Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

One-pot conversion of disaccharide into 5-hydroxymethylfurfural catalyzed by imidazole ionic liquid.

ABSTRACT: Conversion of carbohydrate into 5-hydroxymethylfurfural (5- HMF), a versatile, key renewable platform compound is regarded as an important transformation in biomass-derived carbohydrate chemistry. A variety of ILs, not only acidic but also alkaline ILs, were synthesized and used as catalyst in the production of 5-HMF from disaccharide. Several factors including reaction temperature, IL dosage, solvent and reaction time,were found to influence the yield of 5-HMF from cellobiose. Of the ILs tested, hydroxy-functionalized ionic liquid (IL), 1-hydroxyethyl-3-methylimidazolium tetrafluoroborate ([AEMIM]BF4) showed the highest catalytic activity and selectivity. 5-HMF yield of 68.71% from sucrose was obtained after 6 hrs at 160 °C. At the same condition with cellobiose as substrate, 5-HMF yield was 24.73%. In addition, 5-HMF also exhibited good stablity in this reaction system. Moreover, a kinetic analysis was carried out in both acidic and alkaline IL-catalyzed system, suggesting main side reaction in the conversion of fructose catalyzed by acidic and alkaline IL was polymerization of fructose and 5-HMF degradation, respectively.

SUBMITTER: Qu Y

PROVIDER: S-EPMC4867639 | biostudies-other | 2016 May

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

One-Pot Deconstruction and Conversion of Lignocellulose Into Reducing Sugars by Pyridinium-Based Ionic Liquid-Metal Salt System.

Project description:Constantly decreasing fossil resources and exceeding energy demands are the most alarming concerns nowadays. The only way out is to develop efficient, safe, and economical biomass processing protocols that can lead toward biofuels and fine chemicals. This research is one of such consequences involving the deconstruction and conversion of wheat straw carbohydrate constituents into reducing sugars via one-pot reaction promoted by Lewis acidic pyridinium-based ionic liquids (PyILs) mixed with different metal salts (MCl). Various parameters such as the type of metal salt, loading amount of metal salt, time, temperature, particle size of biomass, and water content which affect the deconstruction of wheat straw have been evaluated and optimized. Among the studied ionic liquid (IL) and metal salt systems, the best results were obtained with [BMPy]+ CoCl3- . The dinitrosalicylic acid (DNS) assay was used to determine the percentage of total reducing sugars (TRS) generated during treatment of wheat straw. The deconstructed wheat straw was characterized with various analytical tools, that is, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and X-ray powder diffraction (XRD) analyses. The IL-metal salt system was recycled for subsequent treatment of wheat straw. Statistical parameters were calculated from analysis of variance (ANOVA) at the 0.05 level of confidence.

| S-EPMC7174784 | biostudies-literature

One-Pot Ionic Liquid-Mediated Bioprocess for Pretreatment and Enzymatic Hydrolysis of Rice Straw with Ionic Liquid-Tolerance Bacterial Cellulase.

Project description:Ionic liquid (IL) pretreatment of lignocellulose is an efficient method for the enhancement of enzymatic saccharification. However, the remaining residues of ILs deactivate cellulase, therefore making intensive biomass washing after pretreatment necessary. This study aimed to develop the one-pot process combining IL pretreatment and enzymatic saccharification by using low-toxic choline acetate ([Ch][OAc]) and IL-tolerant bacterial cellulases. Crude cellulases produced from saline soil inhabited Bacillus sp. CBD2 and Brevibacillus sp. CBD3 were tested under the influence of 0.5-2.0 M [Ch][OAc], which showed that their activities retained at more than 95%. However, [Ch][OAc] had toxicity to CBD2 and CBD3 cultures, in which only 32.85% and 12.88% were alive at 0.5 M [Ch][OAc]. Based on the specific enzyme activities, the sugar amounts produced from one-pot processes using 1 mg of CBD2 and CBD3 were higher than that of Celluclast 1.5 L by 2.0 and 4.5 times, respectively, suggesting their potential for further application in the biorefining process of value-added products.

| S-EPMC8772859 | biostudies-literature

One-Pot Conversion of Allylic Alcohols to ?-Methyl Ketones via Iron-Catalyzed Isomerization-Methylation.

Project description:A one-pot iron-catalyzed conversion of allylic alcohols to ?-methyl ketones has been developed. This isomerization-methylation strategy utilized a (cyclopentadienone)iron(0) carbonyl complex as precatalyst and methanol as the C1 source. A diverse range of allylic alcohols undergoes isomerization-methylation to form ?-methyl ketones in good isolated yields (up to 84% isolated yield).

| S-EPMC7007281 | biostudies-literature

One-pot phosphine-catalyzed syntheses of quinolines.

Project description:In this study we developed an efficient one-pot procedure for the preparation of 3-substituted and 3,4-disubstituted quinolines from stable starting materials (activated acetylenes reacting with o-tosylamidobenzaldehydes and o-tosylamidophenones, respectively) under mild conditions. The reaction appears to operate under a general base catalysis mechanism, instigated by the ?-phosphonium enoate ?-vinyl anion generated in situ through nucleophilic addition of PPh(3) to the activated alkyne. Michael addition of the deprotonated tosylamides to the activated alkynes and subsequent rapid aldol cyclization led to the formation of labile N-tosyldihydroquinoline intermediates. Driven by aromatization, detosylation of the dihydroquinoline intermediates occurred readily in the presence of dilute aqueous HCl to give the final quinoline products.

| S-EPMC3459651 | biostudies-literature

One-Pot Synthesis of PtNi Alloy Nanoparticle-Supported Multiwalled Carbon Nanotubes in an Ionic Liquid Using a Staircase Heating Process.

Project description:High-performance PtNi alloy nanoparticle-supported multiwalled carbon nanotube composite (PtNi/MWCNT) electrocatalysts can be prepared via one-pot preparation for oxygen reduction reaction. This route of preparation utilizes the pyrolytic decomposition of metal precursors, such as Pt(acac)2 with Ni precursors, nickel bis(trifluoromethanesulfonyl)amide (Ni[Tf2N]2) or nickel acetylacetonate (Ni(acac)2), in an ionic liquid (IL), N,N,N-trimethyl-N-propylammonium bis(trifluoromethanesulfonyl)amide ([N1,1,1,3][Tf2N]). Currently, there is insufficient information concerning the effect of difference in preparation conditions on the formation mechanism and catalytic activity of PtNi/MWCNT. In this article, a staircase heating process was used to investigate the PtNi alloy nanoparticle formation mechanism and catalytic activity of the resulting PtNi/MWCNT. We found that the alloy formation process, composition, and crystal structure, which directly affect the electrocatalytic activity, strongly depended on the Ni precursor species and heating process. The catalytic performance of certain PtNi/MWCNTs collected during the staircase heating process was better than that of PtNi/MWCNTs produced via the conventional heating process.

| S-EPMC7557222 | biostudies-literature

Simple one-pot conversion of aldehydes and ketones to enals.

Project description:A simple and efficient method to convert aldehydes into alpha,beta-unsaturated aldehydes with a two-carbon homologation is presented. Hydroboration of ethoxy acetylene with BH(3).SMe(2) generates tris(ethoxyvinyl) borane. Transmetalation with diethylzinc, addition to aldehydes or ketones, and acidic workup affords enals. When the addition is quenched with anilinium hydrochloride, 1,2-dithioglycol, or acetic anhydride, the unsaturated imine, dithiolane, or 1,1-diacetate is isolated in high yield. These transformations can be performed in a one-pot procedure.

| S-EPMC2731546 | biostudies-literature

The Role Ionic Liquid [BMIM][PF<sub>6</sub>] in One-Pot Synthesis of Tetrahydropyran Rings through Tandem Barbier-Prins Reaction.

Project description:Tetrahydropyran (THP) rings are common in several natural products, therefore, various strategies are being developed to synthesize these rings. The present work described the study of a one-pot synthesis of 2,4,6-trisubstituted tetrahydropyran compounds promoted by the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF6] through a Barbier-Prins reaction between allyl bromide and aldehydes. The use of [BMIM][PF6] gave Prins products from several aldehydes in good yields and reaction times. We also found that the anion, PF6-, accelerates the Barbier reaction when used alone, and the excess SnBr2 from the reaction conditions of the Barbier reaction leads to the formation of the THP rings, thus acting as a catalyst for Prins cyclization. Additionally, we demonstrate that ionic liquid can be recovered and reused five times in the preparation of 4-bromo-tetrahydro-2,6-diphenyl-2H-pyran without significant yield loss.

| S-EPMC6600659 | biostudies-literature

One-Pot Synthesis of Dimethyl Carbonate over a Binary Catalyst of an Ionic Liquid and an Alkali Carbonate under Low Pressure.

Project description:A mild and highly efficient approach has been developed for the one-pot synthesis of dimethyl carbonate (DMC) from epoxide, carbon dioxide, and methanol under low initial pressure. The key to the successful transformation is the use of a bicomponent catalytic system composed of a hydroxyl-functionalized ionic liquid and an alkali carbonate. This bicomponent catalytic system demonstrated excellent reusability in four runs. Under the optimal reaction conditions, a 64% yield of DMC from propylene oxide and an 81% yield of DMC from ethylene oxide were obtained.

| S-EPMC8173548 | biostudies-literature

Cobalt(II) chloride catalyzed one-pot synthesis of alpha-aminonitriles.

Project description:A simple and efficient method has been developed for the synthesis of alpha-aminonitriles by a one-pot three- component condensation of aldehydes, amines, and potassium cyanide in acetonitrile in the presence of a catalytic amount of CoCl2 at room temperature.

| S-EPMC1399456 | biostudies-literature

Liquid Phase Peptide Synthesis via One-Pot Nanostar Sieving (PEPSTAR).

Project description:Herein, a one-pot liquid phase peptide synthesis featuring iterative addition of amino acids to a "nanostar" support, with organic solvent nanofiltration (OSN) for isolation of the growing peptide after each synthesis cycle is reported. A cycle consists of coupling, Fmoc removal, then sieving out of the reaction by-products via nanofiltration in a reactor-separator, or synthesizer apparatus where no phase or material transfers are required between cycles. The three-armed and monodisperse nanostar facilitates both efficient nanofiltration and real-time reaction monitoring of each process cycle. This enabled the synthesis of peptides more efficiently while retaining the full benefits of liquid phase synthesis. PEPSTAR was validated initially with the synthesis of enkephalin-like model penta- and decapeptides, then octreotate amide and finally octreotate. The crude purities compared favorably to vendor produced samples from solid phase synthesis.

| S-EPMC8049079 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data