Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Photoconductive terahertz generation from textured semiconductor materials.

ABSTRACT: Photoconductive (PC) terahertz (THz) emitters are often limited by ohmic loss and Joule heating-as these effects can lead to thermal runaway and premature device breakdown. To address this, the proposed work introduces PC THz emitters based on textured InP materials. The enhanced surface recombination and decreased charge-carrier lifetimes of the textured InP materials reduce residual photocurrents, following the picosecond THz waveform generation, and this diminishes Joule heating in the emitters. A non-textured InP material is used as a baseline for studies of fine- and coarse-textured InP materials. Ultrafast pump-probe and THz setups are used to measure the charge-carrier lifetimes and THz response/photocurrent consumption of the respective materials and emitters. It is found that similar temporal and spectral characteristics can be achieved with the THz emitters, but the level of photocurrent consumption (yielding Joule heating) is greatly reduced in the textured materials.

SUBMITTER: Collier CM

PROVIDER: S-EPMC4793249 | biostudies-other | 2016

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Enhanced Terahertz Radiation Generation of Photoconductive Antennas Based on Manganese Ferrite Nanoparticles.

Project description:This paper presents a significant effect of manganese ferrite nanoparticles (MnFe2O4 NPs) on the increase of the surface photoconductivity of semiconductors. Herein, the optical characterization of photo-excited carriers of silicon coated with MnFe2O4 NPs was studied by using THz time-domain spectroscopy (THz-TDs). We observed that silicon coated with MnFe2O4 NPs provided a significantly enhanced attenuation of THz radiation in comparison with bare silicon substrates under laser irradiation. The experimental results were assessed in the context of a surface band structure model of semiconductors. In addition, photoconductive antennas coated with MnFe2O4 NPs significantly improved the efficiency of THz radiation generation and signal to noise ratio of the THz signal. This work demonstrates that coating with MnFe2O4 NPs could improve the overall performance of THz systems, and MnFe2O4 NPs could be further used for the implementation of novel optical devices.

| S-EPMC5385867 | biostudies-literature

Room temperature terahertz semiconductor frequency comb.

Project description:A terahertz (THz) frequency comb capable of high-resolution measurement will significantly advance THz technology application in spectroscopy, metrology and sensing. The recently developed cryogenic-cooled THz quantum cascade laser (QCL) comb has exhibited great potentials with high power and broadband spectrum. Here, we report a room temperature THz harmonic frequency comb in 2.2 to 3.3 THz based on difference-frequency generation from a mid-IR QCL. The THz comb is intracavity generated via down-converting a mid-IR comb with an integrated mid-IR single mode based on distributed-feedback grating without using external optical elements. The grating Bragg wavelength is largely detuned from the gain peak to suppress the grating dispersion and support the comb operation in the high gain spectral range. Multiheterodyne spectroscopy with multiple equally spaced lines by beating it with a reference Fabry-Pérot comb confirms the THz comb operation. This type of THz comb will find applications to room temperature chip-based THz spectroscopy.

| S-EPMC6546691 | biostudies-literature

A modulation-doped heterostructure-based terahertz photoconductive antenna emitter with recessed metal contacts.

Project description:We present the implementation of an efficient terahertz (THz) photoconductive antenna (PCA) emitter design that utilizes high mobility carriers in the two-dimensional electron gas (2DEG) of a modulation-doped heterostructure (MDH). The PCA design is fabricated with recessed metal electrodes in direct contact with the 2DEG region of the MDH. We compare the performance of the MDH PCA having recessed contacts with a PCA fabricated on bulk semi-insulating GaAs, on low temperature-grown GaAs, and a MDH PCA with the contacts fabricated on the surface. By recessing the contacts, the applied bias can effectively accelerate the high-mobility carriers within the 2DEG, which increases the THz power emission by at least an order of magnitude compared to those with conventional structures. The dynamic range (62 dB) and bandwidth characteristics (3.2 THz) in the power spectrum are shown to be comparable with the reference samples. Drude-Lorentz simulations corroborate the results that the higher-mobility carriers in the MDH, increase the THz emission. The saturation characteristics were also measured via optical fluence dependence, revealing a lower saturation value compared to the reference samples. The high THz conversion efficiency of the MDH-PCA with recessed contacts at low optical power makes it an attractive candidate for THz-time domain spectroscopy systems powered by low power fiber lasers.

| S-EPMC7670445 | biostudies-literature

On-chip picosecond pulse detection and generation using graphene photoconductive switches.

Project description:We report on the use of graphene for room temperature on-chip detection and generation of pulsed terahertz (THz) frequency radiation, exploiting the fast carrier dynamics of light-generated hot carriers, and compare our results with conventional low-temperature-grown gallium arsenide (LT-GaAs) photoconductive (PC) switches. Coupling of picosecond-duration pulses from a biased graphene PC switch into Goubau line waveguides is also demonstrated. A Drude transport model based on the transient photoconductance of graphene is used to describe the mechanism for both detection and generation of THz radiation.

| S-EPMC4370719 | biostudies-literature

Homogeneous spectral spanning of terahertz semiconductor lasers with radio frequency modulation.

Project description:Homogeneous broadband and electrically pumped semiconductor radiation sources emitting in the terahertz regime are highly desirable for various applications, including spectroscopy, chemical sensing, and gas identification. In the frequency range between 1 and 5 THz, unipolar quantum cascade lasers employing electron inter-subband transitions in multiple-quantum-well structures are the most powerful semiconductor light sources. However, these devices are normally characterized by either a narrow emission spectrum due to the narrow gain bandwidth of the inter-subband optical transitions or an inhomogeneous broad terahertz spectrum from lasers with heterogeneous stacks of active regions. Here, we report the demonstration of homogeneous spectral spanning of long-cavity terahertz semiconductor quantum cascade lasers based on a bound-to-continuum and resonant phonon design under radio frequency modulation. At a single drive current, the terahertz spectrum under radio frequency modulation continuously spans 330 GHz (~8% of the central frequency), which is the record for single plasmon waveguide terahertz lasers with a bound-to-continuum design. The homogeneous broadband terahertz sources can be used for spectroscopic applications, i.e., GaAs etalon transmission measurement and ammonia gas identification.

| S-EPMC5341035 | biostudies-literature

Graphene-Coupled Terahertz Semiconductor Lasers for Enhanced Passive Frequency Comb Operation.

Project description:Optical frequency combs, consisting of well-controlled equidistant frequency lines, have been widely used in precision spectroscopy and metrology. Terahertz combs have been realized in quantum cascade lasers (QCLs) by employing either an active mode-locking or phase seeding technique, or a dispersion compensator mirror. However, it remains a challenge to achieve the passive comb formation in terahertz semiconductor lasers due to the insufficient nonlinearities of conventional saturable absorbers. Here, a passive terahertz frequency comb is demonstrated by coupling a multilayer graphene sample into a QCL compound cavity. The terahertz modes are self-stabilized with intermode beat note linewidths down to a record of 700 Hz and the comb operation of graphene-coupled QCLs is validated by on-chip dual-comb measurements. Furthermore, the optical pulse emitted from the graphene-coupled QCL is directly measured employing a terahertz pump-probe technique. The enhanced passive frequency comb operation is attributed to the saturable absorption behavior of the graphene-integrated saturable absorber mirror, as well as the dispersion compensation introduced by the graphene sample. The results provide a conceptually different graphene-based approach for passive comb formation in terahertz QCLs, opening up intriguing opportunities for fast and high-precision terahertz spectroscopy and nonlinear photonics.

| S-EPMC6794721 | biostudies-literature

Nano-antenna in a photoconductive photomixer for highly efficient continuous wave terahertz emission.

Project description:We report highly efficient continuous-wave terahertz (THz) photoconductive antenna based photomixer employing nano-gap electrodes in the active region. The tip-to-tip nano-gap electrode structure provides strong THz field enhancement and acts as a nano-antenna to radiate the THz wave generated in the active region of the photomixer. In addition, it provides good impedance matching to the THz planar antenna and exhibits a lower RC time constant, allowing more efficient radiation especially at the higher part of the THz spectrum. As a result, the output intensity of the photomixer with the new nano-gap electrode structure in the active region is two orders of magnitude higher than that of a photomixer with typical interdigitated electrodes. Significant improvement in the THz emission bandwidth was also observed. An efficient continuous wave THz source will greatly benefit compact THz system development for high resolution THz spectroscopy and imaging applications.

| S-EPMC3792413 | biostudies-other

Compound semiconductor nanotube materials grown and fabricated.

Project description:A new GaAs/InGaAs/InGaP compound semiconductor nanotube material structure was designed and fabricated in this work. A thin, InGaAs-strained material layer was designed in the nanotube structure, which can directionally roll up a strained heterostructure through a normal wet etching process. The compound semiconductor nanotube structure was grown by gas-source molecular beam epitaxy. A good crystalline quality of InGaP, InGaAs, and GaAs materials was obtained through optimizing the growth condition. The fabricated GaAs/InGaAs/InGaP semiconductor nanotubes, with a diameter of 300 to 350 nm and a length of 1.8 to 2.0 ?m, were achieved through normal device fabrication.

| S-EPMC3254589 | biostudies-literature

Field-resolved high-order sub-cycle nonlinearities in a terahertz semiconductor laser.

Project description:The exploitation of ultrafast electron dynamics in quantum cascade lasers (QCLs) holds enormous potential for intense, compact mode-locked terahertz (THz) sources, squeezed THz light, frequency mixers, and comb-based metrology systems. Yet the important sub-cycle dynamics have been notoriously difficult to access in operational THz QCLs. Here, we employ high-field THz pulses to perform the first ultrafast two-dimensional spectroscopy of a free-running THz QCL. Strong incoherent and coherent nonlinearities up to eight-wave mixing are detected below and above the laser threshold. These data not only reveal extremely short gain recovery times of 2 ps at the laser threshold, they also reflect the nonlinear polarization dynamics of the QCL laser transition for the first time, where we quantify the corresponding dephasing times between 0.9 and 1.5 ps with increasing bias currents. A density-matrix approach reproducing the emergence of all nonlinearities and their ultrafast evolution, simultaneously, allows us to map the coherently induced trajectory of the Bloch vector. The observed high-order multi-wave mixing nonlinearities benefit from resonant enhancement in the absence of absorption losses and bear potential for a number of future applications, ranging from efficient intracavity frequency conversion, mode proliferation to passive mode locking.

| S-EPMC8685277 | biostudies-literature

Terahertz Pulse Generation from GaAs Metasurfaces.

Project description:Ultrafast optical excitation of select materials gives rise to the generation of broadband terahertz (THz) pulses. This effect has enabled the field of THz time-domain spectroscopy and led to the discovery of many physical mechanisms behind THz generation. However, only a few materials possess the required properties to generate THz radiation efficiently. Optical metasurfaces can relax stringent material requirements by shifting the focus onto the engineering of local electromagnetic fields to boost THz generation. Here we demonstrate the generation of THz pulses in a 160 nm thick nanostructured GaAs metasurface. Despite the drastically reduced volume, the metasurface emits THz radiation with efficiency comparable to that of a thick GaAs crystal. We reveal that along with classical second-order volume nonlinearity, an additional mechanism contributes strongly to THz generation in the metasurface, which we attribute to surface nonlinearity. Our results lay the foundation for engineering of semiconductor metasurfaces for efficient and versatile THz radiation emitters.

| S-EPMC9097576 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data