Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Controlled Aloin Release from Crosslinked Polyacrylamide Hydrogels: Effects of Mesh Size, Electric Field Strength and a Conductive Polymer.

ABSTRACT: The aim of this paper is to investigate the effects of hydrogel mesh size, a conductive polymer, and electric field strength on controlled drug delivery phenomena using drug-loaded polyacrylamide hydrogels prepared at various crosslinking ratios both with and without a conductive polymer system. Poly(p-phenylene vinylene), PPV, as the model conductive polymer, was used to study its ability to control aloin released from aloin-doped poly(p-phenylene vinylene)/polyacrylamide hydrogel (aloin-doped PPV/PAAM). In the passive release, the diffusion of aloin from five aloin-doped PPV/PAAM hydrogel systems each was delayed ranging from during the first three hours to during the first 14 h due to the ionic interaction between the anionic drug and PPV. After the delayed periods, aloin could diffuse continuously into the buffer solution through the PAAM matrix. The amount of aloin released from the aloin-doped PPV/PAAM rose with increasing electric field strength as a result of the three mechanisms: the expansion of PPV chains inside the hydrogel, iontophoresis, and the electroporation of the matrix pore size, combined. Furthermore, the conductive polymer and the electric field could be used in combination to regulate the amount of release drug to a desired level, to control the release rate, and to switch the drug delivery on/off.

SUBMITTER: Niamlang S

PROVIDER: S-EPMC5452847 | biostudies-other | 2013 Oct

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Double-Crosslinked Polyurethane Acrylate for Highly Conductive and Stable Polymer Electrolyte.

Project description:High ionic conductivity and good stability are major factors that influence the use of polymer electrolytes in electrochemical storage and conversion devices. In this study, we present polyurethane acrylate (PUA) membranes having enhanced ionic conductivity and swelling stability by double crosslinking the polyurethane (PU) and polyacrylate (PA) compartments. The crosslinking agent concentration was varied to control their mechanical properties, swelling stability, and ionic conductivity. Under optimum conditions, the electrolyte uptake of the double-crosslinked PUA membranes without notable defects was 245%. The maximum ionic conductivity of these membranes reached 9.6 mS/cm, which was higher than those with respect to most of the previously reported PUA- or PU-based polymer electrolytes.

| S-EPMC7693480 | biostudies-literature

Tea eggs-inspired high-strength natural polymer hydrogels.

Project description:Natural polymer (NP) hydrogels are an irreplaceable class of biomaterials owing to their identified biosafety; however, the intrinsic poor mechanical strengths severely limit their applications as structural tissue engineering scaffolds. Inspired by the stiffening albumen gel of tea eggs, a traditional Chinese snack, high-strength NP hydrogels are constructed by simply soaking in aqueous solution of tea polyphenols (TP), an active ingredient extracted from tea. The TP-treated representative NP hydrogels exhibit considerably enhanced multifaceted mechanical properties with maximum 19-/30-, 8.4-, 6.1-, 72-fold increases in tensile/compressive strengths, Young's modulus, elongation at break and facture toughness, respectively, compared with pristine hydrogels, primarily due to the hydrogen bonding interactions between TP and NP chains. The TP-treated NP hydrogels can resist different large deformations, which cannot be achieved by their original species at all. In aqueous solution, the TP-treated NP hydrogels can still maintain robust mechanical performances, in spite of somewhat decline in strengths with release of TP, which just favorably affords increased water contents, antibacterial and antioxidant activities. GelMA-TP hydrogel is shown to facilitate wound healing in a full-thickness skin defect model. Importantly, the weak 3D printed GelMA scaffolds are significantly strengthened by TP treatment, broadening the possibility for customizing individualized bioscaffolds.

| S-EPMC7903155 | biostudies-literature

Electric field stimulates production of highly conductive microbial OmcZ nanowires.

Project description:Multifunctional living materials are attractive due to their powerful ability to self-repair and replicate. However, most natural materials lack electronic functionality. Here we show that an electric field, applied to electricity-producing Geobacter sulfurreducens biofilms, stimulates production of cytochrome OmcZ nanowires with 1,000-fold higher conductivity (30?S?cm-1) and threefold higher stiffness (1.5?GPa) than the cytochrome OmcS nanowires that are important in natural environments. Using chemical imaging-based multimodal nanospectroscopy, we correlate protein structure with function and observe pH-induced conformational switching to ?-sheets in individual nanowires, which increases their stiffness and conductivity by 100-fold due to enhanced ?-stacking of heme groups; this was further confirmed by computational modeling and bulk spectroscopic studies. These nanowires can transduce mechanical and chemical stimuli into electrical signals to perform sensing, synthesis and energy production. These findings of biologically produced, highly conductive protein nanowires may help to guide the development of seamless, bidirectional interfaces between biological and electronic systems.

| S-EPMC7502555 | biostudies-literature

Effects of channel size, wall wettability, and electric field strength on ion removal from water in nanochannels.

Project description:Molecular dynamics simulations are employed to estimate the effect of nanopore size, wall wettability, and the external field strength on successful ion removal from water solutions. It is demonstrated that the presence of ions, along with the additive effect of an external electric field, constitute a multivariate environment that affect fluidic interactions and facilitate, or block, ion drift to the walls. The potential energy is calculated across every channel case investigated, indicating possible ion localization, while electric field lines are presented, to reveal ion routing throughout the channel. The electric field strength is the dominant ion separation factor, while wall wettability strength, which characterizes if the walls are hydrophobic or hydrophilic has not been found to affect ion movement significantly at the scale studied here. Moreover, the diffusion coefficient values along the three dimensions are reported. Diffusion coefficients have shown a decreasing tendency as the external electric field increases, and do not seem to be affected by the degree of wall wettability at the scale investigated here.

| S-EPMC8755770 | biostudies-literature

Tuning and Predicting Mesh Size and Protein Release from Step Growth Hydrogels.

Project description:Hydrogel-based depots are of growing interest for release of biopharmaceuticals; however, a priori selection of hydrogel compositions that will retain proteins of interest and provide desired release profiles remains elusive. Toward addressing this, in this work, we have established a new tool for the facile assessment of protein release from hydrogels and applied it to evaluate the effectiveness of mesh size estimations on predicting protein retention or release. Poly(ethylene glycol) (PEG)-based hydrogel depots were formed by photoinitiated step growth polymerization of four-arm PEG functionalized with norbornene (PEG-norbornene, 4% w/w to 20% w/w, Mn ∼ 5 to 20 kDa) and different dithiol cross-linkers (PEG Mn ∼ 1.5 kDa or enzymatically degradable peptide), creating well-defined, robust materials with a range of mesh sizes estimated with Flory-Rehner or rubber elasticity theory (∼5 to 15 nm). A cocktail of different model proteins was released from compositions of interest, and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) was used to facilely and quantitatively analyze temporal release profiles. Mesh size was predictive of retention of relatively large proteins and release of relatively small proteins. Proteins with diameters comparable to the mesh size, which is often the case for growth factors, were released by hindered diffusion and required experimental assessment of retention and release. With this knowledge, hydrogels were designed for the controlled release of a therapeutically relevant growth factor, PDGF-BB.

| S-EPMC6699171 | biostudies-literature

Electric field-driven building blocks for introducing multiple gradients to hydrogels.

Project description:Gradient biomaterials are considered as preferable matrices for tissue engineering due to better simulation of native tissues. The introduction of gradient cues usually needs special equipment and complex process but is only effective to limited biomaterials. Incorporation of multiple gradients in the hydrogels remains challenges. Here, beta-sheet rich silk nanofibers (BSNF) were used as building blocks to introduce multiple gradients into different hydrogel systems through the joint action of crosslinking and electric field. The blocks migrated to the anode along the electric field and gradually stagnated due to the solution-hydrogel transition of the systems, finally achieving gradient distribution of the blocks in the formed hydrogels. The gradient distribution of the blocks could be tuned easily through changing different factors such as solution viscosity, which resulted in highly tunable gradient of mechanical cues. The blocks were also aligned under the electric field, endowing orientation gradient simultaneously. Different cargos could be loaded on the blocks and form gradient cues through the same crosslinking-electric field strategy. The building blocks could be introduced to various hydrogels such as Gelatin and NIPAM, indicating the universality. Complex niches with multiple gradient cues could be achieved through the strategy. Silk-based hydrogels with suitable mechanical gradients were fabricated to control the osteogenesis and chondrogenesis. Chondrogenic-osteogenic gradient transition was obtained, which stimulated the ectopic osteochondral tissue regeneration in vivo. The versatility and highly controllability of the strategy as well as multifunction of the building blocks reveal the applicability in complex tissue engineering and various interfacial tissues.

| S-EPMC7093350 | biostudies-literature

Control of Mesh Size and Modulus by Kinetically Dependent Cross-Linking in Hydrogels.

Project description:Kinetically controlled cross-linking processes produce mechanically distinguishable hydrogels using identical precursor chemistry. The oxime ligation demonstrates tunable reaction kinetics with pH and buffer strength, which induce changes in the structural features of hydrogels and determine their mechanical properties. Small-angle neutron scattering and swelling studies provide an insight into how structural properties correlate with mechanical properties for this hydrogel system.

| S-EPMC5951290 | biostudies-literature

Effect of ionic strength on shear-thinning nanoclay-polymer composite hydrogels.

Project description:Nanoclay-polymer shear-thinning composites are designed for a broad range of biomedical applications, including tissue engineering, drug delivery, and additive biomanufacturing. Despite the advances in clay-polymer injectable nanocomposites, colloidal properties of layered silicates are not fully considered in evaluating the in vitro performance of shear-thinning biomaterials (STBs). Here, as a model system, we investigate the effect of ions on the rheological properties and injectability of nanoclay-gelatin hydrogels to understand their behavior when prepared in physiological media. In particular, we study the effect of sodium chloride (NaCl) and calcium chloride (CaCl2), common salts in phosphate buffered saline (PBS) and cell culture media (e.g., Dulbecco's Modified Eagle's Medium, DMEM), on the structural organization of nanoclay (LAPONITE® XLG-XR, a hydrous lithium magnesium sodium silicate)-polymer composites, responsible for the shear-thinning properties and injectability of STBs. We show that the formation of nanoclay-polymer aggregates due to the ion-induced shrinkage of the diffuse double layer and eventually the liquid-solid phase separation decrease the resistance of STB against elastic deformation, decreasing the yield stress. Accordingly, the stress corresponding to the onset of structural breakdown (yield zone) is regulated by the ion type and concentration. These results are independent of the STB composition and can directly be translated into the physiological conditions. The exfoliated nanoclay undergoes visually undetectable aggregation upon mixing with gelatin in physiological media, resulting in heterogeneous hydrogels that phase separate under stress. This work provides fundamental insights into nanoclay-polymer interactions in physiological environments, paving the way for designing clay-based injectable biomaterials.

| S-EPMC6085890 | biostudies-literature

Distortion-free measurement of electric field strength with a MEMS sensor.

Project description:Small-scale and distortion-free measurement of electric fields is crucial for applications such as surveying atmospheric electrostatic fields, lightning research, and safeguarding areas close to high-voltage power lines. A variety of measurement systems exist, the most common of which are field mills, which work by picking up the differential voltage of the measurement electrodes while periodically shielding them with a grounded electrode. However, all current approaches are either bulky, suffer from a strong temperature dependency, or severely distort the electric field requiring a well-defined surrounding and complex calibration procedures. Here we show that microelectromechanical system (MEMS) devices can be used to measure electric field strength without significant field distortion. The purely passive MEMS devices exploit the effect of electrostatic induction, which is used to generate internal forces that are converted into an optically tracked mechanical displacement of a spring-suspended seismic mass. The devices exhibit resolutions on the order of [Formula: see text] with a measurement range of up to tens of kilovolt per metre in the quasi-static regime (? 300 Hz).We also show that it should be possible to achieve resolutions of around [Formula: see text] by fine-tuning of the sensor embodiment. These MEMS devices are compact and could easily be mass produced for wide application.

| S-EPMC5824978 | biostudies-literature

Preparation of conductive self-healing hydrogels <i>via</i> an interpenetrating polymer network method.

Project description:Conductive self-healing hydrogels and related soft sensor devices are gaining extensive attention from academia to industry because of their impacts on the lifetime and ergonomic design of artificial skins and soft robotics, as well as health monitoring systems. However, so far the development of such a material has been limited considering performance and availability. In this work, we developed composite hydrogels of acrylamide, polyacrylamide, dialdehyde-functionalized poly(ethylene glycol) and conductive carbon black through an interpenetrating polymer network strategy. After optimizing the composition ratio, the resultant hydrogel exhibited self-healing reversibility mechanically and electrically when cut and self-healed. We used 1H NMR and FT-IR spectroscopy to determine the self-healing mechanism of the system, thus demonstrating that the cooperative effect of the dynamic covalent and noncovalent interactions contributes to the self-healing capability of the gel. Rheology, scanning electron microscopy and light-emitting diode circuits were carried out to examine its macroscopic and microscopic properties, making it possible to apply in soft and conformable electronics.

| S-EPMC8694894 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data