Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Magnetic coherent tunnel junctions with periodic grating barrier.

ABSTRACT: A new spintronic theory has been developed for the magnetic tunnel junction (MTJ) with single-crystal barrier. The barrier will be treated as a diffraction grating with intralayer periodicity, the diffracted waves of tunneling electrons thus contain strong coherence, both in charge and especially in spin. The theory can answer the two basic problems present in MgO-based MTJs: (1) Why does the tunneling magnetoresistance (TMR) oscillate with the barrier thickness? (2) Why is the TMR still far away from infinity when the two electrodes are both half-metallic? Other principal features of TMR can also be explained and reproduced by the present work. It also provides possible ways to modulate the oscillation of TMR, and to enhance TMR so that it can tend to infinity. Within the theory, the barrier, as a periodic diffraction grating, can get rid of the confinement in width, it can vary from nanoscale to microscale. Based on those results, a future-generation MTJ is proposed where the three pieces can be fabricated separately and then assembled together, it is especially appropriate for the layered materials, e.g., MoS2 and graphite, and most feasible for industries.

SUBMITTER: Fang H

PROVIDER: S-EPMC4827029 | biostudies-other | 2016 Apr

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Kondo Effect in Magnetic Tunnel Junctions with an AlOx Tunnel Barrier.

Project description:The influence of the magnetization configuration on Kondo effect in magnetic tunnel junction is investigated. In the parallel configuration, an additional resistance contribution (R*) below 40 K exhibits a logarithmic temperature dependence, indicating the presence of Kondo effect. However, in the anti-parallel configuration, the Kondo-effect-associated spin-flip scattering has a nontrivial contribution to the tunneling current, which compensates the reduction of the current directly caused by Kondo scattering, making R* disappear. These results indicate that suppression and restoration of Kondo effect can be experimentally achieved by altering the magnetization configuration, enhancing our understanding of the role of Kondo effect in spin-dependent transport.

| S-EPMC5497476 | biostudies-other

Spin memristive magnetic tunnel junctions with CoO-ZnO nano composite barrier.

Project description:The spin memristive devices combining memristance and tunneling magnetoresistance have promising applications in multibit nonvolatile data storage and artificial neuronal computing. However, it is a great challenge for simultaneous realization of large memristance and magnetoresistance in one nanoscale junction, because it is very hard to find a proper spacer layer which not only serves as good insulating layer for tunneling magnetoresistance but also easily switches between high and low resistance states under electrical field. Here we firstly propose to use nanon composite barrier layers of CoO-ZnO to fabricate the spin memristive Co/CoO-ZnO/Co magnetic tunnel junctions. The bipolar resistance switching ratio is high up to 90, and the TMR ratio of the high resistance state gets to 8% at room temperature, which leads to three resistance states. The bipolar resistance switching is explained by the metal-insulator transition of CoO(1-v) layer due to the migration of oxygen ions between CoO(1-v) and ZnO(1-v).

| S-EPMC3899592 | biostudies-other

High Performance MgO-barrier Magnetic Tunnel Junctions for Flexible and Wearable Spintronic Applications.

Project description:The magnetic tunnel junction (MTJ) using MgO barrier is one of most important building blocks for spintronic devices and has been widely utilized as miniaturized magentic sensors. It could play an important role in wearable medical devices if they can be fabricated on flexible substrates. The required stringent fabrication processes to obtain high quality MgO-barrier MTJs, however, limit its integration with flexible electronics devices. In this work, we have developed a method to fabricate high-performance MgO-barrier MTJs directly onto ultrathin flexible silicon membrane with a thickness of 14 μm and then transfer-and-bond to plastic substrates. Remarkably, such flexible MTJs are fully functional, exhibiting a TMR ratio as high as 190% under bending radii as small as 5 mm. The devices' robustness is manifested by its retained excellent performance and unaltered TMR ratio after over 1000 bending cycles. The demonstrated flexible MgO-barrier MTJs opens the door to integrating high-performance spintronic devices in flexible and wearable electronics devices for a plethora of biomedical sensing applications.

| S-EPMC5288802 | biostudies-literature

Tunneling Magnetoresistance Transition and Highly Sensitive Pressure Sensors Based on Magnetic Tunnel Junctions with a Black Phosphorus Barrier.

Project description:Black phosphorus is a promising material to serve as a barrier for magnetic tunnel junctions (MTJs) due to weak van der Waals interlayer interactions. In particular, the special band features of black phosphorus may endow intriguing physical characteristics. Here we study theoretically the effect of band gap tunability of black phosphorus on the MTJs with the black phosphorus barrier. It is found that the tunneling magnetoresistance (TMR) may transition from a finite value to infinity owing to the variation in the band gap of black phosphorus. Combined with the latest experimental results of the pressure-induced band gap tunability, we further investigate the pressure effect of TMR in the MTJs with a black phosphorus barrier. The calculations show that the pressure sensitivity can be quite high under appropriate parameters. Physically, the high sensitivity originates from the TMR transition phenomenon. To take advantage of the high pressure sensitivity, we propose and design a detailed structure of highly sensitive pressure sensors based on MTJs with a black phosphorus barrier, whose working mechanism is basically different from that of convential pressure sensors. The present pressure sensors possess four advantages and benifits: (1) high sensitivity, (2) good anti-interference, (3) high spatial resolution, and (4) fast response speed. Our study may advance new research areas for both the MTJs and pressure sensors.

| S-EPMC9219071 | biostudies-literature

Strain-enhanced tunneling magnetoresistance in MgO magnetic tunnel junctions.

Project description:While the effects of lattice mismatch-induced strain, mechanical strain, as well as the intrinsic strain of thin films are sometimes detrimental, resulting in mechanical deformation and failure, strain can also be usefully harnessed for applications such as data storage, transistors, solar cells, and strain gauges, among other things. Here, we demonstrate that quantum transport across magnetic tunnel junctions (MTJs) can be significantly affected by the introduction of controllable mechanical strain, achieving an enhancement factor of ~2 in the experimental tunneling magnetoresistance (TMR) ratio. We further correlate this strain-enhanced TMR with coherent spin tunneling through the MgO barrier. Moreover, the strain-enhanced TMR is analyzed using non-equilibrium Green's function (NEGF) quantum transport calculations. Our results help elucidate the TMR mechanism at the atomic level and can provide a new way to enhance, as well as tune, the quantum properties in nanoscale materials and devices.

| S-EPMC4179128 | biostudies-literature

Gigantic tunneling magnetoresistance in magnetic Weyl semimetal tunnel junctions.

Project description:We investigate the tunneling magnetoresistance in magnetic tunnel junctions (MTJs) comprised of Weyl semimetal contacts. We show that chirality-magnetization locking leads to a gigantic tunneling magnetoresistance ratio, an effect that does not rely on spin filtering by the tunnel barrier. Our results indicate that the conductance in the anti-parallel configuration is more sensitive to magnetization fluctations than in MTJs with normal ferromagnets, and predicts a TMR as large as 104 % when realistic magnetization fluctuations are accounted for. In addition, we show that the Fermi arc states give rise to a non-monotonic dependence of conductance on the misalignment angle between the magnetizations of the two contacts.

| S-EPMC9982938 | biostudies-literature

Anomalous Tunnel Magnetoresistance and Spin Transfer Torque in Magnetic Tunnel Junctions with Embedded Nanoparticles.

Project description:The tunnel magnetoresistance (TMR) in the magnetic tunnel junction (MTJ) with embedded nanoparticles (NPs) was calculated in range of the quantum-ballistic model. The simulation was performed for electron tunneling through the insulating layer with embedded magnetic and non-magnetic NPs within the approach of the double barrier subsystem connected in parallel to the single barrier one. This model can be applied for both MTJs with in-plane magnetization and perpendicular one. We also calculated the in-plane component of the spin transfer torque (STT) versus the applied voltage in MTJs with magnetic NPs and determined that its value can be much larger than in single barrier system (SBS) for the same tunneling thickness. The reported simulation reproduces experimental data of the TMR suppression and peak-like TMR anomalies at low voltages available in leterature.

| S-EPMC4683539 | biostudies-literature

Shape anisotropy revisited in single-digit nanometer magnetic tunnel junctions.

Project description:Nanoscale magnetic tunnel junctions play a pivotal role in magnetoresistive random access memories. Successful implementation depends on a simultaneous achievement of low switching current for the magnetization switching by spin transfer torque and high thermal stability, along with a continuous reduction of junction size. Perpendicular easy-axis CoFeB/MgO stacks possessing interfacial anisotropy have paved the way down to 20-nm scale, below which a new approach needs to be explored. Here we show magnetic tunnel junctions that satisfy the requirements at ultrafine scale by revisiting shape anisotropy, which is a classical part of magnetic anisotropy but has not been fully utilized in the current perpendicular systems. Magnetization switching solely driven by current is achieved for junctions smaller than 10?nm where sufficient thermal stability is provided by shape anisotropy without adopting new material systems. This work is expected to push forward the development of magnetic tunnel junctions toward single-digit nm-scale nano-magnetics/spintronics.

| S-EPMC5813113 | biostudies-literature

Picosecond electric field pulse induced coherent magnetic switching in MgO/FePt/Pt(001)-based tunnel junctions: a multiscale study.

Project description:Combined methods of first-principles calculations and Landau-Lifshitz-Gilbert (LLG) macrospin simulations are performed to investigate the coherent magnetization switching in the MgO/FePt/Pt(001)-based magnetic tunnel junctions triggered by short pulses of electric field through the control of magnetic anisotropy energy (MAE) electrically. First-principles calculations indicate that the MAE of MgO/FePt/Pt(001) film varies linearly with the change of the electric field, whereas the LLG simulations show that the change in MAE by electric field pulses could induce the in-plane magnetization reversal of the free layer by tuning the pulse parameters. We find that there exist a critical pulse width τmin to switch the in-plane magnetization, and this τmin deceases with the increasing pulse amplitude E0. Besides, the magnetization orientation cannot be switched when the pulse width exceeds a critical value τmax, and τmax increases asymptotically with E0. In addition, there exist some irregular switching areas at short pulse width due to the high precessional frequency under small initial angle. Finally, a successive magnetization switching can be achieved by a series of electric field pulses.

| S-EPMC4027858 | biostudies-other

Microwave magnetic field modulation of spin torque oscillator based on perpendicular magnetic tunnel junctions.

Project description:Modulation of a microwave signal generated by the spin-torque oscillator (STO) based on a magnetic tunnel junction (MTJ) with perpendicularly magnetized free layer is investigated. Magnetic field inductive loop was created during MTJ fabrication process, which enables microwave field application during STO operation. The frequency modulation by the microwave magnetic field of up to 3 GHz is explored, showing a potential for application in high-data-rate communication technologies. Moreover, an inductive loop is used for self-synchronization of the STO signal, which after field-locking, exhibits significant improvement of the linewidth and oscillation power.

| S-EPMC6910944 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data