Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Preparation of LuAG Powders with Single Phase and Good Dispersion for Transparent Ceramics Using Co-Precipitation Method.

ABSTRACT: The synthesis of pure and well dispersed lutetium aluminum garnet (LuAG) powder is crucial and important for the preparation of LuAG transparent ceramics. In this paper, high purity and well dispersed LuAG powders have been synthesized via co-precipitation method with lutetium nitrate and aluminum nitrate as raw materials. Ammonium hydrogen carbonate (AHC) was used as the precipitant. The influence of aging time, pH value, and dripping speed on the prepared LuAG powders were investigated. It showed that long aging duration (>15 h) with high terminal pH value (>7.80) resulted in segregation of rhombus Lu precipitate and Al precipitate. By decreasing the initial pH value or accelerating the dripping speed, rhombus Lu precipitate was eliminated and pure LuAG nano powders were synthesized. High quality LuAG transparent ceramics with transmission >75% at 1064 nm were fabricated using these well dispersed nano LuAG powders.

SUBMITTER: Pan L

PROVIDER: S-EPMC5455486 | biostudies-other | 2015 Aug

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Co-Precipitation of YAG Powders for Transparent Materials: Effect of the Synthesis Parameters on Processing and Microstructure.

Project description:The fabrication of transparent polycrystalline Y₃Al₅O12 (YAG) is still a challenge, requiring the achievement of highly pure and fully dense, homogeneous materials. An important role is played by the powder characteristics: pure, fine and unagglomerated powders are essential for achieving full density and the required microstructural features. Keeping in mind these requirements, the aim of this work was to investigate the role of different synthesis parameters during co-precipitation, which is widely used to prepare YAG powders for transparent devices. The key role of the precipitant solution is here illustrated, by comparing the effect of aqueous ammonia (AA) versus ammonium hydrogen carbonate (AHC). This latter allowed the preparation of softly agglomerated powders, characterized by a very good sinterability. However, when AHC is used, attention should be paid to its concentration. By comparing the effect of two AHC precipitant solutions (at 0.5 M and 1.5 M, respectively), only the former one allowed the preparation of pure YAG powders, free from secondary phases. In this last condition, by using both chlorides and nitrates as YAG precursors, pressureless sintering at 1500-1600 °C/3 h gave rise to pure materials, highly dense and characterized by a fine and homogeneous microstructure.

| S-EPMC5456015 | biostudies-other

Preparation and Optical Properties of Infrared Transparent 3Y-TZP Ceramics.

Project description:In the present study, a tough tetragonal zirconia polycrystalline (Y-TZP) material was developed for use in high-speed infrared windows and domes. The influence of the preparation procedure and the microstructure on the material's optical properties was evaluated by SEM and FT-IR spectroscopy. It was revealed that a high transmittance up to 77% in the three- to five-micrometer IR region could be obtained when the sample was pre-sintered at 1225 °C and subjected to hot isostatic pressing (HIP) at 1275 °C for two hours. The infrared transmittance and emittance at elevated temperature were also examined. The in-line transmittance remained stable as the temperature increased to 427 °C, with degradation being observed only near the infrared cutoff edge. Additionally, the emittance property of 3Y-TZP ceramic at high temperature was found to be superior to those of sapphire and spinel. Overall, the results indicate that Y-TZP ceramic is a potential candidate for high-speed infrared windows and domes.

| S-EPMC5506950 | biostudies-other

Co-Dispersion Behavior of ZrB₂-SiC-B₄C-C Powders with Polyethyleneimine.

Project description:The aqueous dispersion behavior of ZrB₂, SiC powders with B₄C and C as sintering aids was investigated. Well co-dispersed suspension can be obtained in acidic solutions in presence of polyethyleneimine (PEI). The adsorption of PEI on the powder surface was measured by thermal gravimetric (TG) analysis. Rheological measurements displayed the effect of dispersant on the flow behavior of as-prepared slurries. An optimum condition was obtained with 1 wt % PEI. The viscosity of 40 vol % ZrB₂-SiC-B₄C-C (ZSBC) suspension at 100 s-1 was as low as 0.74 Pa·s, which was suitable for aqueous processing.

| S-EPMC5452644 | biostudies-other

Transparent non-cubic laser ceramics with fine microstructure.

Project description:Transparent polycrystalline ceramics with cubic crystal structure have played important roles in a wide variety of solid-state laser applications, whereas for non-cubic structures, single crystal only has been used. For further progress in optical technologies, effective materials beyond the current limitations are necessary. Here we report a new type of non-cubic ceramic laser material that overturns conventional common sense. It is hexagonal Nd-doped fluorapatite (Nd:FAP) ceramics with an optical quality comparable to single crystal while having random crystal orientation. It is composed of ultrafine grains with a loss coefficient of 0.18 cm-1 at a lasing wavelength of 1063 nm, and its laser oscillation was demonstrated. This is the first verification of lasing in randomly oriented non-cubic ceramics. Laser oscillation in the non-cubic ceramics was realized through both advanced liquid-phase nano-powder synthesis technology and highly controlled pulsed-current sintering techniques. Our findings should open new avenues for future solid-state laser and optical applications.

| S-EPMC6635367 | biostudies-literature

Improved Visible Emission from ZnO Nanoparticles Synthesized via the Co-Precipitation Method.

Project description:Since ZnO nanoparticles (NPs) possess a variety of intrinsic defects, they can provide a wide spectrum of visible emission, without adding any impurity or any doping atoms. They are attracting more and more interest as a material for light sources and energy downshifting systems. However, defect emission with a high luminescence quantum efficiency (PL QY) is difficult to obtain. Here, we present the co-precipitation synthesis parameters permitting to attain ZnO NPs with highly visible PL QYs. We found that the nature of zinc precursors and alkaline hydroxide (KOH or LiOH) used in this method affects the emission spectra and the PL QY of the as-grown ZnO NPs. LiOH is found to have an advantageous effect on the visible emission efficiency when added during the synthesis of the ZnO NPs. More precisely, LiOH permits to increase the emission efficiency in the visible up to 13%. We discuss the effects of the nanoparticle size, the morphology and the surface stabilization on the enhancement of the luminescent emission efficiency. Various spectral contributions to the luminescent emission were also examined, in order to achieve a control of the defect emission to increase its efficiency.

| S-EPMC10420257 | biostudies-literature

Micro Salting-Out Assisted Matrix Solid-Phase Dispersion: A Simple and Fast Sample Preparation Method for the Analysis of Bisphenol Contaminants in Bee Pollen.

Project description:In the present work, a novel sample preparation method, micro salting-out assisted matrix solid-phase dispersion (μ-SOA-MSPD), was developed for the determination of bisphenol A (BPA) and bisphenol B (BPB) contaminants in bee pollen. The proposed method was designed to combine two classical sample preparation methodologies, matrix solid-phase dispersion (MSPD) and homogenous liquid-liquid extraction (HLLE), to simplify and speed-up the preparation process. Parameters of μ-SOA-MSPD were systematically investigated, and results indicated the significant effect of salt and ACN-H2O extractant on the signal response of analytes. In addition, excellent clean-up ability in removing matrix components was observed when primary secondary amine (PSA) sorbent was introduced into the blending operation. The developed method was fully validated, and the limits of detection for BPA and BPB were 20 μg/kg and 30 μg/kg, respectively. Average recoveries and precisions were ranged from 83.03% to 94.64% and 1.76% to 5.45%, respectively. This is the first report on the analysis of bisphenol contaminants in bee pollen sample, and also on the combination of MSPD and HLLE. The present method might provide a new strategy for simple and fast sample preparation of solid and semi-solid samples.

| S-EPMC8074014 | biostudies-literature

Is precipitation a good metric for model performance?

Project description:Precipitation has often been used to gauge the performances of numerical weather and climate models, sometimes together with other variables such as temperature, humidity, geopotential, and clouds. Precipitation, however, is singular in that it can present a high spatial variability and probably the sharpest gradients amongst all meteorological fields. Moreover, its quantitative measurement is plagued with difficulties and there are even notable differences among different reference datasets. Several additional issues have yield to sometimes question its usefulness in model validation. This essay discusses the use of precipitation for model verification and validation, and the crucial role of highly precise and reliable satellite estimates, such as those from the core observatory of NASA's Global Precipitation Mission (GPM).

| S-EPMC6951255 | biostudies-literature

Novel sample preparation method for safe and rapid detection of Bacillus anthracis spores in environmental powders and nasal swabs.

Project description:Bacillus anthracis spores have been used as a biological weapon in the United States. We wanted to develop a safe, rapid method of sample preparation that provided safe DNA for the detection of spores in environmental and clinical specimens. Our method reproducibly detects B. anthracis in samples containing <10 spores.

| S-EPMC150283 | biostudies-literature

Synthesis and Characterization of High-Purity, High-Entropy Diboride Ceramic Powders by a Liquid Phase Method.

Project description:A nano-dual-phase powder with ultra-fine grain size was synthesized by the liquid precursor method at 1200 °C. A series of single-phase high-entropy ceramic powders ((Ti, Zr, Hf, Nb)B2, (Ti, Zr, Hf, Nb, Ta)B2, (Ti, Zr, Hf, Nb, Mo)B2, (Ti, Zr, Hf, Nb, Ta, Mo)B2) with high purity (C content less than 0.9 wt% and O content less than 0.7 wt%) and ultrafine (average grain sizes of 340-570 nm) were successfully synthesized at 1800 °C. The sample of (TiZrHfNbTa)B2 exhibited a hexagonal close-packed (HCP) structure, and the metal elements were uniformly distributed at the nanoscale, microscale, and macroscale. This method did not apply to the preparation of all high-entropy ceramic powders and was unfavorable for the formation of single-phase high-entropy borides when the size difference factor exceeded 3.9%. The present work provides a guide for the development of ceramic-based composites through precursor impregnation pyrolysis.

| S-EPMC10707663 | biostudies-literature

Preparation of Poly-(Methyl vinyl ether-co-maleic Anhydride) Nanoparticles by Solution-Enhanced Dispersion by Supercritical CO2

Project description:The supercritical CO2-based technologies have been widely used in the formation of drug and/or polymer particles for biomedical applications. In this study, nanoparticles of poly-(methyl vinyl ether-co-maleic anhydride) (PVM/MA) were successfully fabricated by a process of solution-enhanced dispersion by supercritical CO2 (SEDS). A 23 factorial experiment was designed to investigate and identify the significance of the processing parameters (concentration, flow and solvent/nonsolvent) for the surface morphology, particle size, and particle size distribution of the products. The effect of the concentration of PVM/MA was found to be dominant in the results regarding particle size. Decreasing the initial solution concentration of PVM/MA decreased the particle size significantly. After optimization, the resulting PVM/MA nanoparticles exhibited a good spherical shape, a smooth surface, and a narrow particle size distribution. Fourier transform infrared spectroscopy (FTIR) spectra demonstrated that the chemical composition of PVM/MA was not altered during the SEDS process and that the SEDS process was therefore a typical physical process. The absolute value of zeta potential of the obtained PVM/MA nanoparticles was larger than 40 mV, indicating the samples’ stability in aqueous suspension. Analysis of thermogravimetry-differential scanning calorimetry (TG-DSC) revealed that the effect of the SEDS process on the thermostability of PVM/MA was negligible. The results of gas chromatography (GC) analysis confirmed that the SEDS process could efficiently remove the organic residue.

| S-EPMC5449034 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data