Dataset Information

Comparison of Surface Hardness of Various Shades of Twinky Star Colored Compomer Light-cured with QTH and LED Units.

ABSTRACT: Colored compomers are a group of restorative materials that were introduced in 2002 to repair primary teeth, and they provide attractive color and ease of use in pediatric dentistry. The aim of this study was to evaluate the effect of QTH and LED light-curing units on the surface hardness of different colors of Twinky Star compomers.In this experimental study, a composite resin (Z250, 3M, and USA), an ionosit compomer (DMG, Germany) with A3 shade and 8 different Twinky Star colored compomer (Voco, Germany) samples were used. In all, 100 samples were prepared with 10 samples in each group, i.e., 10 Z250 composite resin, 10 ionosit compomers, and 10 Twinky Star compomer samples of each color. The samples were prepared in a 4×4-mm Teflon mold. Half of the samples were light-cured with QTH and the other half with LED units. Then, the surface microhardness was measured by Vickers hardness test. The data were analyzed with IBM-SPSS version 22, using the t-test and ANOVA.Two-way ANOVA showed that the mean surface hardness of the compomer samples cured with the QTH unit was significantly higher than that cured with the LED unit (p < 0.001). In each curing unit, surface hardness of some materials exhibited significant differences with the highest hardness being observed in the Z250 composite resin (650.35 ± 56.320) and the lowest hardness being detected in the ionosit compomers (461.10 ± 96.170). One-way ANOVA also showed that, among the different colors of the Twinky Star compomer, the lowest hardness with both units (QTH and LED) was observed in the gold color (214.32 ± 22.026 and 175.116 ± 15.918, respectively).The colored compomer and the type of light-curing unit affected the microhardnesses of the surfaces. Different colors of Twinky Star compomers exhibited different surface microhardnesses.

SUBMITTER: Khodadadi E

PROVIDER: S-EPMC4930254 | biostudies-other | 2016 May

REPOSITORIES: biostudies-other

ACCESS DATA

Publications

Comparison of Surface Hardness of Various Shades of Twinky Star Colored Compomer Light-cured with QTH and LED Units.

Khodadadi Effat E Khafri Soraya S Aziznezhad Mahdiyeh M

Electronic physician 20160525 5

<h4>Introduction</h4>Colored compomers are a group of restorative materials that were introduced in 2002 to repair primary teeth, and they provide attractive color and ease of use in pediatric dentistry. The aim of this study was to evaluate the effect of QTH and LED light-curing units on the surface hardness of different colors of Twinky Star compomers.<h4>Methods</h4>In this experimental study, a composite resin (Z250, 3M, and USA), an ionosit compomer (DMG, Germany) with A3 shade and 8 differ ...[more]

PMID: 27382444

Similar Datasets

Project description:BackgroundRetrospective studies conducted in psychiatric wards have indicated a shorter duration of stay for depressed inpatients in bright compared to dim daylight-exposed rooms, pointing to a possible antidepressant effect of daylight conditions. Dynamic LED lighting, aiming to mimic daylight conditions, are currently been installed in several hospitals, but their feasibility is poorly investigated.MethodsTo investigate the feasibility of these systems, we developed and installed a LED-lighting system in four rooms in a psychiatric inpatient ward. The system could function statically or dynamically regarding light intensity and colour temperature. The system consisted of (A) a large LED luminaire built into the window jamb mimicking sunlight reflections, (B) two LED light luminaires in the ceiling and (C) a LED reading luminaire. In the static mode, the systems provided constant light from A and B. In the dynamic mode, the system changed light intensity and colour temperature using A, B and C. Patients with unipolar or bipolar depression were randomised to dynamic or static LED lighting for 4 weeks, in addition to standard treatment. Primary outcome was the rate of patients discontinuing the trial due to discomfort from the lighting condition. Secondary outcomes were recruitment and dropout rates, visual comfort, depressive symptoms and suicidal ideation.ResultsNo participants discontinued due to discomfort from the LED lighting. Recruitment rate was 39.8%, dropout from treatment rates were 56.3% in the dynamic group and 33.3% in the static group. 78.1% in the dynamic group were satisfied with the lighting compared with 71.8% in the static group. Discomfort from the light (glare) was reported by 11.5% in the dynamic group compared to 5.1% in the static group. Endpoint suicidal scores were 16.8 (10.4) in the dynamic and 16.3 (14.9) in the static group. The lighting system was 100% functional. The light sensor system proved unstable.ConclusionDropout from treatment was high primarily due to early discharge and with a lack of endpoint assessments. The feasibility study has influenced an upcoming large-scale dynamic lighting efficacy trial where we will use a shorter study period of 3 weeks and with more emphasis on endpoint assessments. The lighting was well tolerated in both groups, but some found intensity too low in the evening. Thus, we will use higher intensity blue-enriched light in the morning and higher intensity amber (blue-depleted) light in the evening in the upcoming study. The light sensor system needs to be improved.Trial registrationClinicalTrials.gov: NCT03363529.

Project description:INTRODUCTION:Retrospective studies conducted in psychiatric inpatient wards have shown a relation between the intensity of daylight in patient rooms and the length of stay, pointing to an antidepressant effect of ambient lighting conditions. Light therapy has shown a promising antidepressant effect when administered from a light box. The emergence of light-emitting diode (LED) technology has made it possible to build luminaires into rooms and to dynamically mimic the spectral and temporal distribution of daylight. The objective of this study is to investigate the antidepressant efficacy of a newly developed dynamic LED-lighting system installed in an inpatient ward. METHODS AND ANALYSIS:In all, 150 inpatients with a major depressive episode, as part of either a major depressive disorder or as part of a bipolar disorder, will be included. The design is a two-arm 1:1 randomised study with a dynamic LED-lighting arm and a static LED-lighting arm, both as add-on to usual treatment in an inpatient psychiatric ward. The primary outcome is the baseline adjusted score on the 6-item Hamilton Depression Rating Scale at week 3. The secondary outcomes are the mean score on the Suicidal Ideation Attributes Scale at week 3, the mean score on the 17-item Hamilton Depression Rating Scale at week 3 and the mean score on the World Health Organisation Quality of Life-BREF (WHOQOL-BREF) at week 3. The spectral distribution of daylight and LED-light, with a specific focus on light mediated through the intrinsically photosensitive retinal ganglion cells, will be measured. Use of light luminaires will be logged. Assessors of Hamilton Depression Rating Scale scores and data analysts will be blinded for treatment allocation. The study was initiated in May 2019 and will end in December 2021. ETHICS AND DISSEMINATION:No ethical issues are expected. Results will be published in peer-reviewed journals, disseminated electronically and in print and presented at symposia. TRIAL REGISTRATION NUMBER:NCT03821506; Pre-results.

Dataset Information

Comparison of Surface Hardness of Various Shades of Twinky Star Colored Compomer Light-cured with QTH and LED Units.

Publications

Comparison of Surface Hardness of Various Shades of Twinky Star Colored Compomer Light-cured with QTH and LED Units.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets