Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Advanced Ceramics from Preceramic Polymers Modified at the Nano-Scale: A Review.

ABSTRACT: Preceramic polymers, i.e., polymers that are converted into ceramics upon heat treatment, have been successfully used for almost 40 years to give advanced ceramics, especially belonging to the ternary SiCO and SiCN systems or to the quaternary SiBCN system. One of their main advantages is the possibility of combining the shaping and synthesis of ceramics: components can be shaped at the precursor stage by conventional plastic-forming techniques, such as spinning, blowing, injection molding, warm pressing and resin transfer molding, and then converted into ceramics by treatments typically above 800 °C. The extension of the approach to a wider range of ceramic compositions and applications, both structural and thermo-structural (refractory components, thermal barrier coatings) or functional (bioactive ceramics, luminescent materials), mainly relies on modifications of the polymers at the nano-scale, i.e., on the introduction of nano-sized fillers and/or chemical additives, leading to nano-structured ceramic components upon thermal conversion. Fillers and additives may react with the main ceramic residue of the polymer, leading to ceramics of significant engineering interest (such as silicates and SiAlONs), or cause the formation of secondary phases, significantly affecting the functionalities of the polymer-derived matrix.

SUBMITTER: Bernardo E

PROVIDER: S-EPMC5453254 | biostudies-other | 2014 Mar

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Mono or polycrystalline alumina-modified hybrid ceramics.

Project description:This study evaluated the effect of addition of alumina particles (polycrystalline or monocrystalline), with or without silica coating, on the optical and mechanical properties of a porcelain.Groups tested were: control (C), polycrystalline alumina (PA), polycrystalline alumina-silica (PAS), monocrystalline alumina (MA), monocrystalline alumina-silica (MAS). Polycrystalline alumina powder was synthesized using a polymeric precursor method; a commercially available monocrystalline alumina powder (sapphire) was acquired. Silica coating was obtained by immersing alumina powders in a tetraethylorthosilicate solution, followed by heat-treatment. Electrostatic stable suspension method was used to ensure homogenous dispersion of the alumina particles within the porcelain powder. The ceramic specimens were obtained by heat-pressing. Microstructure, translucency parameter, contrast ratio, opalescence index, porosity, biaxial flexural strength, roughness, and elastic constants were characterized.A better interaction between glass matrix and silica coated crystalline particles is suggested in some analyses, yet further investigation is needed to confirm it. The materials did not present significant differences in biaxial flexural strength, due to the presence of higher porosity in the groups with alumina addition. Elastic modulus was higher for MA and MAS groups. Also, these were the groups with optical qualities and roughness closer to control. The PA and PAS groups were considerably more opaque as well as rougher.Porcelains with addition of monocrystalline particles presented superior esthetic qualities compared to those with polycrystalline particles. In order to eliminate the porosity in the ceramic materials investigated herein, processing parameters need to be optimized as well as different glass frites should be tested.

| S-EPMC4764382 | biostudies-literature

Self-Growth of Centimeter-Scale Single Crystals by Normal Sintering Process in Modified Potassium Sodium Niobate Ceramics.

Project description:In this manuscript, an interesting phenomenon is reported. That is the self-growth of single crystals in Pb-free piezoelectric ceramics. These crystals are several centimeters in size. They are grown without any seed addition through a normal sintering process in modified potassium sodium niobate ceramics. It has been achieved by the composition designed to compensate the Na(+) loss which occurs during the liquid phase sintering. The composition of the crystals is (K0.4925Na(0.4925-x)Ba(0.015+x/2))Nb(0.995+x)O3 [x is determined by the Na(+) loss, due to Na2O volatilization]. These crystals have high piezoelectric voltage coefficients (g33, 131 10(-3)Vm/N), indicating that they are good candidates for piezoelectric sensors and energy harvesting devices. We hope that this report can offer the opportunity for many researchers to have an interest in these crystals.

| S-EPMC4668382 | biostudies-literature

Scale-Dependent Dielectric Properties in BaZr0.05Ti0.95O3 Ceramics.

Project description:In the present work, BaZr0.05Ti0.95O3 ceramics with grain sizes between 0.45 and 135 µm were prepared by solid-state reaction and classical sintering. The effect of grain size on dielectric properties was systematically explored, and it was found that dielectric permittivity reaches a maximum value for grain sizes between 1.5 and 10 µm and then rapidly drops for larger grain sizes. A numerical finite element method was employed to eliminate the effect of porosity on the effective values of permittivity. The results indicate that it is possible to have a critical size in slightly doped barium titanate ceramics with enhanced functional properties for a grain size between 1.5 and 10 µm.

| S-EPMC7579612 | biostudies-literature

Heterogeneity Challenges in Multiple-Element-Modified Lead-Free Piezoelectric Ceramics.

Project description:We report on a heterogeneity study, down to the atomic scale, on a representative multiple-element-modified ceramic based on potassium sodium niobate (KNN): 0.95(Na0.49K0.49Li0.02)(Nb0.8Ta0.2)O3-0.05CaZrO3 with 2 wt % MnO2. We show that different routes for incorporating the MnO2 (either before or after the calcination step) affect the phase composition and finally the functionality of the material. According to X-ray diffraction and scanning electron microscopy analyses, the ceramics consist of orthorhombic and tetragonal perovskite phases together with a small amount of Mn-rich secondary phase. The addition of MnO2 after the calcination results in better piezoelectric properties, corresponding to a ratio between the orthorhombic and tetragonal perovskite phases that is closer to unity. We also show, using microscopy techniques combined with analytical tools, that Zr-rich, Ta-rich and Mn-rich segregations are present on the nano and atomic levels. With this multi-scale analysis approach, we demonstrate that the functional properties are sensitive to minor modifications in the synthesis route, and consequently to different material properties on all scales. We believe that detecting and learning how to control these modifications will be a step forward in overcoming the irreproducibility problems with KNN-based materials.

| S-EPMC6947271 | biostudies-literature

Glass-Ceramics in Dentistry: A Review.

Project description:In this review, we first briefly introduce the general knowledge of glass-ceramics, including the discovery and development, the application, the microstructure, and the manufacturing of glass-ceramics. Second, the review presents a detailed description of glass-ceramics in dentistry. In this part, the history, property requirements, and manufacturing techniques of dental glass-ceramics are reviewed. The review provided a brief description of the most prevalent clinically used examples of dental glass-ceramics, namely, mica, leucite, and lithium disilicate glass-ceramics. In addition, we also introduce the newly developed ZrO2-SiO2 nanocrystalline glass-ceramics that show great potential as a new generation of dental glass-ceramics. Traditional strengthening mechanisms of glass-ceramics, including interlocking, ZrO2-reinforced, and thermal residual stress effects, are discussed. Finally, a perspective and outlook for future directions in developing new dental glass-ceramics is provided to offer inspiration to the dental materials community.

| S-EPMC7084775 | biostudies-literature

Dependences of microstructure on electromagnetic interference shielding properties of nano-layered Ti3AlC2 ceramics.

Project description:The microstructure dependent electromagnetic interference (EMI) shielding properties of nano-layered Ti3AlC2 ceramics were presented in this study by comparing the shielding properties of various Ti3AlC2 ceramics with distinct microstructures. Results indicate that Ti3AlC2 ceramics with dense microstructure and coarse grains are more favourable for superior EMI shielding efficiency. High EMI shielding effectiveness over 40?dB at the whole Ku-band frequency range was achieved in Ti3AlC2 ceramics by microstructure optimization, and the high shielding effectiveness were well maintained up to 600?°C. A further investigation reveals that only the absorption loss displays variations upon modifying microstructure by allowing more extensive multiple reflections in coarse layered grains. Moreover, the absorption loss of Ti3AlC2 was found to be much higher than those of highly conductive TiC ceramics without layered structure. These results demonstrate that nano-layered MAX phase ceramics are promising candidates of high-temperature structural EMI shielding materials and provide insightful suggestions for achieving high EMI shielding efficiency in other ceramic-based shielding materials.

| S-EPMC5962584 | biostudies-literature

Exploring Borate-Modified Calcium Phosphate Ceramics: Antimicrobial Potential and Cytocompatibility Assessment.

Project description:Addressing periprosthetic infections, which present significant healing challenges that often require revision surgeries, necessitates the development of novel antibacterial materials and implants. Current research focuses on creating materials that hinder bacterial adhesion, colonization, and proliferation in surrounding tissues. Boron (B)-containing compounds are known for their antibacterial properties and potential in bone metabolism for regenerative medicine. In this study, we synthesized B-containing tricalcium phosphate (0.3B-TCP) with 1.1 wt.% B content via precipitation from aqueous solutions and sintering at 1100 °C. X-ray diffraction confirmed the ceramic's primary crystalline phase as β-TCP, with B evenly distributed according to energy-dispersive spectroscopy data. Electron paramagnetic resonance (EPR) data verified stable paramagnetic borate anions, indicating successful BO33- substitution for phosphate groups. The microstructural properties of 0.3B-TCP ceramic were assessed before and after soaking in a saline solution. Its bending strength was approximately 30 MPa, and its porosity was about 33%. 0.3B-TCP ceramic demonstrated significant antimicrobial efficacy against various bacterial strains and a fungus. Cytotoxicity evaluation using equine adipose tissue-derived mesenchymal stem cells and osteogenic differentiation assessment were conducted. The combination of antibacterial efficacy and good cytocompatibility suggests 0.3B-TCP ceramic as a promising bone substitute material.

| S-EPMC10973998 | biostudies-literature

Magnetotransport on the nano scale.

Project description:Transport experiments in strong magnetic fields show a variety of fascinating phenomena like the quantum Hall effect, weak localization or the giant magnetoresistance. Often they originate from the atomic-scale structure inaccessible to macroscopic magnetotransport experiments. To connect spatial information with transport properties, various advanced scanning probe methods have been developed. Capable of ultimate spatial resolution, scanning tunnelling potentiometry has been used to determine the resistance of atomic-scale defects such as steps and interfaces. Here we combine this technique with magnetic fields and thus transfer magnetotransport experiments to the atomic scale. Monitoring the local voltage drop in epitaxial graphene, we show how the magnetic field controls the electric field components. We find that scattering processes at localized defects are independent of the strong magnetic field while monolayer and bilayer graphene sheets show a locally varying conductivity and charge carrier concentration differing from the macroscopic average.

| S-EPMC5418608 | biostudies-literature

Platinized Graphene/ceramics Nano-sandwiched Architectures and Electrodes with Outstanding Performance for PEM Fuel Cells.

Project description:For the first time a novel oxygen reduction catalyst with a 3D platinized graphene/nano-ceramic sandwiched architecture is successfully prepared by an unusual method. Herein the specific gravity of graphene nanosheets (GNS) is tailored by platinizing graphene in advance to shorten the difference in the specific gravity between carbon and SiC materials, and then nano-SiC is well intercalated into GNS interlayers. This nano-architecture with highly dispersed Pt nanoparticles exhibits a very high oxygen reduction reaction (ORR) activity and polymer electrolyte membrane (PEM) fuel cell performance. The mass activity of half cells is 1.6 times of that of the GNS supported Pt, and 2.4 times that of the commercial Pt/C catalyst, respectively. Moreover, after an accelerated stress test our catalyst shows a predominantly electrochemical stability compared with benchmarks. Further fuel cell tests show a maximum power density as high as 747?mW/cm(2) at low Pt loading, which is more than 2 times higher than that of fuel cells with the pristine graphene electrode.

| S-EPMC4995351 | biostudies-literature

A comparative study of nano-fillers to improve toughness and modulus of polymer-derived ceramics.

Project description:Brittleness is a major limitation of polymer-derived ceramics (PDCs). Different concentrations of three nanofillers (carbon nanotubes, Si3N4 and Al2O3 nanoparticles) were evaluated to improve both toughness and modulus of a commercial polysilazane (PSZ) PDC. The PSZs were thermally cross-linked and pyrolyzed under isostatic pressure in nitrogen. A combination of mechanical, chemical, density, and microscopy characterizations was used to determine the effects of these fillers. Si3N4 and Al2O3 nanoparticles (that were found to be active fillers) were more effective than nanotubes and improved the elastic modulus, hardness, and fracture toughness (JIC) of the PDC by ~ 1.5 ×, ~ 3 ×, and ~ 2.5 ×, respectively. Nanotubes were also effective in maintaining the integrity of the samples during pyrolysis. The modulus and hardness of PDCs correlated positively with their apparent density; this can provide a fast way to assess future PDCs. The improvement in fracture toughness was attributed to crack deflection and bridging observed in the micro-indentation cracks in the modified PDCs. The specific toughness of the modified PDCs was 4 × higher than that of high-purity alumina, and its specific modulus reached that of commercially available technical ceramics. These PDCs can also easily take different shapes and therefore are of interest in protective armor, propulsion, thermal protection, device packaging and biomaterial systems.

| S-EPMC7997883 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data