Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Improved Resin-Zirconia Bonding by Room Temperature Hydrofluoric Acid Etching.

ABSTRACT: This in vitro study was conducted to evaluate the shear bond strength of "non-self-adhesive" resin to dental zirconia etched with hydrofluoric acid (HF) at room temperature and to compare it to that of air-abraded zirconia. Sintered zirconia plates were air-abraded (control) or etched with 10%, 20%, or 30% HF for either 5 or 30 min. After cleaning, the surfaces were characterized using various analytical techniques. Three resin cylinders (Duo-Link) were bonded to each treated plate. All bonded specimens were stored in water at 37 °C for 24 h, and then half of them were additionally thermocycled 5000 times prior to the shear bond-strength tests (n = 12). The formation of micro- and nano-porosities on the etched surfaces increased with increasing concentration and application time of the HF solution. The surface wettability of zirconia also increased with increasing surface roughness. Higher concentrations and longer application times of the HF solution produced higher bond-strength values. Infiltration of the resin into the micro- and nano-porosities was observed by scanning electron microscopy. This in vitro study suggests that HF slowly etches zirconia ceramic surfaces at room temperature, thereby improving the resin-zirconia bond strength by the formation of retentive sites.

SUBMITTER: Lee MH

PROVIDER: S-EPMC5455444 | biostudies-other | 2015 Mar

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Bonding of resin cement to zirconia with high pressure primer coating.

Project description:OBJECTIVES: To investigate the effect of air-drying pressure during ceramic primer coating on zirconia/resin bonding and the surface characteristics of the primed zirconia. METHODS: Two ceramic primers (Clearfil Ceramic Primer, CCP, Kuraray Medical Inc. and Z-Prime Plus, ZPP, Bisco Inc.) were applied on the surface of air-abraded zirconia (Katana zirconia, Noritake) and dried at 4 different air pressures (0.1-0.4 MPa). The primed zirconia ceramic specimens were bonded with a resin-based luting agent (SA Luting Cement, Kuraray). Micro-shear bond strengths of the bonded specimens were tested after 3 days of water storage or 5,000× thermocycling (n = 12). Failure modes of the fractured specimens were examined with scanning electron miscopy. The effects of air pressure on the thickness of the primer layers and the surface roughness (Sa) of primed zirconia were evaluated using spectroscopic ellipsometry (n = 6), optical profilometry and environmental scanning electron microscopy (ESEM) (n = 6), respectively. RESULTS: Clearfil Ceramic Primer air-dried at 0.3 and 0.4 MPa, yielding significantly higher µSBS than gentle air-drying subgroups (p < 0.05). Compared to vigorous drying conditions, Z-Prime Plus air-dried at 0.2 MPa exhibited significantly higher µSBS (p < 0.05). Increasing air-drying pressure reduced the film thickness for both primers. Profilometry measurements and ESEM showed rougher surfaces in the high pressure subgroups of CCP and intermediate pressure subgroup of ZPP. CONCLUSION: Air-drying pressure influences resin/zirconia bond strength and durability significantly. Higher air-drying pressure (0.3-0.4 MPa) for CCP and intermediate pressure (0.2 MPa) for ZPP are recommended to produce strong, durable bonds between resin cement and zirconia ceramics.

| S-EPMC4081122 | biostudies-literature

Influence of Hot-Etching Surface Treatment on Zirconia/Resin Shear Bond Strength.

Project description:This study was designed to evaluate the effect of hot-etching surface treatment on the shear bond strength between zirconia ceramics and two commercial resin cements. Ceramic cylinders (120 units; length: 2.5 mm; diameter: 4.7 mm) were randomly divided into 12 groups (n = 10) according to different surface treatments (blank control; airborne-particle-abrasion; hot-etching) and different resin cements (Panavia F2.0; Superbond C and B) and whether or not a thermal cycling fatigue test (5°-55° for 5000 cycles) was performed. Flat enamel surfaces, mounted in acrylic resin, were bonded to the zirconia discs (diameter: 4.7 mm). All specimens were subjected to shear bond strength testing using a universal testing machine with a crosshead speed of 1 mm/min. All data were statistically analyzed using one-way analysis of variance and multiple-comparison least significant difference tests (α = 0.05). Hot-etching treatment produced higher bond strengths than the other treatment with both resin cements. The shear bond strength of all groups significantly decreased after the thermal cycling test; except for the hot-etching group that was cemented with Panavia F2.0 (p < 0.05). Surface treatment of zirconia with hot-etching solution enhanced the surface roughness and bond strength between the zirconia and the resin cement.

| S-EPMC5458836 | biostudies-other

Laser-Milled Microslits Improve the Bonding Strength of Acrylic Resin to Zirconia Ceramics.

Project description:Heightened aesthetic considerations in modern dentistry have generated increased interest in metal-free "zirconia-supported dentures." The lifespan of the denture is largely determined by the strength of adhesion between zirconia and the acrylic resin. Thus, the effect on shear bond strength (SBS) was investigated by using an acrylic resin on two types of zirconia ceramics with differently sized microslits. Micromechanical reticular retention was created on the zirconia surface as the novel treatment (microslits (MS)), and air-abrasion was used as the control (CON). All samples were primed prior to acrylic resin polymerization. After the resin was cured, the SBS was tested. The obtained data were analyzed by using multivariate analysis of variance(? = 0.05). After the SBS test, the interface failure modes were observed by scanning electron microscopy. The MS exhibited significantly higher bond strength after thermal cycles (p < 0.05) than the CON. Nevertheless, statistically comparisons resulted in no significant effect of the differently sized microslits on SBS (p > 0.05). Additionally, MS (before thermal cycles: 34.8 ± 3.6 to 35.7 ± 4.0 MPa; after thermal cycles: 26.9 ± 3.1 to 32.6 ± 3.3 MPa) demonstrated greater SBS and bonding durability than that of CON (before thermal cycles: 17.3 ± 4.7 to 17.9 ± 5.8 MPa; after thermal cycles: 1.0 ± 0.3 to 1.7 ± 1.1 MPa), confirming that the micromechanical retention with laser-milled microslits was effective at enhancing the bonding strength and durability of the acrylic resin and zirconia. Polycrystalline zirconia-based ceramics are a newly accessible material for improving removable prosthodontic treatment, as the bond strength with acrylic resin can be greatly enhanced by laser milling.

| S-EPMC7240430 | biostudies-literature

Polymer Particles with a Low Glass Transition Temperature Containing Thermoset Resin Enable Powder Coatings at Room Temperature.

Project description:Epoxy-based powder coatings are an attractive alternative to solvent-borne coatings. Here, in-house synthesized low glass transition temperature (Tg) particles containing epoxy resin and polymethyl methacrylate formed coatings at room temperature upon impact with a surface. Suspension polymerization was used to prepare particles as a function of diglycidyl ether of bisphenol A (DGEBA) and methyl methacrylate ratios. Higher incorporation of DGEBA decreased the Tg to below ~20°C and eliminated the need to heat the particles and/or aluminum substrates to form coatings. Using an electrostatic powder coating apparatus, a ~70% particle deposition efficiency was achieved on aluminum substrates heated to 200°C. Whereas, at room temperature, high-speed single particle impact experiments proved that particle bonding occurred at a critical velocity of 438 m/s, comparable to commercial cold spray technologies. The in-house synthesized particles used in this study hold potential in traditional and emerging additive manufacturing applications.

| S-EPMC6342499 | biostudies-literature

H-Bonding Room Temperature Phosphorescence Materials via Facile Preparation for Water-Stimulated Photoluminescent Ink.

Project description:Pure organic room-temperature phosphorescence (RTP) materials built upon noncovalent interactions have attracted much attention because of their high efficiency, long lifetime, and stimulus-responsive behavior. However, there are limited reports of noncovalent RTP materials because of the lack of specific design principles and clear mechanisms. Here, we report on a noncovalent material prepared via facile grinding that can emit fluorescence and RTP emission differing from their components' photoluminescent behavior. Exciplex can be formed during the preparation process to act as the minimum emission unit. We found that H-bonds in the RTP system provide restriction to nonradiative transition but also enhance energy transformation and energy level degeneracy in the system. Moreover, water-stimulated photoluminescent ink is produced from the materials to achieve double-encryption application with good resolution.

| S-EPMC9571649 | biostudies-literature

Hydrogen Bonding to a Dinitrogen Complex at Room Temperature: Impacts on N<sub>2</sub> Activation.

Project description:We report an experimental and computational analysis of the effects of hydrogen bonding to a metal dinitrogen complex. A series of H-bond donors over a wide p Ka range (Δ 20) interact with the nitrogen unit of a ReI-(N2) complex at room temperature. Analysis by 15N NMR, IR spectroscopy, association equilibria, and DFT studies indicates that the H-bonding interaction polarizes and weakens the N-N bond. These results provide insight into the role of the secondary sphere residues in nitrogenase enzymes.

| S-EPMC6541522 | biostudies-literature

Ceria-Zirconia Particles Wrapped in a 2D Carbon Envelope: Improved Low-Temperature Oxygen Transfer and Oxidation Activity.

Project description:Engineering the interface between different components of heterogeneous catalysts at nanometer level can radically alter their performances. This is particularly true for ceria-based catalysts where the interactions are critical for obtaining materials with enhanced properties. Here we show that mechanical contact achieved by high-energy milling of CeO2-ZrO2 powders and carbon soot results in the formation of a core of oxide particles wrapped in a thin carbon envelope. This 2D nanoscale carbon arrangement greatly increases the number and quality of contact points between the oxide and carbon. Consequently, the temperatures of activation and transfer of the oxygen in ceria are shifted to exceptionally low temperatures and the soot combustion rate is boosted. The study confirms the importance of the redox behavior of ceria-zirconia particles in the mechanism of soot oxidation and shows that the organization of contact points at the nanoscale can significantly modify the reactivity resulting in unexpected properties and functionalities.

| S-EPMC4648039 | biostudies-literature

Lmo0688 (GmaR) regulon at room temperature

Project description:Microarray analyses comparing the transcriptional profile of wild-type EGDe relative to ∆lmo0688 (L. monocytogenes) during standing growth at RT in BHI broth. These analyses revealed that Lmo0688 is required for expression of flagellar motility genes during growth at RT. In this study, we identify an additional component of the molecular circuitry governing temperature-dependent flagellar gene expression. At low temperatures (30˚C and below), MogR repression activity is specifically inhibited by an anti-repressor, GmaR. We demonstrate that GmaR forms a stable complex with MogR, preventing MogR from binding its DNA target sites. GmaR anti-repression activity is temperature-dependent due to DegU-dependent transcriptional activation of gmaR at low temperatures. Thus, GmaR production represents the first committed step for flagella production in L. monocytogenes. Interestingly, GmaR also functions as a glycosyltransferase exhibiting O-linked N-acetylglucosamine transferase (OGT) activity for flagellin (FlaA). GmaR is the first OGT to be identified and characterized in prokaryotes. Unlike the well-characterized, highly conserved OGT regulatory protein in eukaryotes, the catalytic activity of GmaR is functionally separable from its anti-repression function. Keywords: EGDe vs ∆688, Temperature, Growth condition

2006-10-31 | GSE6032 | GEO

Pure Boric Acid Does Not Show Room-Temperature Phosphorescence (RTP).

Project description:Boric acid (BA) has been used as a transparent glass matrix for optical materials for over 100 years. However, recently, apparent room-temperature phosphorescence (RTP) from BA (crystalline and powder states) was reported (Zheng et al., Angew. Chem. Int. Ed. 2021, 60, 9500) when irradiated at 280 nm under ambient conditions. We suspected that RTP from their BA sample was induced by an unidentified impurity. Our experimental results show that pure BA synthesized from B(OMe)3 does not luminesce in the solid state when irradiated at 250-400 nm, while commercial BA indeed (faintly) luminesces. Our theoretical calculations show that neither individual BA molecules nor aggregates would absorb light at >175 nm, and we observe no absorption of solid pure BA experimentally at >200 nm. Therefore, it is not possible for pure BA to be excited at >250 nm even in the solid state. Thus, pure BA does not display RTP, whereas trace impurities can induce RTP.

| S-EPMC9305524 | biostudies-literature

Warm Water Versus Room Temperature Water Immersion Colonoscopy

Project description:Water immersion insertion has been documented to decrease procedure-related discomfort during colonoscopy. There was used warm water infusion for colonoscope insertion in most of the water immersion colonoscopy trials. The investigators have been using room temperature water (20-24°C) for water immersion and the investigators did not notice any drawback of it. In our opinion, it is simpler and cheaper option for water immersion colonoscopy and proof of its efficacy and safety could support the use of water immersion technique in routine practice. The primary endpoint is cecal intubation time and the investigators suppose that the use of warm water infusion does not shorten it significantly. Patient comfort during colonoscope insertion, water consumption, length of the scope while reaching the cecum, need for external compression, need for positioning of the patient and endoscopist´s difficulty with colonoscopy will be also assessed.

| 2124104 | ecrin-mdr-crc

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data