Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Indenopyrans - synthesis and photoluminescence properties.

ABSTRACT: New indeno[1,2-c]pyran-3-ones bearing different substituents at the pyran moiety were synthesized and their photophysical properties were investigated. In solution all compounds were found to be blue emitters and the trans isomers exhibited significantly higher fluorescence quantum yields (relative to 9,10-diphenylanthracene) as compared to the corresponding cis isomers. The solid-state fluorescence spectra revealed an important red shift of ?max due to intermolecular interactions in the lattice, along with an emission-band broadening, as compared to the solution fluorescence spectra.

SUBMITTER: Diac AP

PROVIDER: S-EPMC4901902 | biostudies-other | 2016

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Indenopyrans - synthesis and photoluminescence properties.

Diac Andreea Petronela AP Ţepeş Ana-Maria AM Soran Albert A Grosu Ion I Terec Anamaria A Roncali Jean J Bogdan Elena E

Beilstein journal of organic chemistry 20160427

New indeno[1,2-c]pyran-3-ones bearing different substituents at the pyran moiety were synthesized and their photophysical properties were investigated. In solution all compounds were found to be blue emitters and the trans isomers exhibited significantly higher fluorescence quantum yields (relative to 9,10-diphenylanthracene) as compared to the corresponding cis isomers. The solid-state fluorescence spectra revealed an important red shift of λmax due to intermolecular interactions in the lattice ...[more]

PMID: 27340473

Similar Datasets

Synthesis, Photoluminescence and Vibrational Properties of Aziridinium Lead Halide Perovskites

Project description:Three-dimensional lead halide perovskites are known for their excellent optoelectronic properties, making them suitable for photovoltaic and light-emitting applications. Here, we report for the first time the Raman spectra and photoluminescent (PL) properties of recently discovered three-dimensional aziridinium lead halide perovskites (AZPbX3, X = Cl, Br, I), as well as assignment of vibrational modes. We also report diffuse reflection data, which revealed an extended absorption of light of AZPbX3 compared to the MA and FA counterparts and are beneficial for solar cell application. We demonstrated that this behavior is correlated with the size of the organic cation, i.e., the energy band gap of the cubic lead halide perovskites decreases with the increasing size of the organic cation. All compounds show intense PL, which weakens on heating and shifts toward higher energies. This PL is red shifted compared to the FA and MA counterparts. An analysis of the PL data revealed the small exciton binding energy of AZPbX3 compounds (29–56 meV). Overall, the properties of AZPbX3 are very similar to those of the well-known MAPbX3 and FAPbX3 perovskites, indicating that the aziridinium analogues are also attractive materials for light-emitting and solar cell applications.

| S-EPMC9698367 | biostudies-literature

CdSe Ring- and Tribulus-Shaped Nanocrystals: Controlled Synthesis, Growth Mechanism, and Photoluminescence Properties.

Project description:With air-stable and generic reagents, CdSe nanocrystals with tunable morphologies were prepared by controlling the temperature in the solution reaction route. Thereinto, the lower reaction temperature facilitates the anisotropic growth of crystals to obtain high-yield CdSe ring- and tribulus-shaped nanocrystals with many branches on their surfaces. The photoluminescence properties are sensitive to the nature of particle and its surface. The products synthesized at room temperature, whose surfaces have many branches, show higher blue shift and narrower emission linewidths (FWHM) of photoluminescence than that of samples prepared at higher temperature, whose surfaces have no branches. Microstructural studies revealed that the products formed through self-assembly of primary crystallites. Nanorings formed through the nonlinear attachment of primary crystallites, and the branches on the surfaces grew by linear attachment at room temperature. And the structure of tribulus-shaped nanoparticle was realized via two steps of aggregation, i.e., random and linear oriented aggregation. Along with the elevation of temperature, the branches on nanocrystal surfaces shortened gradually because of the weakened linear attachment. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s11671-009-9265-2) contains supplementary material, which is available to authorized users.

| S-EPMC2894197 | biostudies-literature

Synthesis, dielectric, magnetic, and photoluminescence properties of two new hybrid rare-earth double perovskites.

Project description:Two new organic-inorganic hybrid double perovskites (R3HQ)4CsSm(NO3)8 (1) (R3HQ = (R)-(-)-3-quinuclidinol) and (R3HQ)4CsEu(NO3)8 (2) were synthesized and characterized. Compounds 1 and 2 exhibit obvious phase transitions at 379 and 375 K, respectively, confirmed by differential scanning calorimetry (DSC) and variable temperature powder X-ray diffraction. The rapid switching between high- and low-dielectric states makes it a typical dielectric material with a switchable dielectric constant for thermal stimulus response. Furthermore, 1 and 2 show attractive photoluminescence and paramagnetic behavior, and the fluorescence quantum yield of 2 reached 14.6%. These results show that compounds 1 and 2 can be used as excellent candidates for multifunctional intelligent materials, which also provides a new way for development of multifunctional materials.

| S-EPMC9389020 | biostudies-literature

NaGd(MoO4)2 nanocrystals with diverse morphologies: controlled synthesis, growth mechanism, photoluminescence and thermometric properties.

Project description:Pure tetragonal phase, uniform and well-crystallized sodium gadolinium molybdate (NaGd(MoO4)2) nanocrystals with diverse morphologies, e.g. nanocylinders, nanocubes and square nanoplates have been selectively synthesized via oleic acid-mediated hydrothermal method. The phase, structure, morphology and composition of the as-synthesized products are studied. Contents of both sodium molybdate and oleic acid of the precursor solutions are found to affect the morphologies of the products significantly, and oleic acid plays a key role in the morphology-controlled synthesis of NaGd(MoO4)2 nanocrystals with diverse morphologies. Growth mechanism of NaGd(MoO4)2 nanocrystals is proposed based on time-dependent morphology evolution and X-ray diffraction analysis. Morphology-dependent down-shifting photoluminescence properties of NaGd(MoO4)2: Eu(3+) nanocrystals, and upconversion photoluminescence properties of NaGd(MoO4)2: Yb(3+)/Er(3+) and Yb(3+)/Tm(3+) nanoplates are investigated in detail. Charge transfer band in the down-shifting excitation spectra shows a slight blue-shift, and the luminescence intensities and lifetimes of Eu(3+) are decreased gradually with the morphology of the nanocrystals varying from nanocubes to thin square nanoplates. Upconversion energy transfer mechanisms of NaGd(MoO4)2: Yb(3+)/Er(3+), Yb(3+)/Tm(3+) nanoplates are proposed based on the energy level scheme and power dependence of upconversion emissions. Thermometric properties of NaGd(MoO4)2: Yb(3+)/Er(3+) nanoplates are investigated, and the maximum sensitivity is determined to be 0.01333?K(-1) at 285?K.

| S-EPMC4979211 | biostudies-literature

Investigations of adsorption and photoluminescence properties of encapsulated Al-ZnO nanostructures: Synthesis, morphology and dye degradation studies.

Project description:This study focuses on the solution combustion approach to examine the nanostructures of undoped and doped ZnO with different concentrations of Al (0.1 % and 0.2 %). Various physical techniques were utilized to characterize the synthesized nanoparticles. X-ray diffraction (XRD) revealed the crystalline materials, while scanning electron microscopy (SEM) with energy-dispersive X-ray (EDX) findings confirmed the products with particle size and the insertion of Al into the ZnO lattice. Fourier-transform infrared spectra (FTIR) confirmed the presence of different functional groups in the obtained material. The results indicate that Al-doped ZnO (Al-ZnO) nanoparticles show promising properties for optoelectronics and photoluminescence. Photoluminescence analysis indicated that an increase in Al3+ (0.2 %) concentration resulted in a decrease in peak intensity and an increase in the full width at half maximum. The band gap was calculated using the Taucs plot. The study also highlights the effectiveness of Zn1-xAlxO nanostructures in degrading organic pollutants, particularly in adsorbing Malachite Green (MG) dye. Among the samples, the 0.2 % Al-doped ZnO exhibited superior dye degradation efficiency due to its enhanced adsorption capacity and smaller particle size, as evidenced by multilayer adsorption capacity and chemisorption during the degradation process. This study provides valuable insights into the potential applications of Al-doped ZnO nanoparticles in various environmental and technological fields, emphasizing their significance in the degradation of organic pollutants.

| S-EPMC11298942 | biostudies-literature

Pyrene-Functionalized Polyacetylenes: Synthesis and Photoluminescence Property.

Project description:Four pyrene-functionalized polyacetylenes were designed and prepared through a typical post-polymerization modification route, which is the highly efficient reaction between activated ester and primary anime groups. The chemical structures of the resultant polymers were characterized with multiple spectroscopic techniques and the data indicated the successful functionalization of the polyacetylenes. The introduction of the pyrene moieties into the polymer structure allowed us to investigate the interactions between the polymer backbone and side chains. For the mono-substituted polyacetylenes, both the monomer and excimer emission features of the pyrene groups could be recorded, while for the di-substituted polyacetylenes, the fluorescence from the pyrene excimer vanished and the fluorescence intensity from the pyrene monomer decreased, the fluorescence from the polymer chain predominated the emission features. The concomitant energy transfer from the pyrene monomer and excimer to poly(diphenylacetylene) backbone was associated with the underlying mechanism. In addition to the substitution modes, the linkage between the poly(diphenylacetylene) backbone and the pyrene moiety also played a significant role in the determination of the emission species. A long alkyl spacer was beneficial to the pyrene monomer emission while a short one may be helpful to the formation of the excimer and intramolecular energy transfer.

| S-EPMC6723286 | biostudies-literature

Combustion Synthesis and Photoluminescence Properties of Red-Emitting CaAlSiN₃:Eu2+ Phosphor for White-LEDs.

Project description:A combustion synthesis method has been developed for synthesis of Eu2+ doped CaAlSiN₃ phosphor and its photoluminescence properties were investigated. Ca, Al, Si, and Eu₂O₃ powders were used as the Ca, Al, Si and Eu sources. The addition of NaN₃, NH₄Cl and Si₃N₄ powders was found to increase significantly the product yield. These powders were mixed and pressed into a compact, which was then wrapped up with an igniting agent (i.e., Mg+Fe₃O₄). The compact was ignited by electrical heating under a N₂ pressure of ≤1.0 MPa. Effects of these experimental parameters on the product yield were investigated and a reaction mechanism was proposed. The synthesized CaAlSiN₃:Eu2+ phosphor absorbs light in the region of 200-600 nm and shows a broad band emission in the region of 500-800 nm due to the 4f⁶5d¹ → 4f⁷ transition of Eu2+. The sample doped with Eu2+ at the optimized molar ratio of 0.04 is efficiently excited by the blue light (460 nm) and generates emission peaking at ~650 nm with peak emission intensity ~106% of a commercially available phosphor, YAG:Ce3+(P46-Y3).The internal quantum efficiency of the synthesized phosphor was measured to be 71%, compared to 69% of the YAG:Ce3+ (P46-Y3).

| S-EPMC5456445 | biostudies-other

Synthesis and Photoluminescence of Tetracyanidonitridorhenium(V) Complexes with Five-Membered N-Heteroaromatic Ligands and Photoluminescence-Intensity Change.

Project description:Novel tetracyanidonitridorhenium(V) complexes with five-membered N-heteroaromatic ligands, (PPh4)2[ReN(CN)4L] [L = imidazole (Him) (2), 1-methylimidazole (Mim) (3), and pyrazole (pyz) (4)] and (PPh4)2[ReN(CN)4L]·L [L = Him (5) and Mim (6)], were synthesized by the reactions of (PPh4)2[ReN(CN)4] (1) with Him, Mim, and pyz, and their structures were determined by single-crystal X-ray analysis. The complexes 2, 3, 4, and 6 showed intense photoluminescence, with the emission quantum yields (Φem) being 0.65-0.75 in the solid state at 296 K. In contrast, the Φem and τem values of 5 are significantly smaller and shorter, respectively, than the relevant values of 2. The interconversion reactions among 1, 2, and 5 accompanied by large photoluminescence-intensity changes were accomplished by solvent-free reactions and exposure of water. The mechanochemical reaction of 2 with 1 mol equiv of Him in the solid state gave 5. Complex 5 was also obtained by the mechanochemical reaction of 1 with 2 mol equivalents of Him in the solid state. By placing solid of 5 in water, the solid showed intense photoluminescence to give 2. Complex 1 was produced under vacuum at 185 °C from 2 or 5.

| S-EPMC6921682 | biostudies-literature

Tunable Photoluminescence Properties of Cotton Fiber With Gradually Changing Crystallinity.

Project description:The alkali mercerizing process of semicrystalline cotton fiber (CF) is widely used in the printing and dyeing industry. The crystallinity change in the mercerizing process has been studied and certain laws have been obtained, but there is still a certain distance between the theoretical research results and the practical applications. CF is almost composed of cellulose, combined with the photoluminescence (PL) phenomenon of cellulose; herein, the varying crystallinity is correlated with its PL behavior after being treated with different concentrations of NaOH. In line with the characteristics of nonconventional luminogens, CF enjoys excitation-dependent emission and persistent room temperature phosphorescence (p-RTP) behavior. The emission spectra of all samples under the same excitation wavelength indicate that the change of CF crystallinity has a significant impact on its fluorescence and p-RTP emission. As the concentration of NaOH increases, the varying trend of quantum efficiency (QY) is consistent with the changed crystallinity of CF. Interestingly, the lifetime of p-RTP is exactly the opposite of the crystallinity change law. Clustering-triggered emission (CTE), crystallization-Induced Phosphorescence (CIP) mechanism, and the swelling due to hydrated sodium ions can reasonably explain these interesting photophysical processes, which also can be supported by theoretical calculations. The above studies have basically clarified the inherent law between the crystalline change of CF and the PL emission behavior during the alkali treatment process, which can be used as a theoretical reference for real-time monitoring of CF crystallinity changes using the spectral method in the actual cotton mercerizing process.

| S-EPMC9274137 | biostudies-literature

Spheres-in-Grating Assemblies with Altered Photoluminescence and Wetting Properties.

Project description:In this work, we report the fabrication of spheres-in-grating assemblies consisting of equally spaced parallel rectangular grooves filled with fluorescent spheres, by employing embossing and convective self-assembly methods. The developed hierarchical assemblies, when compared to spheres spin-cast on glass, exhibited a blueshift in the photoluminescence spectra, as well as changes in wetting properties induced not only by the patterning process, but also by the nature and size of the utilized spheres. While the patterning process led to increased hydrophobicity, the utilization of spheres with larger diameter improved the hydrophilicity of the fabricated assemblies. Finally, by aiming at the future integration of the spheres-in-grating assemblies as critical components in different technological and medical applications, we report a successful encapsulation of the incorporated spheres within the grating with a top layer of a functional polymer.

| S-EPMC9000395 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data