Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Spin memristive magnetic tunnel junctions with CoO-ZnO nano composite barrier.

ABSTRACT: The spin memristive devices combining memristance and tunneling magnetoresistance have promising applications in multibit nonvolatile data storage and artificial neuronal computing. However, it is a great challenge for simultaneous realization of large memristance and magnetoresistance in one nanoscale junction, because it is very hard to find a proper spacer layer which not only serves as good insulating layer for tunneling magnetoresistance but also easily switches between high and low resistance states under electrical field. Here we firstly propose to use nanon composite barrier layers of CoO-ZnO to fabricate the spin memristive Co/CoO-ZnO/Co magnetic tunnel junctions. The bipolar resistance switching ratio is high up to 90, and the TMR ratio of the high resistance state gets to 8% at room temperature, which leads to three resistance states. The bipolar resistance switching is explained by the metal-insulator transition of CoO(1-v) layer due to the migration of oxygen ions between CoO(1-v) and ZnO(1-v).

SUBMITTER: Li Q

PROVIDER: S-EPMC3899592 | biostudies-other | 2014

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Spin transfer torque driven higher-order propagating spin waves in nano-contact magnetic tunnel junctions.

Project description:Short wavelength exchange-dominated propagating spin waves will enable magnonic devices to operate at higher frequencies and higher data transmission rates. While giant magnetoresistance (GMR)-based magnetic nanocontacts are efficient injectors of propagating spin waves, the generated wavelengths are 2.6 times the nano-contact diameter, and the electrical signal strength remains too weak for applications. Here we demonstrate nano-contact-based spin wave generation in magnetic tunnel junctions and observe large-frequency steps consistent with the hitherto ignored possibility of second- and third-order propagating spin waves with wavelengths of 120 and 74 nm, i.e., much smaller than the 150-nm nanocontact. Mutual synchronization is also observed on all three propagating modes. These higher-order propagating spin waves will enable magnonic devices to operate at much higher frequencies and greatly increase their transmission rates and spin wave propagating lengths, both proportional to the much higher group velocity.

| S-EPMC6197248 | biostudies-literature

Magnetic coherent tunnel junctions with periodic grating barrier.

Project description:A new spintronic theory has been developed for the magnetic tunnel junction (MTJ) with single-crystal barrier. The barrier will be treated as a diffraction grating with intralayer periodicity, the diffracted waves of tunneling electrons thus contain strong coherence, both in charge and especially in spin. The theory can answer the two basic problems present in MgO-based MTJs: (1) Why does the tunneling magnetoresistance (TMR) oscillate with the barrier thickness? (2) Why is the TMR still far away from infinity when the two electrodes are both half-metallic? Other principal features of TMR can also be explained and reproduced by the present work. It also provides possible ways to modulate the oscillation of TMR, and to enhance TMR so that it can tend to infinity. Within the theory, the barrier, as a periodic diffraction grating, can get rid of the confinement in width, it can vary from nanoscale to microscale. Based on those results, a future-generation MTJ is proposed where the three pieces can be fabricated separately and then assembled together, it is especially appropriate for the layered materials, e.g., MoS2 and graphite, and most feasible for industries.

| S-EPMC4827029 | biostudies-other

Kondo Effect in Magnetic Tunnel Junctions with an AlOx Tunnel Barrier.

Project description:The influence of the magnetization configuration on Kondo effect in magnetic tunnel junction is investigated. In the parallel configuration, an additional resistance contribution (R*) below 40 K exhibits a logarithmic temperature dependence, indicating the presence of Kondo effect. However, in the anti-parallel configuration, the Kondo-effect-associated spin-flip scattering has a nontrivial contribution to the tunneling current, which compensates the reduction of the current directly caused by Kondo scattering, making R* disappear. These results indicate that suppression and restoration of Kondo effect can be experimentally achieved by altering the magnetization configuration, enhancing our understanding of the role of Kondo effect in spin-dependent transport.

| S-EPMC5497476 | biostudies-other

Anomalous Tunnel Magnetoresistance and Spin Transfer Torque in Magnetic Tunnel Junctions with Embedded Nanoparticles.

Project description:The tunnel magnetoresistance (TMR) in the magnetic tunnel junction (MTJ) with embedded nanoparticles (NPs) was calculated in range of the quantum-ballistic model. The simulation was performed for electron tunneling through the insulating layer with embedded magnetic and non-magnetic NPs within the approach of the double barrier subsystem connected in parallel to the single barrier one. This model can be applied for both MTJs with in-plane magnetization and perpendicular one. We also calculated the in-plane component of the spin transfer torque (STT) versus the applied voltage in MTJs with magnetic NPs and determined that its value can be much larger than in single barrier system (SBS) for the same tunneling thickness. The reported simulation reproduces experimental data of the TMR suppression and peak-like TMR anomalies at low voltages available in leterature.

| S-EPMC4683539 | biostudies-literature

Impact of Spin-Orbit Torque on Spin-Transfer Torque Switching in Magnetic Tunnel Junctions.

Project description:The paper presents our simulated results showing the substantial improvement of both switching speed and energy consumption in a perpendicular magnetic tunnel junction (p-MTJ), a core unit of Spin-Transfer-Torque Magnetic Random Access Memory (STT-MRAM), by the help of additional Spin-Orbit-Torque (SOT) write pulse current (WPSOT). An STT-SOT hybrid torque module for OOMMF simulation is implemented to investigate the switching behavior of a 20?nm cell in the p-MTJ. We found that the assistance of WPSOT to STT write pulse current (WPSTT) have a huge influence on the switching behavior of the free layer in the p-MTJ. For example, we could dramatically reduce the switching time (tSW) by 80% and thereby reduce the write energy over 70% as compared to those in the absence of the WPSOT. Even a very tiny amplitude of WPSOT (JSOT of the order of 102?A/m2) substantially assists to reduce the critical current density for switching of the free layer and thereby decreases the energy consumption as well. It is worth to be pointed out that the energy can be saved further by tuning the WPSOT parameters, i.e., amplitude and duration along at the threshold WPSTT. Our findings show that the proposed STT-SOT hybrid switching scheme has a great impact on the MRAM technology seeking the high speed and low energy consumption.

| S-EPMC7029010 | biostudies-literature

Microwave magnetic field modulation of spin torque oscillator based on perpendicular magnetic tunnel junctions.

Project description:Modulation of a microwave signal generated by the spin-torque oscillator (STO) based on a magnetic tunnel junction (MTJ) with perpendicularly magnetized free layer is investigated. Magnetic field inductive loop was created during MTJ fabrication process, which enables microwave field application during STO operation. The frequency modulation by the microwave magnetic field of up to 3 GHz is explored, showing a potential for application in high-data-rate communication technologies. Moreover, an inductive loop is used for self-synchronization of the STO signal, which after field-locking, exhibits significant improvement of the linewidth and oscillation power.

| S-EPMC6910944 | biostudies-literature

Spin-Torque Memristors Based on Perpendicular Magnetic Tunnel Junctions for Neuromorphic Computing.

Project description:Spin-torque memristors are proposed in 2009, and can provide fast, low-power, and infinite memristive behavior for neuromorphic computing and large-density non-volatile memory. However, the strict requirements of combining high magnetoresistance, stable domain wall pinning and current-induced switching in a single device pose difficulties in physical implementation. Here, a nanoscale spin-torque memristor based on a perpendicular-anisotropy magnetic tunnel junction with a CoFeB/W/CoFeB composite free layer structure is experimentally demonstrated. Its tunneling magnetoresistance is higher than 200%, and memristive behavior can be realized by spin-transfer torque switching. Memristive states are retained by strong domain wall pinning effects in the free layer. Experiments and simulations suggest that nanoscale vertical chiral spin textures can form around clusters of W atoms under the combined effect of opposite Dzyaloshinskii-Moriya interactions and the Ruderman-Kittel-Kasuya-Yosida interaction between the two CoFeB free layers. Energy fluctuation caused by these textures may be the main reason for the strong pinning effect. With the experimentally demonstrated memristive behavior and spike-timing-dependent plasticity, a spiking neural network to perform handwritten pattern recognition in an unsupervised manner is simulated. Due to advantages such as long endurance and high speed, the spin-torque memristors are competitive in the future applications for neuromorphic computing.

| S-EPMC8132064 | biostudies-literature

High Performance MgO-barrier Magnetic Tunnel Junctions for Flexible and Wearable Spintronic Applications.

Project description:The magnetic tunnel junction (MTJ) using MgO barrier is one of most important building blocks for spintronic devices and has been widely utilized as miniaturized magentic sensors. It could play an important role in wearable medical devices if they can be fabricated on flexible substrates. The required stringent fabrication processes to obtain high quality MgO-barrier MTJs, however, limit its integration with flexible electronics devices. In this work, we have developed a method to fabricate high-performance MgO-barrier MTJs directly onto ultrathin flexible silicon membrane with a thickness of 14 μm and then transfer-and-bond to plastic substrates. Remarkably, such flexible MTJs are fully functional, exhibiting a TMR ratio as high as 190% under bending radii as small as 5 mm. The devices' robustness is manifested by its retained excellent performance and unaltered TMR ratio after over 1000 bending cycles. The demonstrated flexible MgO-barrier MTJs opens the door to integrating high-performance spintronic devices in flexible and wearable electronics devices for a plethora of biomedical sensing applications.

| S-EPMC5288802 | biostudies-literature

A high-speed single sideband generator using a magnetic tunnel junction spin torque nano-oscillator.

Project description:An important property of spin-torque nano-oscillators (STNOs) is their ability to produce a frequency modulated (FM) signal, which is very critical for communication applications. We here demonstrate a novel single sideband (SSB) modulation phenomenon using a magnetic tunnel junction (MTJ)-based STNO, which saves transmission bandwidth and in principle should minimize attenuation for wireless communication. Experimentally, lower single sidebands (LSSBs) have been successfully demonstrated over a wide range of modulation frequency, f m = 150 MHz-1 GHz. The observed LSSBs are determined by the intrinsic properties of the device, which can be modeled well by a nonlinear frequency and amplitude modulation formulation and reproduced in macrospin simulations. Moreover, our macrospin simulation results show that the range of modulation current and modulation frequency for generating SSBs can be controlled by the field-like torque and biasing conditions.

| S-EPMC5647387 | biostudies-literature

Analog Approach to Constraint Satisfaction Enabled by Spin Orbit Torque Magnetic Tunnel Junctions.

Project description:Boolean satisfiability (k-SAT) is an NP-complete (k???3) problem that constitute one of the hardest classes of constraint satisfaction problems. In this work, we provide a proof of concept hardware based analog k-SAT solver, that is built using Magnetic Tunnel Junctions (MTJs). The inherent physics of MTJs, enhanced by device level modifications, is harnessed here to emulate the intricate dynamics of an analog satisfiability (SAT) solver. In the presence of thermal noise, the MTJ based system can successfully solve Boolean satisfiability problems. Most importantly, our results exhibit that, the proposed MTJ based hardware SAT solver is capable of finding a solution to a significant fraction (at least 85%) of hard 3-SAT problems, within a time that has a polynomial relationship with the number of variables(<50).

| S-EPMC5932068 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data