A method of undifferenced ambiguity resolution for GPS+GLONASS precise point positioning.
Ontology highlight
ABSTRACT:
SUBMITTER: Yi W
PROVIDER: S-EPMC4879584 | biostudies-other | 2016
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Although precise point positioning (PPP) is a well-established and promising technique with the use of precise satellite orbit and clock products, it costs a long convergence time to reach a centimeter-level positioning accuracy. The PPP with ambiguity resolution (PPP-AR) technique can improve convergence performance by resolving ambiguities after separating the fractional cycle bias (FCB). Now the FCB estimation is mainly realized by the regional or global operating reference station network. However, it does not work well in the areas where network resources are scarce. The contribution of this paper is to realize an ambiguity residual constraint-based PPP with partial ambiguity resolution (PPP-PARC) under no real-time network corrections to speed up the convergence, especially when the performance of the float solution is poor. More specifically, the update strategy of FCB estimation in a stand-alone receiver is proposed to realize the PPP-PAR. Thereafter, the solving process of FCB in a stand-alone receiver is summarized. Meanwhile, the influencing factors of the ambiguity success rate in the PPP-PAR without network corrections are analyzed. Meanwhile, the ambiguity residual constraint is added to adapt the particularity of the partial ambiguity-fixing without network corrections. Moreover, the positioning experiments with raw observation data at the Global Positioning System (GPS) globally distributed reference stations are conducted to determine the ambiguity residual threshold for post-processing and real-time scenarios. Finally, the positioning performance was verified by 22 GPS reference stations. The results show that convergence time is reduced by 15.8% and 26.4% in post-processing and real-time scenarios, respectively, when the float solution is unstable, compared with PPP using a float solution. However, if the float solution is stable, the PPP-PARC method has performance similar to the float solution. The method shows the significance of the PPP-PARC for future PPP applications in areas where network resource is deficient.
| S-EPMC7309117 | biostudies-literature
Project description:The real-time estimation of the wide-lane and narrow-lane Uncalibrated Phase Delay (UPD) of satellites is realized by real-time data received from regional reference station networks; The properties of the real-time UPD product and its influence on real-time precise point positioning ambiguity resolution (RTPPP-AR) are experimentally analyzed according to real-time data obtained from the regional Continuously Operating Reference Stations (CORS) network located in Tianjin, Shanghai, Hong Kong, etc. The results show that the real-time wide-lane and narrow-lane UPD products differ significantly from each other in time-domain characteristics; the wide-lane UPDs have daily stability, with a change rate of less than 0.1 cycle/day, while the narrow-lane UPDs have short-term stability, with significant change in one day. The UPD products generated by different regional networks have obvious spatial characteristics, thus significantly influencing RTPPP-AR: the adoption of real-time UPD products employing the sparse stations in the regional network for estimation is favorable for improving the regional RTPPP-AR up to 99%; the real-time UPD products of different regional networks slightly influence PPP-AR positioning accuracy. After ambiguities are successfully fixed, the real-time dynamic RTPPP-AR positioning accuracy is better than 3 cm in the plane and 8 cm in the upward direction.
| S-EPMC5470908 | biostudies-other
Project description:Multi- system and multi-frequency are two key factors that determine the performance of precise point positioning. Both multi-frequency and multi-system lead to new biases, which are not solved systematically. This paper concentrates on mathematical models of biases, influences of these biases, and positioning performance analysis of different observation models. The biases comprise the inter-frequency clock bias in multi-frequency and the inter-system clock bias in multi-system. The former is the residual differential code biases (DCBs) from receiver clock and satellite clock and usually occurs at the third frequency, the latter is the deviation of the receiver clock errors in different systems. Unified mathematical models of the biases are presented by analyzing the general formula of observation equations. The influences of these biases are validated by experiments with corresponding observation models. Subsequently, the experiments, which are based on the data at five globally distributed stations in Multi-Global Navigation Satellite System (GNSS) Experiment (MGEX) on day of year 100, 2018, assess positioning performance of different observation models with combination of frequencies (dual-frequency or triple- frequency) and systems (BeiDou Navigation Satellite System (BDS) or Global Positioning System (GPS)). The results show that the performances of triple-frequency models are almost as the same level as the dual-frequency models. They provide scientific support for the triple-frequency ambiguity-fixed solution which has a better convergence characteristic than dual-frequency ambiguity-fixed solution. Furthermore, the biases are expressed as an unified form that gives an important and valuable reference for future research on multi-frequency and multi-system precise point positioning.
| S-EPMC6603533 | biostudies-literature
Project description:The world of satellite navigation is undergoing dramatic changes with the rapid development of multi-constellation Global Navigation Satellite Systems (GNSSs). At the moment more than 70 satellites are already in view, and about 120 satellites will be available once all four systems (BeiDou + Galileo + GLONASS + GPS) are fully deployed in the next few years. This will bring great opportunities and challenges for both scientific and engineering applications. In this paper we develop a four-system positioning model to make full use of all available observations from different GNSSs. The significant improvement of satellite visibility, spatial geometry, dilution of precision, convergence, accuracy, continuity and reliability that a combining utilization of multi-GNSS brings to precise positioning are carefully analyzed and evaluated, especially in constrained environments.
| S-EPMC4321187 | biostudies-other
Project description:Because the traditional Cholesky decomposition algorithm still has some problems such as computational complexity and scattered structure among matrices when solving the GNSS ambiguity, it is the key problem to further improve the computational efficiency of the least squares ambiguity reduction correlation process in the carrier phase integer ambiguity solution. But the traditional matrix decomposition calculation is more complex and time-consuming, to improve the efficiency of the matrix decomposition, in this paper, the decomposition process of traditional matrix elements is divided into two steps: multiplication update and column reduction of square root calculation. The column reduction step is used to perform square root calculation and column division calculation, while the update step is used for the update task of multiplication. Based on the above ideas, the existing Cholesky decomposition algorithm is improved, and a column oriented Cholesky (C-Cholesky) algorithm is proposed to further improve the efficiency of matrix decomposition, so as to shorten the calculation time of integer ambiguity reduction correlation. The results show that this method is effective and superior, and can improve the data processing efficiency by about 12.34% on average without changing the integer ambiguity accuracy of the traditional Cholesky algorithm.
| S-EPMC10023790 | biostudies-literature
Project description:Accurate navigation is crucial in the construction of intelligent orchards, and the need for vehicle navigation accuracy becomes even more important as production is refined. However, traditional navigation methods based on global navigation satellite system (GNSS) and 2D light detection and ranging (LiDAR) can be unreliable in complex scenarios with little sensory information due to tree canopy occlusion. To solve these issues, this paper proposes a 3D LiDAR-based navigation method for trellis orchards. With the use of 3D LiDAR with a 3D simultaneous localization and mapping (SLAM) algorithm, orchard point cloud information is collected and filtered using the Point Cloud Library (PCL) to extract trellis point clouds as matching targets. In terms of positioning, the real-time position is determined through a reliable method of fusing multiple sensors for positioning, which involves transforming the real-time kinematics (RTK) information into the initial position and doing a normal distribution transformation between the current frame point cloud and the scaffold reference point cloud to match the point cloud position. For path planning, the required vector map is manually planned in the orchard point cloud to specify the path of the roadway, and finally, navigation is achieved through pure path tracking. Field tests have shown that the accuracy of the normal distributions transform (NDT) SLAM method can reach 5 cm in each rank with a coefficient of variation that is less than 2%. Additionally, the navigation system has a high positioning heading accuracy with a deviation within 1° and a standard deviation of less than 0.6° when moving along the path point cloud at a speed of 1.0 m/s in a Y-trellis pear orchard. The lateral positioning deviation was also controlled within 5 cm with a standard deviation of less than 2 cm. This navigation system has a high level of accuracy and can be customized to specific tasks, making it widely applicable in trellis orchards with autonomous navigation pesticide sprayers.
| S-EPMC10330707 | biostudies-literature
Project description:Three-dimensional (3D) bioprinting is an appealing approach for building tissues; however, bioprinting of mini-tissue blocks (i.e., spheroids) with precise control on their positioning in 3D space has been a major obstacle. Here, we unveil "aspiration-assisted bioprinting (AAB)," which enables picking and bioprinting biologics in 3D through harnessing the power of aspiration forces, and when coupled with microvalve bioprinting, it facilitated different biofabrication schemes including scaffold-based or scaffold-free bioprinting at an unprecedented placement precision, ~11% with respect to the spheroid size. We studied the underlying physical mechanism of AAB to understand interactions between aspirated viscoelastic spheroids and physical governing forces during aspiration and bioprinting. We bioprinted a wide range of biologics with dimensions in an order-of-magnitude range including tissue spheroids (80 to 600 μm), tissue strands (~800 μm), or single cells (electrocytes, ~400 μm), and as applications, we illustrated the patterning of angiogenic sprouting spheroids and self-assembly of osteogenic spheroids.
| S-EPMC7060055 | biostudies-literature
Project description:Regulation of chromatin structure is essential for controlling access of DNA to factors that require association with specific DNA sequences. Here we describe the development and validation of engineered chromatin remodeling proteins (E-ChRPs) for inducing programmable changes in nucleosome positioning by design. We demonstrate that E-ChRPs function both in vitro and in vivo to specifically reposition target nucleosomes and entire nucleosomal arrays. We show that induced, systematic positioning of nucleosomes over yeast Ume6 binding sites leads to Ume6 exclusion, hyperacetylation, and transcriptional induction at target genes. We also show that programmed global loss of nucleosome-free regions at Reb1 targets is generally inhibitory with mildly repressive transcriptional effects. E-ChRPs are compatible with multiple targeting modalities, including the SpyCatcher and dCas9 moieties, resulting in high versatility and enabling diverse future applications. Thus, engineered chromatin remodeling proteins represent a simple and robust means to probe and disrupt DNA-dependent processes in different chromatin contexts.
| S-EPMC6884087 | biostudies-literature
Project description:In the current event-related potential (ERP) study, we investigated how speech rhythm impacts speech segmentation and facilitates the resolution of syntactic ambiguities in auditory sentence processing. Participants listened to syntactically ambiguous German subject- and object-first sentences that were spoken with either regular or irregular speech rhythm. Rhythmicity was established by a constant metric pattern of three unstressed syllables between two stressed ones that created rhythmic groups of constant size. Accuracy rates in a comprehension task revealed that participants understood rhythmically regular sentences better than rhythmically irregular ones. Furthermore, the mean amplitude of the P600 component was reduced in response to object-first sentences only when embedded in rhythmically regular but not rhythmically irregular context. This P600 reduction indicates facilitated processing of sentence structure possibly due to a decrease in processing costs for the less-preferred structure (object-first). Our data suggest an early and continuous use of rhythm by the syntactic parser and support language processing models assuming an interactive and incremental use of linguistic information during language processing.
| S-EPMC3568096 | biostudies-literature
Project description:Binocular vision uses the parallax principle of the human eye to obtain 3D information of an object, which is widely used as an important means of acquiring 3D information for 3D reconstruction tasks. To improve the accuracy and efficiency of 3D reconstruction, we propose a 3D reconstruction method that combines second-order semiglobal matching, guided filtering and Delaunay triangulation. First, the existing second-order semiglobal matching method is improved, and the smoothness constraint of multiple angle directions is added to the matching cost to generate a more robust disparity map. Second, the 3D coordinates of all points are calculated by combining camera parameters and disparity maps to obtain the 3D point cloud, which is smoothed by guided filtering to remove noise points and retain details. Finally, a method to quickly locate the insertion point and accelerate Delaunay triangulation is proposed. The surface of the point cloud is reconstructed by Delaunay triangulation based on fast point positioning to improve the visibility of the 3D model. The proposed approach was evaluated using the Middlebury and KITTI datasets. The experimental results show that the proposed second-order semiglobal matching method has higher accuracy than other stereo matching methods and that the proposed Delaunay triangulation method based on fast point location requires less time than the original Delaunay triangulation.
| S-EPMC8789135 | biostudies-literature