drain bias induced shift of the Dirac points. With the selective deposition of HfO(2) gate dielectrics, we have further demonstrated a simple scheme to realize a 300 nm channel length graphene transistors with self-aligned source-drain electrodes to achieve the highest transconductance of 250 ?S/?m reported in CVD graphene to date.

| S-EPMC3236244 | biostudies-literature

High-Gain Graphene Transistors with a Thin AlOx Top-Gate Oxide.

Project description:The high-frequency performance of transistors is usually assessed by speed and gain figures of merit, such as the maximum oscillation frequency f max, cutoff frequency f T, ratio f max/f T, forward transmission coefficient S 21, and open-circuit voltage gain A v. All these figures of merit must be as large as possible for transistors to be useful in practical electronics applications. Here we demonstrate high-performance graphene field-effect transistors (GFETs) with a thin AlOx gate dielectric which outperform previous state-of-the-art GFETs: we obtained f max/f T?>?3, A v?>?30?dB, and S 21?=?12.5?dB (at 10?MHz and depending on the transistor geometry) from S-parameter measurements. A dc characterization of GFETs in ambient conditions reveals good current saturation and relatively large transconductance ~600?S/m. The realized GFETs offer the prospect of using graphene in a much wider range of electronic applications which require substantial gain.

| S-EPMC5445082 | biostudies-other

Schottky Barrier Height and Image Force Lowering in Monolayer MoS<sub>2</sub> Field Effect Transistors.

Project description:Understanding the nature of the barrier height in a two-dimensional semiconductor/metal interface is an important step for embedding layered materials in future electronic devices. We present direct measurement of the Schottky barrier height and its lowering in the transition metal dichalcogenide (TMD)/metal interface of a field effect transistor. It is found that the barrier height at the gold/ single-layer molybdenum disulfide (MoS2) interfaces decreases with increasing drain voltage, and this lowering reaches 0.5-1 V We also show that increase of the gate voltage induces additional barrier lowering.

| S-EPMC7761329 | biostudies-literature

Tuning Schottky Barrier of Single-Layer MoS<sub>2</sub> Field-Effect Transistors with Graphene Electrodes.

Project description:Two-dimensional materials have the potential to be applied in flexible and transparent electronics. In this study, single-layer MoS2 field-effect transistors (FETs) with Au/Ti-graphene heteroelectrodes were fabricated to examine the effect of the electrodes on the electrical properties of the MoS2 FETs. The contact barrier potential was tuned using an electric field. Asymmetrical gate behavior was observed owing to the difference between the MoS2 FETs, specifically between the MoS2 FETs with Au/Ti electrodes and those with graphene electrodes. The contact barrier of the MoS2 FETs with Au/Ti electrodes did not change with the electric field. However, the contact barrier at the MoS2-graphene interface could be modulated. The MoS2 FETs with Au/Ti-graphene electrodes exhibited enhanced on/off ratios (~102 times) and electron mobility (~2.5 times) compared to the MoS2 FETs with Au/Ti electrodes. These results could improve the understanding of desirable contact formation for high-performance MoS2 FETs and provide a facile route for viable electronic applications.

| S-EPMC9458018 | biostudies-literature

Gate Modulation of Graphene-ZnO Nanowire Schottky Diode.

Project description:Graphene-semiconductor interface is important for the applications in electronic and optoelectronic devices. Here we report the modulation of the electric transport properties of graphene/ZnO nanowire Schottky diode by gate voltage (Vg). The ideality factor of the graphene/ZnO nanowire Schottky diode is ~1.7, and the Schottky barrier height is ~0.28 eV without external Vg. The Schottky barrier height is sensitive to Vg due to the variation of Fermi level of graphene. The barrier height increases quickly with sweeping Vg towards the negative value, while decreases slowly towards the positive Vg. Our results are helpful to understand the fundamental mechanism of the electric transport in graphene-semiconductor Schottky diode.

| S-EPMC4421871 | biostudies-other

Analysing black phosphorus transistors using an analytic Schottky barrier MOSFET model.

Project description:Owing to the difficulties associated with substitutional doping of low-dimensional nanomaterials, most field-effect transistors built from carbon nanotubes, two-dimensional crystals and other low-dimensional channels are Schottky barrier MOSFETs (metal-oxide-semiconductor field-effect transistors). The transmission through a Schottky barrier-MOSFET is dominated by the gate-dependent transmission through the Schottky barriers at the metal-to-channel interfaces. This makes the use of conventional transistor models highly inappropriate and has lead researchers in the past frequently to extract incorrect intrinsic properties, for example, mobility, for many novel nanomaterials. Here we propose a simple modelling approach to quantitatively describe the transfer characteristics of Schottky barrier-MOSFETs from ultra-thin body materials accurately in the device off-state. In particular, after validating the model through the analysis of a set of ultra-thin silicon field-effect transistor data, we have successfully applied our approach to extract Schottky barrier heights for electrons and holes in black phosphorus devices for a large range of body thicknesses.

| S-EPMC4660372 | biostudies-literature

Low-Power Graphene/ZnO Schottky UV Photodiodes with Enhanced Lateral Schottky Barrier Homogeneity.

Project description:The low-power, high-performance graphene/ZnO Schottky photodiodes were demonstrated through the direct sputter-growth of ZnO onto the thermally-cleaned graphene/SiO2/Si substrate at room temperature. Prior to the growth of ZnO, a thermal treatment of the graphene surface was performed at 280 °C for 10 min in a vacuum to desorb chemical residues that may serve as trap sites at the interface between graphene and ZnO. The device clearly showed a rectifying behavior with the Schottky barrier of ≈0.61 eV and an ideality factor of 1.16. Under UV illumination, the device exhibited the excellent photoresponse characteristics in both forward and reverse bias regions. When illuminating UV light with the optical power density of 0.62 mW/cm2, the device revealed a high on/off current ratio of >103 even at a low bias voltage of 0.1 V. For the transient characteristics upon switching of UV light pulses, the device represented a fast and stable photoresponse (i.e., rise time: 0.16 s, decay time: 0.19 s). From the temperature-dependent current-voltage characteristics, such an outstanding photoresponse characteristic was found to arise from the enhanced Schottky barrier homogeneity via the thermal treatment of the graphene surface. The results suggest that the ZnO/graphene Schottky diode holds promise for the application in high-performance low-power UV photodetectors.

| S-EPMC6566797 | biostudies-literature

Schottky barrier lowering due to interface states in 2D heterophase devices.

Project description:The Schottky barrier of a metal-semiconductor junction is one of the key quantities affecting the charge transport in a transistor. The Schottky barrier height depends on several factors, such as work function difference, local atomic configuration in the interface, and impurity doping. We show that also the presence of interface states at 2D metal-semiconductor junctions can give rise to a large renormalization of the effective Schottky barrier determined from the temperature dependence of the current. We investigate the charge transport in n- and p-doped monolayer MoTe2 1T'-1H junctions using ab initio quantum transport calculations. The Schottky barriers are extracted both from the projected density of states and the transmission spectrum, and by simulating the IT-characteristic and applying the thermionic emission model. We find interface states originating from the metallic 1T' phase rather than the semiconducting 1H phase in contrast to the phenomenon of Fermi level pinning. Furthermore, we find that these interface states mediate large tunneling currents which dominates the charge transport and can lower the effective barrier to a value of only 55 meV.

| S-EPMC9418679 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data