Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ceramic Laser Materials.

ABSTRACT: Ceramic laser materials have come a long way since the first demonstration of lasing in 1964. Improvements in powder synthesis and ceramic sintering as well as novel ideas have led to notable achievements. These include the first Nd:yttrium aluminum garnet (YAG) ceramic laser in 1995, breaking the 1 KW mark in 2002 and then the remarkable demonstration of more than 100 KW output power from a YAG ceramic laser system in 2009. Additional developments have included highly doped microchip lasers, ultrashort pulse lasers, novel materials such as sesquioxides, fluoride ceramic lasers, selenide ceramic lasers in the 2 to 3 μm region, composite ceramic lasers for better thermal management, and single crystal lasers derived from polycrystalline ceramics. This paper highlights some of these notable achievements.

SUBMITTER: Sanghera J

PROVIDER: S-EPMC5448906 | biostudies-other | 2012 Feb

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Wear of ceramic-based dental materials.

Project description:An investigation is made of wear mechanisms in a suite of dental materials with a ceramic component and tooth enamel using a laboratory test that simulates clinically observable wear facets. A ball-on-3-specimen wear tester in a tetrahedral configuration with a rotating hard antagonist zirconia sphere is used to produce circular wear scars on polished surfaces of dental materials in artificial saliva. Images of the wear scars enable interpretation of wear mechanisms, and measurements of scar dimensions quantify wear rates. Rates are lowest for zirconia ceramics, highest for lithium disilicate, with feldspathic ceramic and ceramic-polymer composite intermediate. Examination of wear scars reveals surface debris, indicative of a mechanism of material removal at the microstructural level. Microplasticity and microcracking models account for mild and severe wear regions. Wear models are used to evaluate potential longevity for each dental material. It is demonstrated that controlled laboratory testing can identify and quantify wear susceptibility under conditions that reflect the essence of basic occlusal contact. In addition to causing severe material loss, wear damage can lead to premature tooth or prosthetic failure.

| S-EPMC6414209 | biostudies-literature

Ceramic

Project description:Post-Infective Bowel Dysfunction following Campylobacter enteritis is characterised by reduced microbiota diversity and impaired microbiota recovery

| PRJEB52306 | ENA

Project description:In this work we report the white light emission in transparent Cr:YAG ceramic pellet upon irradiation with focused beam of CW infrared laser diode. It was found that this phenomenon is specifically related to interaction of laser beam with a surface of the pellet. The white light was emitted outside an irradiated spot at the surface of the pellet and did not penetrate inside the pellet. Moreover, the red emission related to two-photon absorption along the laser beam penetrating the Cr3+:YAG pellet was observed. Interaction of the laser beam with the surface of the pellet leads to an efficient white light emission from an outer side of the pellet. The resulting white light emission did not entry back the pellet. Multiphoton ionization leading to intervalence charge transfer followed by light emission was proposed as the mechanism of experimentally observed white light emission.

| S-EPMC8263758 | biostudies-literature

Nanostructured Glass-Ceramic Materials from Glass Waste with Antimicrobial Activity

Project description: Not available

| S-EPMC11243445 | biostudies-literature

Evaluation of Rhodamine B Photocatalytic Degradation over BaTiO3-MnO2 Ceramic Materials.

Project description:Ferroelectric ceramics (BaTiO3_MnO2) with different Mn admixtures were prepared using solid-state synthesis. Elemental analysis, powder X-ray diffraction, scanning electron microscopy, Fourier-transform infrared spectroscopy, and impedance spectroscopy confirmed that the BaTiO3 and MnO2 coexisted in the ceramics. In addition, the high purity and homogeneity of the element distributions in the ceramic samples were confirmed. The adsorptive and photocatalytic properties of the BaTiO3 (reference sample, BTO) and BaTiO3_MnO2 materials (BTO_x, where x is wt.% of MnO2 and x = 1, 2 or 3, denoted as BTO_1, BTO_2 and BTO_3, respectively) were evaluated using Rhodamine B (RhB) as the model dye in a photocatalytic chamber equipped with a UV lamp (15 W) in the absence of additional oxidants and (co)catalysts. No adsorption of RhB dye was found for all the materials during 360 min (dark experiment). All samples were photocatalytically active, and the best results were observed for the BTO_3 material, where RhB was 70% removed from aqueous solution during 360 min of irradiation. The photodegradation of RhB in the presence of MnO2-modified BTO ceramics followed a pseudo-first order model and the rate constant of BTO_3 was about 10 times higher than that of BTO, 2 times that of BTO_2, and 1.5 times that of BTO_1. The photocatalysts could be successfully reused after thermal activation.

| S-EPMC8228469 | biostudies-literature

Study of the Wavelength Dependence in Laser Ablation of Advanced Ceramics and Glass-Ceramic Materials in the Nanosecond Range.

Project description:In this work, geometrical dimensions and ablation yields as a function of the machining method and reference position were studied when advanced ceramics and glass-ceramic materials were machined with pulsed lasers in the nanosecond range. Two laser systems, emitting at 1064 and 532 nm, were used. It was shown that the features obtained depend on whether the substrate is processed by means of pulse bursts or by grooves. In particular, when the samples were processed by grooves, machined depth, removed volume and ablation yields reached their maximum, placing the sample out of focus. It was shown that these characteristics do not depend on the processing conditions, the wavelength or the optical configuration, and that this is intrinsic behavior of the processing method. Furthermore, the existence of a close relation between material hardness and ablation yields was demonstrated.

| S-EPMC5452771 | biostudies-other

Non-resonant power-efficient directional Nd:YAG ceramic laser using a scattering cavity.

Project description:Non-resonant lasers exhibit the potential for stable and consistent narrowband light sources. Furthermore, non-resonant lasers do not require well-defined optics, and thus has considerably diversified the available types of laser gain materials including powders, films, and turbid ceramics. Despite these intrinsic advantages, the practical applications of non-resonant lasers have been limited so far, mainly because of their low power efficiency and omnidirectional emission. To overcome these limitations, here we propose a light trap design for non-resonant lasers based on a spherical scattering cavity with a small entrance. Using a porous Nd3+:YAG ceramic, directional laser emission could be observed with significant enhancements in the slope efficiency and linewidth (down to 32 pm). A theoretical model is also developed to describe and predict the operation characteristics of proposed non-resonant laser.

| S-EPMC7782720 | biostudies-literature

Ceramic Materials and Technologies Applied to Digital Works in Implant-Supported Restorative Dentistry.

Project description:Computer-aided design and manufacturing technology has been closely associated with implant-supported restoration. The digital system employed for prosthodontic restorations comprises data acquisition, processing, and manufacturing using subtractive or additive methods. As digital implantology has developed, optical scanning, computer-based digital algorithms, fabricating techniques, and numerical control skills have all rapidly improved in terms of their accuracy, which has resulted in the development of new ceramic materials with advanced esthetics and durability for clinical application. This study reviews the application of digital technology in implant-supported dental restoration and explores two globally utilized ceramic restorative materials: Yttria-stabilized tetragonal zirconia polycrystalline and lithium disilicate glass ceramics.

| S-EPMC7216107 | biostudies-literature

Introducing Engineering Design and Materials Science at an Earlier Age through Ceramic Cold Casting.

Project description:Elementary and middle school science curriculums typically focus on generating an interest in science and engineering through the use of hands-on activities that demonstrate specific concepts. Laboratory activities designed in this manner often circumvent some of the main challenges that engineers and scientists face, namely balancing advantages and disadvantages for a variety of potential solutions to solve a specific problem. This activity was designed to show students that different solutions for a given problem can exist, and engineers must manage priorities when choosing the best solution. This laboratory involves cold casting ceramics slurries with varying viscosities into a mold. The resulting casts have a varying final density, controlled by the initial viscosity. Students are presented with different outcome measures regarding the objects they cast: ease of manufacturing, cost, aesthetics, and mechanical properties. Based on the laboratory design, no single cast will perform the best in any of these categories. The students are then asked to choose the best mold, and justify their answers based on the initial problem presented to them by balancing which outcome measures they consider to be important for solving this specific problem. This laboratory teaches basic science concepts like viscosity and density, while addressing common industrial manufacturing issues, such as cost and ease of manufacturing. Through a combination of these features, this laboratory introduces engineering and design concepts using the scientific method to students at an earlier age.

| S-EPMC6521834 | biostudies-literature

The possibility of giant dielectric materials for multilayer ceramic capacitors.

Project description:There have been numerous reports on discovery of giant dielectric permittivity materials called internal barrier layer capacitor in the recent years. We took particular note of one of such materials, i.e., BaTiO3 with SiO2 coating. It shows expressions of giant electric permittivity when processed by spark plasma sintering. So we evaluated various electrical characteristics of this material to find out whether it is applicable to multilayer ceramic capacitors. Our evaluation revealed that the isolated surface structure is the sole cause of expressions of giant dielectric permittivity.

| S-EPMC3585747 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data