Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Mechanical and Permeability Characteristics of Latex-Modified Pre-Packed Pavement Repair Concrete as a Function of the Rapid-Set Binder Content.

ABSTRACT: We evaluated the strength and durability characteristics of latex-polymer-modified, pre-packed pavement repair concrete (LMPPRC) with a rapid-set binder. The rapid-set binder was a mixture of rapid-set cement and silica sand, where the fluidity was controlled using a latex polymer. The resulting mix exhibited a compressive strength of ¥21 MPa and a flexural strength of ¥3.5 MPa after 4 h of curing (i.e., the traffic opening term for emergency repairs of pavement). The ratio of latex polymer to rapid-set binder material was varied through 0.40, 0.33, 0.29, and 0.25. Mechanical characterization revealed that the mechanical performance, permeability, and impact resistance increased as the ratio of latex polymer to rapid-set binder decreased. The mixture exhibited a compressive strength of ¥21 MPa after 4 h when the ratio of latex polymer to rapid-set binder material was ¤0.29. The mixture exhibited a flexural strength of ¥3.5 MPa after 4 h when the ratio of latex polymer to rapid-set binder material was ¤0.33. The permeability resistance to chloride ions satisfied 2000 C after 7 days of curing for all ratios. The ratio of latex polymer to rapid-set binder material that satisfied all conditions for emergency pavement repair was ¤0.29.

SUBMITTER: Han JW

PROVIDER: S-EPMC5455370 | biostudies-other | 2015 Oct

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

The Effects of Bituminous Binder on the Performance of Gussasphalt Concrete for Bridge Deck Pavement.

Project description:As bituminous binders greatly influence the engineering performance of gussasphalt concrete for bridge deck pavement, selecting appropriate bitumen is a critical procedure for mixture design. In this study, five different combinations of bituminous binder for potential use in the "Hong Kong-Zhuhai-Macao Bridge" project were prepared and tested. To meet the strict requirements of quality control, a new Guss-Mastic Asphalt (GMA) system was developed. Three key indices, Lueer fluidity, impact toughness, and dynamic stability, were used for GMA design and construction quality control. The test results show that the fluidity of the GMA mixtures was affected by the shear thinning phenomenon. After mixing for three hours, the Lueer value of all GMA mixtures met the requirements of pouring construction. Moreover, it was found that the influence of mixing time on GMA with styrene butadiene styrene (SBS) modified bitumen was different to other prepared mixtures. This difference is ascribed to the degradation of SBS during the blending process at an elevated temperature. Finally, the blended bitumen (30% Pen60/70 + 70% Trinidad lake asphalt (TLA)) was applied to the project of the Hong Kong-Zhuhai-Macao Bridge.

| S-EPMC7013826 | biostudies-literature

Experimental Study on the Permeability of SAP Modified Concrete.

Project description:To study the permeability of superabsorbent polymer (SAP) modified concrete and the effect of internal pore characteristics on the permeability of concrete specimens, the results of the water penetration under pressure test, the mercury intrusion porosimetry (MIP) test, and scanning electron microscopy (SEM) of SAP concrete were obtained and analyzed. The research shows that the addition of an appropriate amount of SAP can effectively improve the anti-permeability performance of concrete. After adding 0.2~0.6% SAP of cement quality to concrete, the penetration height value was reduced by 35~45%, the porosity was increased by 21-95%, and the tortuosity is increased by 14-15%, and all indicators show regular changes with the increase in SAP usage. Adding SAP to concrete changes the internal connection state of concrete, thereby further improving its impermeability by reducing the capillary pressure and changing the shape of the pores. The liquid permeation resistance is increased by the "threshold effect" inside concrete; this "threshold effect" is caused by the addition of SAP.

| S-EPMC7435898 | biostudies-literature

A new fatigue damage model for pavement concrete beams bearing multi-level bending loads.

Project description:MTS-810 material testing machine and acoustic emission signal analyzer were adopted to explore the mechanical behavior of concrete beams broken by the static load and the nonlinear cumulative damage law of concrete beams broken by fatigue bending from single-stage loading. Then, by introducing the Ramesh Talreja's Damage Criterion, the damage rule of single-stage loading was extended to the damage accumulation rule under multi-stage loading, and the results were verified by the results of two-stage and three-stage fatigue loading tests. Two main conclusions are achieved: first, affected by four-point bending load, the fatigue life of the concrete specimen is in line with the law of the two-parameter Weibull distribution, namely the higher the stress level is, the shorter the fatigue life is. Second, an obvious nonlinear relationship was discovered in the damage of concrete. The model deduced in this paper and the Palmgren-Miner linear damage accumulation model were adopted to compare the test results of flexural fatigue under single, two and three stage loads. The calculation results of this model were more reliable.

| S-EPMC8341528 | biostudies-literature

The Design and Material Characterization of Reclaimed Asphalt Pavement Enriched Concrete for Construction Purposes.

Project description:Reclaimed asphalt pavement (RAP) is a valuable commodity originating during processes of road/highways rehabilitations, resurfacing in the cases of the revelation of underneath-placed layers. Removed material can be successfully recycled and utilized as a supplementing material for new hot asphalt mixes. However, its dosages are limited because of variations in properties of aged bitumen compared to fresh material and, thus, a significant amount of waste material is remaining as waste products. Nonetheless, this commodity may find usage in the construction industry that suffers from a shortage of high-quality and easily available aggregates. This work aimed to investigate the optimal substitution of mined natural aggregate with commonly available RAP in order to produce composites with the comparable mechanical performance of reference ordinary Portland concrete. The aggregate substitutions up to 100% with RAP have been studied with a combination of mechanical and analytical techniques. Obtained experimental data showed changes in the porous structure, mineralogy, and in the amount of formed cement-related hydration products that influenced the mechanical performance of produced composites. Composite with 10% of natural aggregate substitution with RAP has shown the strength class C16/20 after 28 days of water curing, according to the EN 206-1. Such innovative products could be utilized in the construction industry. The usage of waste RAP could contribute to preservation of our environment for future generations.

| S-EPMC7663929 | biostudies-literature

Effect of Cereclor as Rejuvenator to Enhance the Aging Resistance of Reclaimed Asphalt Pavement Binder.

Project description:Asphalt is the most commonly used material for pavement construction around the world, and therefore, it is vital to acquaint a practice that restores the reclaimed asphalt pavement (RAP) binder properties to the required level of performance by adding proper rejuvenators. However, a rejuvenator may perform better in the early stages of its application but may not necessarily perform better in the long run. The aim of this study is to assess the rejuvenation effect on the aging resistance of RAP binder in long-life performance through applying artificial aging. In this study, base virgin binder of pen grade 60/70 and RAP binder rejuvenated with Cereclor were subjected to artificial aging to simulate the short- and long-term aging effects. Penetration, softening point, ductility, and viscosity; saturates, aromatics, resins, and asphaltene (SARA) fractionation; and Fourier-transform infrared (FTIR) spectroscopy, bending beam rheometer (BBR), and dynamic shear rheometer (DSR) tests were conducted to evaluate the potential improvements in various properties of RAP binder. The results indicated that the physical, fractional composition, rheological, and aging resistance of RAP binder improved through the rejuvenation mechanism. Therefore, the rejuvenator improved the chemical structure through re-balancing the constituents in the colloidal system, even after long-term re-aging, which proves it to be an aging-resistant binder. Furthermore, it has been concluded that Cereclor has substantial rejuvenation potential even after applying artificial aging, and it can be utilized in pavement recycling to achieve long-life performance. Furthermore, the results depict good correlations between the physical, rheological, and chemical parameters of virgin and RAP binder.

| S-EPMC7177406 | biostudies-literature

Recyclability of Concrete Pavement Incorporating High Volume of Fly Ash.

Project description:Recyclable concrete pavement was made from fly ash and crushed limestone sand and gravel as aggregates so that the concrete pavement could be recycled to raw materials for cement production. With the aim to use as much fly ash as possible for the sustainable development of society, while achieving adequate strength development, pavement concrete having a cement-replacement ratio of 40% by mass was experimentally investigated, focusing on the strength development at an early age. Limestone powder was added to improve the early strength; flexural strength at two days reached 3.5 MPa, the minimum strength for traffic service in Japan. The matured fly ash concrete made with a cement content of 200 kg/m3 achieved a flexural strength almost equal to that of the control concrete without fly ash. Additionally, Portland cement made from the tested fly ash concrete was tested to confirm recyclability, with the cement quality meeting the Japanese classification of ordinary Portland cement. Limestone-based recyclable fly ash concrete pavement is, thus, a preferred material in terms of sustainability.

| S-EPMC5455502 | biostudies-other

Study on the Permeability of Recycled Aggregate Pervious Concrete with Fibers.

Project description:Pervious concrete is considered to be porous concrete because of its pore structure and excellent permeability. In general, larger porosity will increase the permeability coefficient, but will significantly decrease the compressive strength. The effects of water-cement ratio, fiber types, and fiber content on the permeability coefficient, porosity, compressive strength, and flexural strength were investigated. The pore tortuosity of the pervious concrete was determined by volumetric analysis and two-dimensional cross-sectional image analysis. The concept and calculation method of porosity tortuosity were further proposed. Results show that the permeability coefficient of the pervious concrete is the most suitable with a water-cement ratio of 0.30; the water permeability of the pervious concrete is influenced by fiber diameter. The permeability coefficient of pervious concrete with polypropylene thick fiber (PPTF) is greater than that with copper coated steel fiber (CCF) and the polypropylene fiber (PPF). The permeability coefficient is related to tortuosity and porosity, but when porosity is the same, the permeability coefficient may be different. Finally, general relations between the permeability coefficient and porosity tortuosity are constructed.

| S-EPMC7013612 | biostudies-literature

Permeability of Concrete with Recycled Concrete Aggregate and Pozzolanic Materials under Stress.

Project description:The research reported herein studied the permeability of concrete containing recycled-concrete aggregate (RA), superfine phosphorous slag (PHS), and ground granulated blast-furnace slag (GGBS) with and without stress. Test results showed that the chloride diffusion coefficient of RA concrete (RAC) without external loads decreased with time, and the permeability of RAC is much lower than that of the reference concrete due to the on-going hydration and the pozzolanic reaction provided by the PHS and GGBS additives in the RAC mixture. The permeability of chloride under flexural load is much more sensitive than that under compressive load due to the differences in porosity and cracking pattern. At low compressive stress levels, the permeability of chloride decreased by the closing of pores and microcracks within RAC specimens. However, in a relatively short time the chloride diffusion coefficient and the chloride content increased rapidly with the increase of compressive stress when it exceeded a threshold stress level of approximate 35% of the ultimate compressive strength. Under flexural stress, the chloride transport capability increased with the increase of stress level and time. At high compressive and flexural stress levels, creep had a significant effect on the permeability of chloride in the RAC specimens due to the damage from the nucleation and propagation of microcracks over time. It is apparent that mortar cracking has more of a significant effect on the chloride transport in concrete than cracking in the interfacial transition zone (ITZ).

| S-EPMC5502916 | biostudies-other

Data for bottom ash and marble powder utilization as an alternative binder for sustainable concrete construction.

Project description:In today's world where the effects of global warming are intense, alternative approaches for a sustainable concrete sector are rapidly increasing. The partial replacement of waste materials, such as bottom ash and marble powder to cement, leads to a significant reduction in carbon dioxide emissions. The expected quality of materials to be used for the concrete sector is very important in terms of building safety. New building materials and binder materials offered as an alternative are often unable to meet this requirement due to existing standards. Therefore, the existing standards should be reviewed and alternative construction materials should be provided for the sector. This dataset would be beneficial for other researchers who design sustainable concrete. Although the data presented herein deals with pure paste, the authors believe that the data can be used for mix design in the concrete construction sector to reduce the cement amount for various civil engineering projects, from low to medium strength concrete applications. The data compiled herein were obtained from the fresh and hardened properties at 7, 28 and 56 days. Physico-mechanical characterization and sulphate resistance were analyzed for laboratory produced marble paste composites. The dataset described here is the pilot study of the "High-volume marble substitution in cement-paste: towards a better sustainability" [1] and "Novel coal bottom ash waste composites for sustainable construction" [2].

| S-EPMC6997663 | biostudies-literature

Investigating the pavement performance and aging resistance of modified bio-asphalt with nano-particles.

Project description:Bio-asphalt binders have been proposed as replacements for traditional asphalt binders, owing to advantages such as environmental protection, low costs, and abundant resources. However, a limitation of bio-asphalt binders is that their high-temperature performance is not suitable for pavement construction. In recent years, nano-particles have been widely used to improve the pavement performance of asphalt binders, particularly the high-temperature performance. Thus, the nano-particles might also provide a positive modified effect on the high-temperature performance of bio-asphalt binders. Based on this, five types of nano-particles including SiO2, CaCO3, TiO2, Fe2O3, and ZnO are selected for the preparation of modified bio-asphalt binders, using different dosages of nano-particles and bio-oil. The high- and low-temperature performances, aging resistance, workable performance, and water stability of the nano-modified bio-asphalt binders and mixtures are investigated. The results reveal that, the high-temperature performance and aging resistance of the nano-modified bio-asphalt binders and mixtures are improved at increased nano-particle dosages, whereas their low-temperature performance is slightly weakened. The effects of the nano-particles on the workable performance and water stability are insignificant.

| S-EPMC7473544 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data