Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Adsorption Properties of Doxorubicin Hydrochloride onto Graphene Oxide: Equilibrium, Kinetic and Thermodynamic Studies.

ABSTRACT: Doxorubicin hydrochloride (DOX) is an effective anticancer agent for leukemia chemotherapy, although its clinical use has been limited because of its side effects such as cardiotoxicity, alopecia, vomiting, and leucopenia. Attention has been focussed on developing new drug carriers with high adsorption capacity and rapid adsorption rate in order to minimize the side effects of DOX. Graphene oxide (GO), a new type of nanomaterial in the carbon family, was prepared by Hummers method and used as adsorbent for DOX from aqueous solution. The physico-chemical properties of GO were characterized by transmission electron microscope (TEM), Fourier transform infrared spectroscopy (FTIR), zeta potential, and element analysis. The adsorption properties of DOX on GO were studied as a function of contact time, adsorbent dosage, temperature and pH value. The results showed that GO had a maximum adsorption capacity of 1428.57 mg/g and the adsorption isotherm data fitted the Langmuir model. The kinetics of adsorption fits a pseudo-second-order model. The thermodynamic studies indicate that the adsorption of DOX on GO is spontaneous and endothermic in nature.

SUBMITTER: Wu S

PROVIDER: S-EPMC5452512 | biostudies-other | 2013 May

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Adsorption of Brilliant Green Dye onto a Mercerized Biosorbent: Kinetic, Thermodynamic, and Molecular Docking Studies.

Project description:This study reports the valorization of pistachio shell agricultural waste, aiming to develop an eco-friendly and cost-effective biosorbent for cationic brilliant green (BG) dye adsorption from aqueous media. Pistachio shells were mercerized in an alkaline environment, resulting in the treated adsorbent (PSNaOH). The morphological and structural features of the adsorbent were analyzed using scanning electron microscopy, Fourier transform infrared spectroscopy, and polarized light microscopy. The pseudo-first-order (PFO) kinetic model best described the adsorption kinetics of the BG cationic dye onto PSNaOH biosorbents. In turn, the equilibrium data were best fitted to the Sips isotherm model. The maximum adsorption capacity decreased with temperature (from 52.42 mg/g at 300 K to 46.42 mg/g at 330 K). The isotherm parameters indicated improved affinity between the biosorbent surface and BG molecules at lower temperatures (300 K). The thermodynamic parameters estimated on the basis of the two approaches indicated a spontaneous (ΔG < 0) and exothermic (ΔH < 0) adsorption process. The design of experiments (DoE) and the response surface methodology (RSM) were employed to establish optimal conditions (sorbent dose (SD) = 4.0 g/L and initial concentration (C0) = 10.1 mg/L), yielding removal efficiency of 98.78%. Molecular docking simulations were performed to disclose the intermolecular interactions between the BG dye and lignocellulose-based adsorbent.

| S-EPMC10222809 | biostudies-literature

Adsorption of Omeprazole on Biobased Adsorbents Doped with Si/Mg: Kinetic, Equilibrium, and Thermodynamic Studies.

Project description:This paper proposes an easy and sustainable method to prepare high-sorption capacity biobased adsorbents from wood waste. A biomass wood waste (spruce bark) was employed to fabricate a composite doped with Si and Mg and applied to adsorb an emerging contaminant (Omeprezole) from aqueous solutions, as well as synthetic effluents loaded with several emerging contaminants. The effects of Si and Mg doping on the biobased material's physicochemical properties and adsorptive performance were evaluated. Si and Mg did not influence the specific surface area values but impacted the presence of the higher number of mesopores. The kinetic and equilibrium data presented the best fitness by the Avrami Fractional order (AFO) and Liu isotherm models, respectively. The values of Qmax ranged from 72.70 to 110.2 mg g-1 (BP) and from 107.6 to 249.0 mg g-1 (BTM). The kinetic was faster for Si/Mg-doped carbon adsorbent, possibly due to different chemical features provoked by the doping process. The thermodynamic data showed that the adsorption of OME on biobased adsorbents was spontaneous and favorable at four studied temperatures (283, 293, 298, 303, 308, 313, and 318 K), with the magnitude of the adsorption correspondent to a physical adsorption process (ΔH° < 2 kJ mol-1). The adsorbents were applied to treat synthetic hospital effluents and exhibited a high percentage of removal (up to 62%). The results of this work show that the composite between spruce bark biomass and Si/Mg was an efficient adsorbent for OME removal. Therefore, this study can help open new strategies for developing sustainable and effective adsorbents to tackle water pollution.

| S-EPMC10302240 | biostudies-literature

Optimization of Cr(VI) biosorption onto <i>Aspergillus niger</i> using 3-level Box-Behnken design: Equilibrium, kinetic, thermodynamic and regeneration studies.

Project description:Heavy metal biosorption is an efficient technology for the decontamination of metal from industrial waste water. The present study focused on exploration of Aspergillus niger towards removal of Cr(VI) from aqueous solution. The influence of different experimental parameters-initial pH, adsorbent dose, initial concentration, contact time, shaking speed, temperature, and their combined effect during Cr(VI) adsorption-was investigated by means of response surface methodology based on four factorial Box-Behnken experimental design. Optimized values of initial Cr(VI) concentration, pH, adsorbent dose, and contact time were found as 33.33 mg/L, 4.6, 1.0 g/L, and 48.45 min, respectively. A. niger showed the highest adsorption capacity 11.792 mg/g at initial pH 2.0. Equilibrium data fitted well to the Temkin and Freundlich isotherms. Cr(VI) biosorption showed Pseudo-second order rate kinetics. The activation energy of the adsorption was estimated as 2.9 × 10-3 kJ/mol. Thermodynamics properties of the Cr(VI) biosorption was spontaneous in nature. Desorption study showed that nearly 94% of the Cr(VI) adsorbed on A. niger could be desorbed using 0.5 M EDTA.

| S-EPMC6296609 | biostudies-literature

Competitive adsorption of metals onto magnetic graphene oxide: comparison with other carbonaceous adsorbents.

Project description:Competitive adsorption isotherms of Cu(II), Pb(II), and Cd(II) were examined on a magnetic graphene oxide (GO), multiwalled carbon nanotubes (MWCNTs), and powered activated carbon (PAC). A series of analyses confirmed the successful synthesis of the magnetic GO based on a simple ultrasonification method. Irrespective of the adsorbents, the adsorption was highly dependent on pH, and the adsorption was well described by the Langmuir isotherm model. The maximum adsorption capacities of the adsorbents were generally higher in the order of Pb(II)>Cu(II)>Cd(II), which is the same as the degree of the electronegativity and the hydrated radius of the metals, suggesting that the metal adsorption may be governed by an ion exchange between positively charged metals and negatively charged surfaces, as well as diffusion of metals into the surface layer. The adsorption of each metal was mostly lower for multi- versus single-metal systems. The antagonistic effects were influenced by solution pH as well as the type of metals, and they were higher in the order of the magnetic GO>MWCNT>PAC. Dissolved HS played a greater role than HS adsorbed onto the adsorbents, competing with the adsorption sites for metal complexation.

| S-EPMC4377472 | biostudies-literature

Selective removal of lead ions from aqueous solutions using 1,8-dihydroxyanthraquinone (DHAQ) functionalized graphene oxide; isotherm, kinetic and thermodynamic studies.

Project description:An anthraquinone - graphene structure was fabricated and applied for the removal of lead(ii) from aqueous solution. The equilibrium occurred in about 10 min revealing the high adsorption rate at the beginning of the process. The maximum Pb(ii) adsorption capacity of the Fe3O4@DHAQ_GO nanocomposite was about 283.5 mg g-1 that was observed at 323 K and pH 5.5. The Pb(ii) adsorption ability increased with the increasing pH. The isotherm and kinetic studies indicated that the Sips isotherm model and the linear form of the pseudo-second kinetic model had a better fit with the experimental results. The positive value of ΔH 0 indicated endothermic interactions between Pb(ii) and Fe3O4@DHAQ_GO. The negative ΔG 0 indicated that the reactions are spontaneous with a high affinity for Pb(ii). The positive ΔS 0 values indicated increasing randomness at the solid-solute interface during the adsorption process. The selective removal of Pb(ii) by the nanocomposite confirms the presence of higher-affinity binding sites for Pb(ii) than Cd(ii), Co(ii), Zn(ii), and Ni(ii) ions. Furthermore, the Fe3O4@DHAQ_GO nanocomposite revealed an excellent preferential adsorbent for Pb(ii) spiked in drinking water samples containing natural ion matrices. EDTA-2NA 0.01 N was found to be a better elution agent than HCl 0.1 M for the nanocomposite regeneration. After five adsorption/desorption cycles using EDTA-2NA 0.01 N, more than 84% of the adsorbed Pb(ii) was still desorbed in 30 min. Capturing sub-ppm initial concentrations of Pb(ii) and the capability to selectively remove lead from drinking water samples make the Fe3O4@DHAQ_GO nanocomposite practically convenient for water treatment purposes. High adsorption capacity and facile chemical synthesis route are the other advancements.

| S-EPMC9078188 | biostudies-literature

Physical Adsorption of Graphene Oxide onto Polymer Latexes and Characterization of the Resulting Nanocomposite Particles.

Project description:Polymer/graphene oxide (GO) nanocomposite particles were prepared via heteroflocculation between 140-220 nm cationic latex nanoparticles and anionic GO nanosheets in either acidic or basic conditions. It is demonstrated that nanocomposite particles can be formed using either poly(2-vinylpyridine)-b-poly(benzyl methacrylate) (P2VP-PBzMA) block copolymer nanoparticles prepared by reversible-addition chain-transfer (RAFT)-mediated polymerization-induced self-assembly (PISA), or poly(ethylene glycol)methacrylate (PEGMA)-stabilized P2VP latexes prepared by traditional emulsion polymerization. These two latexes are different morphologically as the P2VP-PBzMA block copolymer latexes have P2VP steric stabilizer chains in their corona, whereas the PEGMA-stabilized P2VP particles have a P2VP core and a nonionic steric stabilizer. Nevertheless, both the P2VP-PBzMA and PEGMA-stabilized P2VP latexes are cationic at low pH. Thus, the addition of GO to these latexes causes flocculation to occur immediately due to the opposite charges between the anionic GO nanosheets and cationic latexes. Control heteroflocculation experiments were conducted using anionic sterically stabilized poly(potassium 3-sulfopropyl methacrylate)-b-poly(benzyl methacrylate) (PKSPMA-PBzMA) and nonionic poly(benzyl methacrylate) (PBzMA) nanoparticles to demonstrate that polymer/GO nanocomposite particles were not formed. The degree of flocculation and the strength of electrostatic interaction between the cationic polymer latexes and GO were assessed using disc centrifuge photosedimentometry (DCP), transmission electron microscopy (TEM), and UV-visible spectrophotometry. These studies suggest that the optimal conditions for the formation of polymer/GO nanocomposite particles were GO contents between 10% and 20% w/w relative to latex, with the latexes containing P2VP in their corona having a stronger electrostatic attraction to the GO sheets.

| S-EPMC9281389 | biostudies-literature

Instantaneous Adsorption of Synthetic Dyes from an Aqueous Environment Using Kaolinite Nanotubes: Equilibrium and Thermodynamic Studies.

Project description:Innovative kaolinite nanotubes (KNTs) are synthesized utilizing a simple technique involving a sonication-induced exfoliation process, followed by chemical scrolling reactions. The KNTs as a material have high reactivity and promising surface area to be used in the purification of water from cationic dyes (safranin (SF) and malachite green (MG)) and anionic dyes (methyl orange (MO) and Congo red (CR)). The kinetic studies of the four dyes SF, MG, CR, and MO show an equilibration time interval of 240 min. The SF, MG, CR, and MO dyes' uptake reactions are in agreement with the kinetic behavior of the pseudo-first-order model and the equilibrium properties of the Langmuir model. Such modeling results, in addition to the Gaussian energies from the Dubinin-Radushkevich (D-R) model (SF (1.01 kJ/mol), MG (1.08 kJ/mol), CR (1.11 kJ/mol), and MO (1.65 kJ/mol)), hypothesize monolayer adsorption of the four dyes by physical reactions. The KNTs show theoretical q max values of 431.6, 489.9, 626.2, and 675.5 (mg/g) for SF, MG, CR, and MO, respectively. The thermodynamic examination of SF, MG, CR, and MO adsorption reactions using KNTs verifies their adsorption by exothermic and spontaneous reactions. The KNT adsorbents achieve promising adsorption results in the presence of different coexisting ions and show significant recyclability properties. Therefore, the production of KNTs from kaolinite shows a strong effect on inducing the textural, physicochemical, and adsorption properties of clay layers as well as their affinity for different species of synthetic dyes.

| S-EPMC7808155 | biostudies-literature

Cellulose nanocrystals/graphene oxide composite for the adsorption and removal of levofloxacin hydrochloride antibiotic from aqueous solution.

Project description:Residual antibiotics in water are often persistent organic pollutants. The purpose of this study was to prepare a cellulose nanocrystals/graphene oxide composite (CNCs-GO) with a three-dimensional structure for the removal of the antibiotic levofloxacin hydrochloride (Levo-HCl) in water by adsorption. The scanning electron microscope, Fourier transform infrared (FT-IR), energy-dispersive spectroscopy, X-ray photoelectron spectroscopy and other characterization methods were used to study the physical structure and chemical properties of the CNCs-GO. The three-dimensional structure of the composite material rendered a high surface area and electrostatic attraction, resulting in increased adsorption capacity of the CNCs-GO for Levo-HCl. Based on the Box-Behnken design, the effects of different factors on the removal of Levo-HCl by the CNCs-GO were explored. The composite material exhibited good antibiotic adsorption capacity, with a removal percentage exceeding 80.1% at an optimal pH of 4, the adsorbent dosage of 1.0 g l-1, initial pollutant concentration of 10.0 mg l-1 and contact time of 4 h. The adsorption isotherm was well fitted by the Sips model, and kinetics studies demonstrated that the adsorption process conformed to a quasi-second-order kinetics model. Consequently, the as-synthesized CNCs-GO demonstrates good potential for the effective removal of antibiotics such as levofloxacin hydrochloride from aqueous media.

| S-EPMC7657919 | biostudies-literature

Equilibrium, Thermodynamic, Reuse, and Selectivity Studies for the Bioadsorption of Lanthanum onto Sericin/Alginate/Poly(vinyl alcohol) Particles.

Project description:In a scenario of high demand, low availability, and high economic value, the recovery of rare-earth metals from wastewater is economically and environmentally attractive. Bioadsorption is a promising method as it offers simple design and operation. The aim of this study was to investigate lanthanum bioadsorption using a polymeric bioadsorbent of sericin/alginate/poly(vinyl alcohol)-based biocomposite. Batch system assays were performed to evaluate the equilibrium, thermodynamics, regeneration, and selectivity of bioadsorption. The maximum capture amount of lanthanum at equilibrium was 0.644 mmol/g at 328 K. The experimental equilibrium data were better fitted by Langmuir and Dubinin-Radushkevich isotherms. Ion exchange mechanism between calcium and lanthanum (2:3 ratio) was confirmed by bioadsorption isotherms. Thermodynamic quantities showed that the process of lanthanum bioadsorption was spontaneous (-17.586, -19.244, and -20.902 kJ/mol), endothermic (+15.372 kJ/mol), and governed by entropic changes (+110.543 J/mol·K). The reusability of particles was achieved using 0.1 mol/L HNO3/Ca(NO3)2 solution for up to five regeneration cycles. The bioadsorbent selectivity followed the order of lanthanum > cadmium > zinc > nickel. Additionally, characterization of the biocomposite prior to and post lanthanum bioadsorption showed low porosity (9.95 and 12.35%), low specific surface area (0.054 and 0.019 m2/g), amorphous character, and thermal stability at temperatures up to 473 K. This study shows that sericin/ alginate/poly(vinyl alcohol)-based biocomposites are effective in the removal and recovery of lanthanum from water.

| S-EPMC7922337 | biostudies-literature

Adsorption of 1,4-phenylene diisothiocyanate onto the graphene oxide sheets functionalized with polydiphenylamine in doped state.

Project description:Adsorption processes of 1,4-phenylene diisothiocyanate (PDITC) on two new platforms of the type graphene oxide (GO) sheets and GO layers functionalization with polydiphenylamine (PDPA) are studied by Raman scattering and photoluminescence (PL). An interaction in solid state phase of the two constituents, i.e. PDITC and GO sheets, and a deposition of PDITC onto the PDPA functionalized GO layers, respectively, by the drop casting method, were performed. In the first case, it is shown that interaction in solid state phase of GO with PDITC leads to an intercalation of the organic compound between GO sheets simultaneously with the appearance of the o-thiocarbamate groups, that induces: (i) an enhancement of the PDITC Raman lines situated in the 400-800 and 1000-1300 cm-1 spectral ranges, (ii) a change in the ratio between the relative intensities of the two Raman lines peaked at 1585 and 1602 cm-1 accompanied by an up-shift in the case of the second line and (iii) a down-shift of the PDTIC PL band from 502 to 491 nm. Using cyclic voltammetry, an electrochemical functionalization of the GO layers with PDPA doped with H3PMo12O40 heteropolyanions takes place, as demonstrated by Raman scattering and FTIR spectroscopy. The presence of the amine groups in the molecular structure of the doped PDPA functionalized GO layers induces a chemical adsorption of PDITC on this platform, when the thiourea groups appear simultaneously with o-thiocarbamate groups. A chemical mechanism is proposed to take place at the interface of the GO sheets and the doped PDPA functionalized GO layers, respectively, with PDITC.

| S-EPMC6700158 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data