Highly Sensitive and Selective In-Situ SERS Detection of Pb(2+), Hg(2+), and Cd(2+) Using Nanoporous Membrane Functionalized with CNTs.
Ontology highlight
ABSTRACT:
SUBMITTER: Shaban M
PROVIDER: S-EPMC4855155 | biostudies-other | 2016 May
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Exposure to lead (Pb), cadmium (Cd), and mercury (Hg) has been reported to be associated with liver-related diseases. However, studies examining the association between heavy metal exposure and liver injury in a large population are scant and characterized by inconsistent results. This study aimed to evaluate the association between levels of heavy metal exposure and liver injury in the general population. Data for 2953 participants aged 19 years or more obtained from the Korean National Environmental Health Survey (KoNEHS) Cycle 3 (2015-2017) were used. The associations between levels of blood or urine heavy metals (Pb, Cd, and Hg) and liver function biomarkers [aspartate aminotransferase (AST), alanine aminotransferase (ALT), and gamma-glutamyl transferase (GGT)] were evaluated using multiple linear regression analysis. Regarding the blood Pb (BPb), AST was higher in those of the 4th quartile, ALT was higher in those of the 2nd and 4th quartiles, and GGT was higher in those of the 3rd and 4th quartiles than in the 1st quartile. For urinary Cd (UCd), AST was higher in those of the 4th quartile; ALT was higher in those of the 2nd, 3rd, and 4th quartiles; and GGT was higher in the 4th quartile than in the 1st quartile. For the blood Hg (BHg), AST was higher in those of the 2nd and 4th quartile, ALT was higher in those of the 2nd, 3rd, and 4th quartiles; and GGT was higher in those of the 3rd and 4th quartiles than in the 1st quartile. There was no significant difference between urinary Hg (UHg) and liver function markers. Heavy metal exposure showed an association with liver injury among the general adult population in Korea. Further studies are required to clarify the relationship between heavy metals and liver injury.
| S-EPMC8297092 | biostudies-literature
Project description:A piezoresistive sensor is an essential component of wearable electronics that can detect resistance changes when pressure is applied. In general, microstructures of sensing layers have been adopted as an effective approach to enhance piezoresistive performance. However, the mold-casted microstructures typically have quite a thick layer with dozens of microscales. In this paper, a carbon microstructure is formed by blue laser annealing (BLA) on a carbon nanotube (CNT) layer, which changes the surface morphology of CNTs into carbonaceous protrusions and increases its thickness more than four times compared to the as-deposited layer. Then, the pressure sensor is fabricated using a spin-coating of styrene-ethylene-butylene-styrene (SEBS) elastomer on the BLA CNTs layer. A 1.32 µm-thick pressure sensor exhibits a high sensitivity of 6.87 × 105 kPa-1, a wide sensing range of 278 Pa~40 kPa and a fast response/recovery time of 20 ms, respectively. The stability of the pressure sensor is demonstrated by the repeated loading and unloading of 20 kPa for 4000 cycles. The stretchable pressure sensor was also demonstrated using lateral CNT electrodes on SEBS surface, exhibiting stable pressure performance, with up to 20% stretching.
| S-EPMC9268723 | biostudies-literature
Project description:The promise of graphene and its derivatives as next generation sensors for real-time detection of toxic heavy metals (HM) requires a clear understanding of behavior of these metals on the graphene surface and response of the graphene to adsorption events. Our calculations herein were focused on the investigation of the interaction between three HMs, namely Cd, Hg and Pb, with graphene quantum dots (GQDs). We determine binding energies and heights of both neutral and charged HM ions on these GQDs. The results show that the adsorption energy of donor-like physisorbed neutral Pb atoms is larger than that of either Cd or Hg. In contrast to the donor-like behavior of elemental HMs, the chemisorbed charged HM species act as typical acceptors. The energy barriers to migration of the neutral adatoms on GQDs are also estimated. In addition, we show how the substitution of a carbon atom by a HM adatom changes the geometric structure of GQDs and hence their electronic and vibrational properties. UV-visible absorption spectra of HM-adsorbed GQDs vary with the size and shape of the GQD. Based on our results, we suggest a route towards the development of a graphene-based sensing platform for the optical detection of toxic HMs.
| S-EPMC5479795 | biostudies-literature
Project description:A novel chelating adsorbent, based on the functionalization of activated carbon (AC) derived from water hyacinth (WH) with melamine thiourea (MT) to form melamine thiourea-modified activated carbon (MT-MAC), is used for the effective removal of Hg2+, Pb2+, and Cd2+ from aqueous solution. Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) theory confirm the successful functionalization of AC with the melamine thiourea chelating ligand through the amidation reaction between the carboxyl groups of oxidized activated carbon (OAC) and the amino groups of melamine thiourea (MT) in the presence of dicyclohexylcarbodiimide (DCC) as a coupling agent. The prepared MT-MAC exhibited extensive potential for the adsorption of the toxic metal ions Hg2+, Pb2+, and Cd2+ from wastewater. The MT-MAC showed high capacities for the adsorption of Hg2+ (292.6 mg·g-1), Pb2+ (237.4 mg·g-1), and Cd2+ (97.9 mg·g-1) from aqueous solution. Additionally, 100% removal efficiency of Hg2+ at pH 5.5 was observed at very low initial concentrations (25-1000 ppb).The experimental sorption data could be fitted well with the Langmuir isotherm model, suggesting a monolayer adsorption behavior. The kinetic data of the chemisorption mechanism realized by the melamine thiourea groups grafted onto the activated carbon surface have a perfect match with the pseudo-second-order (PSO) kinetic model. In a mixed solution of metal ions containing 50 ppm of each ion, MT-MAC showed a removal of 97.0% Hg2+, 68% Pb2+, 45.0% Cd2+, 17.0% Cu2+, 7.0% Ni2+, and 5.0% Zn2+. Consequently, MT-MAC has exceptional selectivity for Hg2+ ions from the mixed metal ion solutions. The MT-MAC adsorbent showed high stability even after three adsorption-desorption cycles. According to the results obtained, the use of the MT-MAC adsorbent for the adsorption of Pb2+, Hg2+, and Cd2+ metal ions from polluted water is promising.
| S-EPMC8867800 | biostudies-literature
Project description:This paper reports a highly sensitive and selective surface-enhanced Raman spectroscopy (SERS) sensing platform. We used a simple fabrication method to generate plasmonic hotspots through a direct maskless plasma etching of a polymer surface and the surface tension-driven assembly of high aspect ratio Ag/polymer nanopillars. These collapsed plasmonic nanopillars produced an enhanced near-field interaction via coupled localized surface plasmon resonance. The high density of the small nanogaps yielded a high plasmonic detection performance, with an average SERS enhancement factor of 1.5 × 107. More importantly, we demonstrated that the encapsulation of plasmonic nanostructures within nanofiltration membranes allowed the selective filtration of small molecules based on the degree of membrane swelling in organic solvents and molecular size. Nanofiltration membrane-encapsulated SERS substrates do not require pretreatments. Therefore, they provide a simple and fast detection of toxic molecules using portable Raman spectroscopy.
| S-EPMC6523801 | biostudies-literature
Project description:Highly sensitive and rapid technology of surface enhanced Raman scattering (SERS) was applied to create aptasensors for influenza virus detection. SERS achieves 106-109 times signal amplification, yielding excellent sensitivity, whereas aptamers to hemagglutinin provide a specific recognition of the influenza virus. Aptamer RHA0385 was demonstrated to have essentially broad strain-specificity toward both recombinant hemagglutinins and the whole viruses. To achieve high sensitivity, a sandwich of primary aptamers, influenza virus and secondary aptamers was assembled. Primary aptamers were attached to metal particles of a SERS substrate, and influenza viruses were captured and bound with secondary aptamers labelled with Raman-active molecules. The signal was affected by the concentration of both primary and secondary aptamers. The limit of detection was as low as 1 · 10-4 hemagglutination units per probe as tested for the H3N2 virus (A/England/42/72). Aptamer-based sensors provided recognition of various influenza viral strains, including H1, H3, and H5 hemagglutinin subtypes. Therefore, the aptasensors could be applied for fast and low-cost strain-independent determination of influenza viruses.
| S-EPMC6483365 | biostudies-literature
Project description:The rapid sampling and efficient collection of target molecules from a real-world surface is fairly crucial for surface-enhanced Raman scattering (SERS) to detect trace pesticide residues in the environment and in agriculture fields. In this work, a versatile approach was exploited to fabricate a flexible SERS substrate for highly sensitive detection of carbaryl pesticides, using in-situ grown silver nanoparticles (AgNPs)on non-woven (NW) fabric surfaces based on mussel-inspired polydopamine (PDA) molecules. The obtained NW@PDA@AgNPs fabrics showed extremely sensitive and reproducible SERS signals toward crystal violet (CV) molecules, and the detection limit was as low as 1.0 × 10-12 M. More importantly, these NW@PDA@AgNPs fabrics could be directly utilized as flexible SERS substrates for the rapid extraction and detection of trace carbaryl pesticides from various fruit surfaces through a simple swabbing approach. It was identified that the detection limits of carbaryl residues from apple, orange, and banana surfaces were approximately decreased to 4.02 × 10-12, 6.04 × 10-12, and 5.03 × 10-12 g, respectively, demonstrating high sensitivity and superior reliability. These flexible substrates could not only drastically increase the collection efficiency from multifarious irregular-shaped matrices, but also greatly enhance analytical sensitivity and reliability for carbaryl pesticides. The fabricated flexible and multifunctional SERS substrates would have great potential to trace pesticide residue detection in the environment and bioscience fields.
| S-EPMC6473996 | biostudies-literature
Project description:In-situ remediation of heavy-metal-contaminated soil in farmland using phytostabilization combined with soil amendments is a low-cost and effective technology for soil pollution remediation. In this study, coconut shell biochar (CB, 0.1% and 0.5%), organic fertilizer (OF, 3.0%), and Fe-Si-Ca material (IS, 3.0%) were used to enhance the phytostabilization effect of ramie (Boehmeria nivea L.) on Cd and Pb in highly polluted soils collected at Dabaoshan (DB) and Yangshuo (YS) mine sites. Results showed that simultaneous application of CB, OF, and IS amendments (0.1% CB + 3.0% OF + 3.0% IS and 0.5% CB + 3.0% OF + 3.0% IS, DB-T5 and DB-T6) could significantly increase soil pH, reduce the concentrations of CaCl2-extractable Cd and Pb, and increase the contents of Ca, P, S, and Si in DB soil. Under these two treatments, the growth of ramie was significantly improved, its photosynthesis was enhanced, and its levels of Cd and Pb were reduced, in comparison with the control (DB-CK). After applying DB-T5 and DB-T6, the concentrations of Cd and Pb in roots were decreased by 97.7-100% and 64.6-77.9%, while in shoots they were decreased by up to 100% and 92.9-100%, respectively. In YS-T4 (0.5% CB + 3.0% OF), the concentrations of Cd and Pb in roots were decreased by 39.5% and 46.0%, and in shoots they were decreased by 44.7% and 88.3%. We posit that phytostabilization using ramie and amendments could reduce the Cd and Pb bioavailability in the soil mainly through rhizosphere immobilization and plant absorption. In summary, this study suggests that the use of tolerant plant ramie and simultaneous application of coconut shell biochar, organic fertilizer, and Fe-Si-Ca materials is an effective stabilization strategy that can reduce Cd and Pb availabilities in soil. Ultimately, this strategy may reduce the exposure risk of crops to heavy metal pollution in farmland.
| S-EPMC7084681 | biostudies-literature
Project description:We improved our inductively coupled plasma mass spectrometry (ICP-MS) whole blood method [1] for determination of lead (Pb), cadmium (Cd), and mercury (Hg) by including manganese (Mn) and selenium (Se), and expanding the calibration range of all analytes. The method is validated on a PerkinElmer (PE) ELAN® DRC II ICP-MS (ICP-DRC-MS) and uses the Dynamic Reaction Cell (DRC) technology to attenuate interfering background ion signals via ion-molecule reactions. Methane gas (CH4) eliminates background signal from 40Ar2+ to permit determination of 80Se+, and oxygen gas (O2) eliminates several polyatomic interferences (e.g. 40Ar15N+, 54Fe1H+) on 55Mn+. Hg sensitivity in DRC mode is a factor of two higher than vented mode when measured under the same DRC conditions as Mn due to collisional focusing of the ion beam. To compensate for the expanded method's longer analysis time (due to DRC mode pause delays), we implemented an SC4-FAST autosampler (ESI Scientific, Omaha, NE), which vacuum loads the sample onto a loop, to keep the sample-to-sample measurement time to less than 5min, allowing for preparation and analysis of 60 samples in an 8-h work shift. The longer analysis time also resulted in faster breakdown of the hydrocarbon oil in the interface roughing pump. The replacement of the standard roughing pump with a pump using a fluorinated lubricant, Fomblin®, extended the time between pump maintenance. We optimized the diluent and rinse solution components to reduce carryover from high concentration samples and prevent the formation of precipitates. We performed a robust calculation to determine the following limits of detection (LOD) in whole blood: 0.07µgdL-1 for Pb, 0.10µgL-1 for Cd, 0.28?gL-1 for Hg, 0.99µgL-1 for Mn, and 24.5µgL-1 for Se.
| S-EPMC5123815 | biostudies-literature
Project description:We report that antibodies can be spontaneously loaded in functionalized mesoporous silica (FMS) with superhigh density (0.4-0.8 mg of antibody/mg of FMS) due to their comprehensive noncovalent interaction. The superhigh loading density and noncovalent interaction between FMS and antibodies allow long-lasting local release of the immunoregulatory molecules from FMS under physiological conditions. Preliminary data indicate that FMS-anti-CTLA4 antibody injected directly into a mouse melanoma induces much greater and extended inhibition of tumor growth than the antibody given systemically. Our findings open up a novel approach for local delivery of therapeutically active proteins to tumors and, potentially, other diseases.
| S-EPMC2874126 | biostudies-literature