Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Influence of Zeolite Coating on the Corrosion Resistance of AZ91D Magnesium Alloy.

ABSTRACT: The protective performance of zeolite coating on AZ91D magnesium alloy was evaluated using potentiodynamic polarisation and electrochemical impedance spectroscopy (EIS) in 0.1 M sodium chloride solution (NaCl). Electrical equivalent circuit (EEC) was developed based upon hypothetical corrosion mechanisms and simulated to correspond to the experimental data. The morphology and the chemical nature of the coating were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. Post corrosion morphologies of the zeolite coated and the uncoated AZ91D alloy were investigated using SEM. The corrosion resistance of the zeolite coated specimen was at least one order of magnitude higher than the uncoated specimen.

SUBMITTER: Banerjee PC

PROVIDER: S-EPMC5456170 | biostudies-other | 2014 Aug

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Mitigation of Corrosion on Magnesium Alloy by Predesigned Surface Corrosion.

Project description:Rapid corrosion of magnesium alloys is undesirable in structural and biomedical applications and a general way to control corrosion is to form a surface barrier layer isolating the bulk materials from the external environment. Herein, based on the insights gained from the anticorrosion behavior of corrosion products, a special way to mitigate aqueous corrosion is described. The concept is based on pre-corrosion by a hydrothermal treatment of Al-enriched Mg alloys in water. A uniform surface composed of an inner compact layer and top Mg-Al layered double hydroxide (LDH) microsheet is produced on a large area using a one-step process and excellent corrosion resistance is achieved in saline solutions. Moreover, inspired by the super-hydrophobic phenomenon in nature such as the lotus leaves effect, the orientation of the top microsheet layer is tailored by adjusting the hydrothermal temperature, time, and pH to produce a water-repellent surface after modification with fluorinated silane. As a result of the trapped air pockets in the microstructure, the super-hydrophobic surface with the Cassie state shows better corrosion resistance in the immersion tests. The results reveal an economical and environmentally friendly means to control and use the pre-corrosion products on magnesium alloys.

| S-EPMC4663789 | biostudies-literature

Effect of Ultrasonic Frequency on Structure and Corrosion Properties of Coating Formed on Magnesium Alloy via Plasma Electrolytic Oxidation.

Project description:This study explores the application of ultrasonic vibration during plasma electrolytic oxidation (PEO) to enhance the corrosion resistance of magnesium (Mg) alloy. To this end, three different ultrasonic frequencies of 0, 40, and 135 kHz were utilized during PEO. In the presence of ultrasonic waves, the formation of a uniform and dense oxide layer on Mg alloys is facilitated. This is achieved through plasma softening, acoustic streaming, and improved mass transport for successful deposition and continuous reforming of the oxide layer. The oxide layer exhibits superior protective properties against corrosive environments due to the increase in compactness. Increasing ultrasonic frequency from 40 to 135 kHz, however, suppresses the optimum growth of the oxide layer due to the occurrence of super-soft plasma swarms, which results in a low coating thickness. The integration of ultrasonic vibration with PEO presents a promising avenue for practical implementation in industries seeking to enhance the corrosion protection of Mg alloys, manipulating microstructures and composition.

| S-EPMC10419714 | biostudies-literature

Endowing magnesium with the corrosion-resistance property through cross-linking polymerized inorganic sol-gel coating.

Project description:The design of a highly adhesive, defect-free and low-temperature sol-gel coating for the protection of magnesium alloys is desirable yet challenging. In this study, a novel SiO2-based sol-gel coating is developed by a ring-opening addition reaction. Notably, the integration of individual sol clusters endows the sol-gel coating with a smooth and compact surface morphology, and eliminates the potential corrosion site of the low-temperature-prepared sol-gel coating. Besides, the as-obtained sol-gel coating exhibits excellent metallic adhesion nature. Most importantly, it increases the overall impedance modulus by 27 times than that of the conventional strategy and decreases the corrosion rate from 3.8 ± 0.5 mg cm-2 per day (commercial chromate conversion coating) to 0.5 ± 0.2 mg cm-2 per day.

| S-EPMC8694321 | biostudies-literature

Microstructure and Corrosion of Cast Magnesium Alloy ZK60 in NaCl Solution.

Project description:In this work, the effects of the microstructure and phase constitution of cast magnesium alloy ZK60 (Mg-5.8Zn-0.57Zr, element concentration in wt.%) on the corrosion behavior in aqueous NaCl (0.1 mol dm-3) were investigated by weight-loss measurements, hydrogen evolution tests, and electrochemical techniques. The alloy was found to be composed of ?-Mg matrix, with large second-phase particles of MgZn2 deposited along grain boundaries and a Zr-rich region in the central area of the grains. The large second-phase particles and the Zr-rich regions were more stable than the Mg matrix, resulting in a strong micro-galvanic effect. A filiform corrosion was found. It originated from the second-phase particles in the grain boundary regions in the early corrosion period. The filaments gradually occupied most areas of the alloy surface, and the general corrosion rate decreased significantly. Corrosion pits were developed under filaments. The pit growth rate decreased over time; however, it was about eight times larger than the general corrosion rate. A schematic model is presented to illustrate the corrosion mechanism.

| S-EPMC7504006 | biostudies-literature

Enhanced mechanical properties and increased corrosion resistance of a biodegradable magnesium alloy by plasma electrolytic oxidation (PEO).

Project description:We report the enhanced mechanical properties of AZ31 magnesium alloys by plasma electrolytic oxidation (PEO) coating in NaOH, Na2SiO3, KF and NaH2PO4·2H2O containing electrolytes. Mechanical properties including wear resistance, surface hardness and elastic modulus were increased for PEO-coated AZ31 Mg alloys (PEO-AZ31). DC polarization in Hank's solution indicating that the corrosion resistance significantly increased for PEO-coating in KF-contained electrolyte. Based on these results, the PEO coating method shows promising potential for use in biodegradable implant applications where tunable corrosion and mechanical properties are needed.

| S-EPMC5464743 | biostudies-literature

Improvement of AZ91 Alloy Corrosion Properties by Duplex NI-P Coating Deposition.

Project description:The corrosion behavior of duplex Ni-P coatings deposited on AZ91 magnesium alloy was studied. The electroless deposition process of duplex Ni-P coating consisted in the preparation of low-phosphorus Ni-P coating (5.7 wt.% of P), which served as a bond coating and high-phosphorus Ni-P coating (11.5 wt.% of P) deposited on it. The duplex Ni-P coatings with the thickness of 25, 50, 75 and 100 µm were deposited on AZ91 magnesium alloy. The electrochemical corrosion behavior of coated AZ91 magnesium alloy was investigated by electrochemical impedance spectroscopy and potentiodynamic polarization method in 0.1 M NaCl. Obtained results showed a significant improvement in the corrosion resistance of coated specimens when compared to uncoated AZ91 magnesium alloy. From the results of the immersion tests in 3.5 wt.% NaCl, 10% solution of HCl and NaOH and 5% neutral salt spray, a noticeable increase in the corrosion resistance with the increasing thickness of the Ni-P coating was observed.

| S-EPMC7142442 | biostudies-literature

Fabrication and Corrosion Resistance of a Superhydrophobic Ni-P/Ni3(NO3)2(OH)4 Multilayer Protective Coating on Magnesium Alloy.

Project description:A superhydrophobic multilayer coating with excellent corrosion resistance has been fabricated on an AZ61 magnesium alloy through electroless plating and hydrothermal treatment. The surface morphologies, chemical characteristics, wettabilities, and corrosion resistance of the multilayer coating were characterized and discussed. The results show that the electroless Ni-P coating on the magnesium alloy exhibits a nodular structure with micropores and lower corrosion resistance. However, a dense Ni3(NO3)2(OH)4 layer, a porous Ni3(NO3)2(OH)4 nanostructure layer, and a stearic absorbing layer are grown on the surface of the Ni-P coating with superhydrophobic characters and higher corrosion resistance after hydrothermal treatment. Furthermore, the water contact angle and corrosion resistance of the multilayer coating showed a trend of first increasing and then decreasing as the hydrothermal reaction time increases. The optimum hydrothermal reaction time is 15 h, and the multilayer coating prepared under this condition has the highest corrosion resistance and the highest contact angle. In addition, the protection mechanism of the multilayer coating is discussed, and the formation of the dense Ni3(NO3)2(OH)4 layer and the stearic absorbing layer effectively improved the corrosion resistance of the multilayer coating.

| S-EPMC7528178 | biostudies-literature

Graphene-Reinforced Zn-Ni Alloy Composite Coating on Iron Substrates by Pulsed Reverse Electrodeposition and Its High Corrosion Resistance.

Project description:In this paper, a novel kind of graphene (Gr)-reinforced Zn-Ni alloy composite coating is successfully prepared on an iron substrate by pulsed reverse electrodeposition. Hydrophilic graphene oxide (GO) is directly added to the electrolyte and reduced to Gr during coating. The experimental results reveal that (1) there is an optimal adding amount (about 0.4 g/L) of GO in the electrolyte for achieving the highest mechanical properties and corrosion resistance; (2) the composite coating shows grain refinement and a dense microstructure due to heterogeneous nucleation sites provided from the Gr sheets during electrodeposition; and (3) compared to the regular Zn-Ni coating, the composite coating exhibits many enhancements, including hardness increase by 2.3 times, elastic modulus increase by 39%, and corrosion rate decrease from 37.66 to 1.30 mils/annum. This process has advantages such as being simple, effective, well repeatable, economical, and supporting large-scale production and is expected to be widely applied in electronics, automobiles, marine engineering, and military industries.

| S-EPMC8173559 | biostudies-literature

Clinoenstatite/Tantalum Coating for Enhancement of Biocompatibility and Corrosion Protection of Mg Alloy.

Project description:Biodegradable Mg alloys have appeared as the most appealing metals for biomedical applications, particularly as temporary bone implants. However, issues regarding high corrosion rate and biocompatibility restrict their application. Hence, in the present work, nanostructured clinoenstatite (CLT, MgSiO3)/tantalum nitride (TaN) was deposited on the Mg-Ca-Zn alloy via electrophoretic deposition (EPD) along with physical vapor deposition (PVD) to improve the corrosion and biological characteristics of the Mg-Ca-Zn alloy. The TaN intermediate layer with bubble like morphology possessed a compact and homogenous structure with a thickness of about 950 nm while the thick CLT over-layer (~15 ?m) displayed a less compact structure containing nano-porosities as well as nanoparticles with spherical morphology. The electrochemical tests demonstrated that the as prepared CLT/TaN film is able to substantially increase the anticorrosion property of Mg-Ca-Zn bare alloy. Cytocompatibility outcomes indicated that formation of CLT and TaN on the Mg bare alloy surface enhanced cell viability, proliferation and growth, implying excellent biocompatibility. Taken together, the CLT/TaN coating exhibits appropriate characteristic including anticorrosion property and biocompatibility in order to employ in biomedical files.

| S-EPMC7353525 | biostudies-literature

Influence of Sulfate-Reducing Bacteria on the Corrosion Residual Strength of an AZ91D Magnesium Alloy.

Project description:In this paper, the corrosion residual strength of the AZ91D magnesium alloy in the presence of sulfate-reducing bacteria is studied. In the experiments, the chemical composition of corrosion film was analyzed by a scanning electron microscope with energy dispersive X-ray spectroscopy. In addition, a series of instruments, such as scanning electronic microscope, pH-meter and an AG-10TA materials test machine, were applied to test and record the morphology of the corrosion product, fracture texture and mechanical properties of the AZ91D magnesium alloy. The experiments show that the sulfate-reducing bacteria (SRB) play an important role in the corrosion process of the AZ91D magnesium alloy. Pitting corrosion was enhanced by sulfate-reducing bacteria. Corrosion pits are important defects that could lead to a significant stress concentration in the tensile process. As a result, sulfate-reducing bacteria influence the corrosion residual strength of the AZ91D magnesium alloy by accelerating pitting corrosion.

| S-EPMC5456009 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data