Browse
Submit Data
Databases
API
Help

Dataset Information

12 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Tuneable Giant Magnetocaloric Effect in (Mn,Fe)₂(P,Si) Materials by Co-B and Ni-B Co-Doping.

ABSTRACT: The influence of Co (Ni) and B co-doping on the structural, magnetic and magnetocaloric properties of (Mn,Fe) 2 (P,Si) compounds is investigated by X-ray diffraction (XRD), differential scanning calorimetry, magnetic and direct temperature change measurements. It is found that Co (Ni) and B co-doping is an effective approach to tune both the Curie temperature and the thermal hysteresis of (Mn,Fe) 2 (P,Si) materials without losing either the giant magnetocaloric effect or the positive effect of the B substitution on the mechanical stability. An increase in B concentration leads to a rapid decrease in thermal hysteresis, while an increase in the Co or Ni concentration hardly changes the thermal hysteresis of the (Mn,Fe) 2 (P,Si) compounds. However, the Curie temperature decreases slowly as a function of the Co or Ni content, while it increases dramatically for increasing B concentration. Hence, the co-substitution of Fe and P by Co (Ni) and B, respectively, offers a new control parameter to adjust the Curie temperature and reduce the thermal hysteresis of the (Mn,Fe) 2 (P,Si) materials.

SUBMITTER: Thang NV

PROVIDER: S-EPMC5344570 | biostudies-other | 2016 Dec

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Tunable Magnetocaloric Effect in Ni-Mn-Ga Microwires.

Project description:Magnetic refrigeration is of great interest due to its high energy efficiency, environmental friendliness and low cost. However, undesired hysteresis losses, concentrated working temperature interval (WTI) and poor mechanical stability are vital drawbacks that hinder its practical application. Off-stoichiometric Ni-Mn-Ga Heusler alloys are capable of giant magnetocaloric effect (MCE) and tunable transformation temperatures. Here, by creating Ni-Mn-Ga microwires with diameter of 35-80 ?m using a melt-extraction technique, negligible hysteresis and relatively good mechanical stability are found due to the high specific surface area (SSA) that reduces incompatibility between neighboring grains. The high SSA also favors the element evaporation at high temperatures so that the transformation temperatures can be feasibly adjusted. Tunable magnetocaloric effect owing to different magneto-structural coupling states is realized by (i) composition design and subsequent tuning, which adjusts the temperature difference between the martensite transformation (MT) and the magnetic transition, and (ii) creation of gradient composition distribution state, which manipulates the MT range. Magnetic entropy change ?Sm ~-18.5?J?kg-1 K-1 with relatively concentrated WTI and WTI up to ~60?K with net refrigeration capacity ~240?J?kg-1 at 50?kOe are demonstrated in the present Ni-Mn-Ga microwires. This criterion is also applicable for other small-sized materials.

| S-EPMC6224590 | biostudies-literature

Enhanced magnetocaloric effect in Ni-Mn-Sn-Co alloys with two successive magnetostructural transformations.

Project description:High magnetocaloric refrigeration performance requires large magnetic entropy change ?S M and broad working temperature span ?T FWHM . A fourth element doping of Co in ternary Ni-Mn-Sn alloy may significantly enhance the saturation magnetization of the alloy and thus enhance the ?S M . Here, the effects of Co-doping on the martensite transformation, magnetic properties and magnetocaloric effects (MCE) of quaternary Ni47-xMn43Sn10Cox (x?=?0, 6, 11) alloys were investigated. The martensite transformation temperatures decrease while austenite Curie point increases with Co content increasing to x?=?6 and 11, thus broadening the temperature window for a high magnetization austenite (13.5, 91.7 and 109.1?A·m2/kg for x?=?0, 6 and 11, respectively). Two successive magnetostructural transformations (A???10?M and A???10?M?+?6?M) occur in the alloy x?=?6, which are responsible for the giant magnetic entropy change ?S M?=? 29.5?J/kg·K, wide working temperature span ?T FWHM ?=?14?K and large effective refrigeration capacity RC eff ?=?232?J/kg under a magnetic field of 5.0?T. These results suggest that Ni40.6Mn43.3Sn10.0Co6.1 alloy may act as a potential solid-state magnetic refrigerant working at room temperature.

| S-EPMC5974186 | biostudies-literature

Role of disorder when upscaling magnetocaloric Ni-Co-Mn-Al Heusler alloys from thin films to ribbons.

Project description:Research in functional magnetic materials often employs thin films as model systems for finding new chemical compositions with promising properties. However, the scale-up of thin films towards bulk-like structures is challenging, since the material synthesis conditions are entirely different for thin films and e.g. rapid quenching methods. As one of the consequences, the type and degree of order in thin films and melt-spun ribbons are usually different, leading to different magnetic properties. In this work, using the example of magnetocaloric Ni-Co-Mn-Al melt-spun ribbons and thin films, we show that the excellent functional properties of the films can be reproduced also in ribbons, if an appropriate heat treatment is applied, that installs the right degree of order in the ribbons. We show that some chemical disorder is needed to get a pronounced and sharp martensitic transition. Increasing the order with annealing improves the magnetic properties only up to a point where selected types of disorder survive, which in turn compromise the magnetic properties. These findings allow us to understand the impact of the type and degree of disorder on the functional properties, paving the way for a faster transfer of combinatorial thin film research towards bulk-like materials for magnetic Heusler alloys.

| S-EPMC6002362 | biostudies-literature

Reversible tuning of magnetocaloric Ni-Mn-Ga-Co films on ferroelectric PMN-PT substrates.

Project description:Tuning functional properties of thin caloric films by mechanical stress is currently of high interest. In particular, a controllable magnetisation or transition temperature is desired for improved usability in magnetocaloric devices. Here, we present results of epitaxial magnetocaloric Ni-Mn-Ga-Co thin films on ferroelectric Pb(Mg1/3Nb2/3)0.72Ti0.28O3 (PMN-PT) substrates. Utilizing X-ray diffraction measurements, we demonstrate that the strain induced in the substrate by application of an electric field can be transferred to the thin film, resulting in a change of the lattice parameters. We examined the consequences of this strain on the magnetic properties of the thin film by temperature- and electric field-dependent measurements. We did not observe a change of martensitic transformation temperature but a reversible change of magnetisation within the austenitic state, which we attribute to the intrinsic magnetic instability of this metamagnetic Heusler alloy. We demonstrate an electric field-controlled entropy change of about 31?% of the magnetocaloric effect - without any hysteresis.

| S-EPMC5663903 | biostudies-other

Magnetic relaxation dynamics driven by the first-order character of magnetocaloric La(Fe,Mn,Si)13.

Project description:Here, we study the temporal evolution of the magnetic field-driven paramagnetic to ferromagnetic transition in the La(Fe,Mn,Si)13 material family. Three compositions are chosen that show varying strengths of the first-order character of the transition, as determined by the relative magnitude of their magnetic hysteresis and temperature separation between the zero-field transition temperature Tc and the temperature Tcrit, where the transition becomes continuous. Systematic variations in the fixed field, isothermal rate of relaxation are observed as a function of temperature and as a function of the degree of first-order character. The relaxation rate is reduced in more weakly first-order compositions and is also reduced as the temperature is increased towards Tcrit At temperatures above Tcrit, the metastability of the transition vanishes along with its associated temporal dynamics.This article is part of the themed issue 'Taking the temperature of phase transitions in cool materials'.

| S-EPMC4938066 | biostudies-other

Critical dependence of magnetostructural coupling and magnetocaloric effect on particle size in Mn-Fe-Ni-Ge compounds.

Project description:Magnetostructural coupling, which is the coincidence of crystallographic and magnetic transition, has obtained intense attention for its abundant magnetoresponse effects and promising technological applications, such as solid-state refrigeration, magnetic actuators and sensors. The hexagonal Ni2In-type compounds have attracted much attraction due to the strong magnetostructural coupling and the resulted giant negative thermal expansion and magnetocaloric effect. However, the as-prepared samples are quite brittle and naturally collapse into powders. Here, we report the effect of particle size on the magnetostructural coupling and magnetocaloric effect in the Ni2In-type Mn-Fe-Ni-Ge compound, which undergoes a large lattice change across the transformation from paramagnetic austenite to ferromagnetic martensite. The disappearance of martensitic transformation in a large amount of austenitic phase with reducing particle size, to our best knowledge, has not been reported up to now. The ratio can be as high as 40.6% when the MnNi0.8Fe0.2Ge bulk was broken into particles in the size range of 5~15 μm. Meanwhile, the remained magnetostructural transition gets wider and the magnetic hysteresis becomes smaller. As a result, the entropy change drops, but the effective cooling power RCeffe increases and attains to the maximum at particles in the range of 20~40 μm. These observations provide constructive information and highly benefit practical applications for this class of novel magnetoresponse materials.

| S-EPMC4756685 | biostudies-other

Ab Initio Study of AMBO<sub>3</sub> (A = Li, Na and M = Mn, Fe, Co, Ni) as Cathode Materials for Li-Ion and Na-Ion Batteries.

Project description:According to the importance of polyanion cathode materials in intercalation batteries, they may play a significant role in energy-storage systems. Here, evaluations of LiMBO3 and NaMBO3 (M = Mn, Fe, Co, Ni) as cathode materials of Li-ion and Na-ion batteries, respectively, are performed in the density functional theory (DFT) framework. The structural properties, structural stability after deintercalation, cell voltage, electrical conductivity, and rate capability of the cathodes are assessed. As a result, Li compounds have more structural stability and energy density than Na compounds in the C2/c frame structure. Cell voltage is increased by increasing the atomic number of the transition metal (TM). A noble approach is used to evaluate electrical conductivity and rate capability. M = Fe compounds exhibit the lowest band gaps (BGs), and M = Mn compounds exhibit almost the highest one. The best electrical rate-capable compounds are estimated to be M = Mn ones and the worst are M = Ni ones. As far as cell potential is not the concern, AMnBO3, ACoBO3-AFeBO3, and ANiBO3 are the best to the worst considered cathode materials.

| S-EPMC7178776 | biostudies-literature

Influence of interconfigurational electronic States On Fe, Co, Ni-silicene materials selection for spintronics.

Project description:Growth through controlled adsorption of ferromagnetic elements such as Fe, Co and Ni on two-dimensional silicene provides an alternative route for silicon-based spintronics. Plane wave DFT calculations show that Fe, Co and Ni adatoms are strongly chemisorbed via strong sigma bonds, with adsorption energies (1.55 - 2.29 eV) that are two to six times greater compared to adsorption on graphene. All adatoms adsorb more strongly at the hole site than at the atom site, with Ni adsorbing strongest. Of the dimer configurations investigated, the hole--hole, b-atom--hole, vertically stacked at hole, vertically stacked at b-atom and bridge sites were found to be stable. The Co and Ni dimers are most stable when adsorbed in the hole-hole configuration while the Fe dimer is most stable when adsorbed in the atom-hole configuration. Metal-to-silicene and interconfigurational s-to-d electron transfer processes underpin the trends observed in adsorption energies and magnetic moments for both adatoms and dimers. Adsorption of these metals induces a small band gap at the Dirac Cone. In particular Co adatom adsorption at the hole site induces the largest spin-polarized band gaps of 0.70 eV (spin-up) and 0.28 eV (spin-down) making it a potential material candidate for spintronics applications.

| S-EPMC4274514 | biostudies-other

Negative Thermal Expansion in the Materials With Giant Magnetocaloric Effect.

Project description:Negative thermal expansion (NTE) behaviors in the materials with giant magnetocaloric effects (MCE) have been reviewed. Attentions are mainly focused on the hexagonal Ni2In-type MM'X compounds. Other MCE materials, such as La(Fe,Si)13, RCo2, and antiperovskite compounds are also simply introduced. The novel MCE and phase-transition-type NTE materials have similar physics origin though the applications are distinct. Spin-lattice coupling plays a key role for the both effect of NTE and giant MCE. Most of the giant MCE materials show abnormal lattice expansion owing to magnetic interactions, which provides a natural platform for exploring NTE materials. We anticipate that the present review can help finding more ways to regulate phase transition and dig novel NTE materials.

| S-EPMC6167418 | biostudies-other