Browse
Submit Data
Databases
API
Help

Dataset Information

8 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

An In-Depth Investigation into the Physicochemical, Thermal, Microstructural, and Rheological Properties of Petroleum and Natural Asphalts.

ABSTRACT: Over the last decade, unexpected and sudden pavement failures have occurred in several provinces in South Korea. Some of these failures remain unexplained, further illustrating the gaps in our knowledge about binder chemistry. To prevent premature pavement distress and enhance road performance, it is imperative to provide an adequate characterization of asphalt. For this purpose, the current research aims at inspecting the chemistry, microstructure, thermal, and physico-rheological properties of two types of asphalt, namely petroleum asphalt (PA) and natural asphalt (NA). The binders were extensively investigated by using elemental analysis, thin-layer chromatography with flame ionization detection (TLC-FID), matrix-assisted laser desorption ionization time-of-fight mass spectroscopy (MALDI-TOF-MS), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy (RS), Nuclear magnetic resonance spectroscopy (¹H-NMR), ultraviolet and visible spectroscopy (UV-VIS), X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), penetration, softening point, ductility, and viscosity tests. The findings of this research have revealed the distinct variations between the chemical compositions, microstructures, and thermo-rheological properties of the two asphalts and provided valuable knowledge into the characteristics of the binders. Such insight has been effective in predicting the performance or distress of road pavement. This paper will, therefore, be of immediate interest to materials engineers in state highway agencies and asphalt industries.

SUBMITTER: Nciri N

PROVIDER: S-EPMC5456595 | biostudies-other | 2016 Oct

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Rheological, Microstructural and Thermal Properties of Magnetic Poly(Ethylene Oxide)/Iron Oxide Nanocomposite Hydrogels Synthesized Using a One-Step Gamma-Irradiation Method.

Project description:Magnetic polymer gels are a new promising class of nanocomposite gels. In this work, magnetic PEO/iron oxide nanocomposite hydrogels were synthesized using the one-step -irradiation method starting from poly(ethylene oxide) (PEO) and iron(III) precursor alkaline aqueous suspensions followed by simultaneous crosslinking of PEO chains and reduction of Fe(III) precursor. -irradiation dose and concentrations of Fe3+, 2-propanol and PEO in the initial suspensions were varied and optimized. With 2-propanol and at high doses magnetic gels with embedded magnetite nanoparticles were obtained, as confirmed by XRD, SEM and Mössbauer spectrometry. The quantitative determination of -irradiation generated Fe2+ was performed using the 1,10-phenanthroline method. The maximal Fe2+ molar fraction of 0.55 was achieved at 300 kGy, pH = 12 and initial 5% of Fe3+. The DSC and rheological measurements confirmed the formation of a well-structured network. The thermal and rheological properties of gels depended on the dose, PEO concentration and initial Fe3+ content (amount of nanoparticles synthesized inside gels). More amorphous and stronger gels were formed at higher dose and higher nanoparticle content. The properties of synthesized gels were determined by the presence of magnetic iron oxide nanoparticles, which acted as reinforcing agents and additional crosslinkers of PEO chains thus facilitating the one-step gel formation.

| S-EPMC7559070 | biostudies-literature

Synthesis, Thermal Properties, and Rheological Characteristics of Indole-Based Aromatic Polyesters.

Project description:Currently, there is an intensive development of bio-based aromatic building blocks to replace fossil-based terephthalates used for poly(ethylene terephthalate) production. Indole is a ubiquitous aromatic unit in nature, which has great potential as a bio-based feedstock for polymers or plastics. In this study, we describe the synthesis and characterization of new indole-based dicarboxylate monomers with only aromatic ester bonds, which can improve the thermal stability and glass-transition temperature (T g) of the resulting polyesters. The new dicarboxylate monomers were polymerized with five aliphatic diols to yield 10 new polyesters with tunable chemical structures and physical properties. Particularly, the T g values of the obtained polyesters can be as high as 113 °C, as indicated by differential scanning calorimetry and dynamic mechanical analysis. The polyesters showed decent thermal stability and distinct flow transitions as revealed by thermogravimetric analysis and rheology measurements.

| S-EPMC6751728 | biostudies-literature

Rheological and thermal degradation properties of hyperbranched polyisoprene prepared by anionic polymerization.

Project description:Hyperbranched polyisoprene was prepared by anionic copolymerization under high vacuum condition. Size exclusion chromatography was used to characterize the molecular weight and branching nature of these polymers. The characterization by differential scanning calorimetry and melt rheology indicated lower Tg and complex viscosity in the branched polymers as compared with the linear polymer. Degradation kinetics of these polymers was explored using thermogravimetric analysis via non-isothermal techniques. The polymers were heated under nitrogen from ambient temperature to 600°C using heating rates from 2 to 15°C min-1. Three kinetics methods namely Friedman, Flynn-Wall-Ozawa and Kissinger-Akahira-Sunose were used to evaluate the dependence of activation energy (Ea ) on conversion (?). The hyperbranched polyisoprene decomposed via multistep mechanism as manifested by the nonlinear relationship between ? and Ea while the linear polymer exhibited a decline in Ea at higher conversions. The average Ea values range from 258 to 330 kJ mol-1 for the linear, and from 260 to 320 kJ mol-1 for the branched polymers. The thermal degradation of the polymers studied involved one-dimensional diffusion mechanism as determined by Coats-Redfern method. This study may help in understanding the effect of branching on the rheological and decomposition kinetics of polyisoprene.

| S-EPMC6894563 | biostudies-literature

Physicochemical, functional, and microstructural properties of modified insoluble dietary fiber extracted from rose pomace.

Project description:Rose pomace, a by-product of the essential oil extraction process, is rich in dietary fiber. Insoluble dietary fiber (IDF) extracted from rose pomace was modified by enzymatic hydrolysis (EH) and ultrasound-assisted enzymatic hydrolysis (UEH) methods, and their physicochemical, functional, and microstructural properties were studied. The results showed that EH treatment performed better in the yield of soluble dietary fiber and the glucose adsorption capacity than UEH which contributed to better oil-holding, swelling, cation-exchange, and cholesterol adsorption capacities. Moreover, cellulose, hemicellulose, and lignin were detected based on Fourier transform infrared spectra and X-ray diffraction patterns. Scanning electron microscopy revealed that IDF had a shaly surface with a loose block structure after modification. In conclusion, different modification degrees have respective advantages, and modified IDF from rose pomace could be utilized in the food industry as a new source of functional ingredients, as well as to increase the economic value of rose products.

| S-EPMC7054496 | biostudies-literature

Physicochemical, antioxidant, microstructural, and sensory properties of sesame bars sweetened with pear juice concentrate.

Project description:Pear juice concentrate (PJC) can be used as a natural sweetener in various processed foods. In this study, sesame bars were manufactured by adding PJC and rice syrup at mixing ratios of 0:30 (G-0), 1:29 (G-1), 3:27 (G-3), and 5:25 (G-5), and the bars were investigated for their physiochemical properties, antioxidants, morphology, and sensory attributes. Addition of PJC at more than 3% increased a* and b* values of bars, decreased cohesiveness, hardness, and compactness, and made the bars malleable. Antioxidants, sugars, and organic acids in the sesame bars increased significantly with a corresponding increase in PJC level from 1 to 5%. Prominent changes in functional groups and corresponding spectral characteristics were observed in sesame bars with 5% PJC. Lower PJC levels produced a compacted morphology, bars with more than 5% PJC exhibited a dented structure. Based on the sensory properties, sesame bars with PJC (3%) showed excellent overall acceptability.

| S-EPMC7550441 | biostudies-literature

Gas Barrier, Thermal, Mechanical and Rheological Properties of Highly Aligned Graphene-LDPE Nanocomposites.

Project description:This contribution reports on properties of low-density polyethylene-based composites filled with different amounts of graphene nanoplatelets. The studied samples were prepared in the form of films by means of the precoating technique and single screw melt-extrusion, which yields a highly ordered arrangement of graphene flakes and results in a strong anisotropy of composites morphology. The performed tests of gas permeability reveal a drastic decrease of this property with increasing filler content. A clear correlation is found between permeability and free volume fraction in the material, the latter evaluated by means of positron annihilation spectroscopy. A strong anisotropy of the thermal conductivity is also achieved and the thermal conductivity along the extrusion direction for samples filled with 7.5 wt % of GnP (graphene nanoplatelets) reached 2.2 W/m·K. At the same time, when measured through a plane, a slight decrease of thermal conductivity is found. The use of GnP filler leads also to improvements of mechanical properties. The increase of Young's modulus and tensile strength are reached as the composites become more brittle.

| S-EPMC6432036 | biostudies-literature

Thermal, Rheological, Mechanical, and Electrical Properties of Polypropylene/Multi-Walled Carbon Nanotube Nanocomposites.

Project description:In this paper, nanocomposites based on polypropylene (PP) filled with up to 5 wt.% of multi-walled carbon nanotubes (MWCNTs) were investigated for determining the material property data used in numerical simulation of manufacturing processes such as the injection molding and extrusion. PP/MWCNT nanocomposite pellets were characterized for rheological behavior, crystallinity, specific volume and thermal conductivity, while injection-molded samples were characterized for mechanical and electrical properties. The addition of MWCNTs does not significantly change the melting and crystallization behavior of the PP/MWCNT nanocomposites. The effect of MWCNTs on melt shear viscosity is more pronounced at low shear rates and MWCNT loadings of 1-5 wt.%. However, with the addition of up to 5 wt.% of MWCNTs, the PP/MWCNT nanocomposite still behaves like a non-Newtonian fluid. The specific volume of the PP/MWCNT nanocomposites decreases with increasing MWCNT loading, especially in the MWCNT range of 1-5 wt.%, indicating better dimensional stability. The thermal conductivity, depending on the pressure, MWCNT wt.% and temperature, did not exceed 0.35 W/m·K. The PP/MWCNT nanocomposite is electrical non-conductive up to 3 wt.%, whereas after the percolating path is created, the nanocomposite with 5 wt.% becomes semi-conductive with an electrical conductivity of 10-1 S/m. The tensile modulus, tensile strength and stress at break increase with increasing MWCNT loading, whereas the elongation at break significantly decreases with increasing MWCNT loading. The Cross and modified 2-domain Tait models are suitable for predicting the melt shear viscosity and specific volume as a function of MWCNTs, respectively. These results enable users to integrate the PP/MWCNT nanocomposites into computer aided engineering analysis.

| S-EPMC7825608 | biostudies-literature

The Influence of Konjac Glucomannan on the Physicochemical and Rheological Properties and Microstructure of Canna Starch.

Project description:The addition of hydrocolloid is an effective method to improve the properties of native starch. However, few studies have investigated the effects of konjac glucomannan (KGM) on canna starch (CS). In this study, the effects of various KGM concentration on the pasting, rheological, textural, and morphological properties of CS were investigated. The addition of KGM significantly increased CS's pasting viscosities. Incorporation of KGM in CS at a relatively high level (1.2% w/w) exerted a significant influence on the pasting properties of CS. The consistency coefficient of CS was notably increased by KGM (from 43.6 to 143.3 Pa·sn) and positively correlated positive with KGM concentration. KGM concentration at a relatively high level (1.2% w/w) increased the elasticities and cohesiveness of CS by 53.3% and 88.0%, respectively, in texture profile analysis. The polarized optical microscope images indicated that KGM played an important part in protecting the crystalline structure of CS during heating. A denser porous microstructure with a filamentous network was observed in gelatinized KGM/CS mixtures as compared with the CS control. This research advances the knowledge of interactions between KGM and CS and opens possibilities to improve rheological properties of CS and to develop its new functionalities with KGM addition.

| S-EPMC7918958 | biostudies-literature

Model of hindlimb unloading in adult female rats: Characterizing bone physicochemical, microstructural, and biomechanical properties.

Project description:Prolonged bedrest and microgravity induce alterations to bone, leading to bone fragility and compromising the quality of life. In this study, we characterized the physicochemical changes, microstructure, and biomechanics of the femurs of female adult rats in response to hindlimb unloading for 21 days. Twenty 6-month-old Wistar female rats were distributed into control (CON) and hindlimb unloading (HLU) groups. Analysis the in vivo bone mineral density (BMD) by dual energy x-ray absorptiometry (DXA) from the femurs was performed at the beginning and end of the experiment; plasma levels of calcium, phosphorus, and alkaline phosphatase, tartrate-resistant acid phosphatase activity, assessed by spectrophotometry, and estradiol, measured by enzyme-linked immunosorbent assay, was performed after the experiment. We evaluated changes in the trabecular and cortical structure of the femur, after disuse, by micro-computed tomography with high resolution, for analysis of cortical porosity, Raman spectroscopy to measure the amount of physicochemical properties, and the biomechanical test to estimate the changes in biomechanical properties. Our results demonstrated that, after 21 days, HLU animals had decreased femoral BMD, deteriorated bone microarchitecture, particularly in the cortical compartment, with changes in the physicochemical properties and porosity, and reduced deformation capacity of the bone and resistance to the bone stresses. Nevertheless, this study showed the critical role of mechanical stimulation in maintaining the structure of the skeleton in female adults and that disuse, even for a few days, leads to microscopic changes in the structure of the bone matrix, which increases the risk of fracture.

| S-EPMC5724829 | biostudies-literature

Mechanical, Thermal and Rheological Properties of Polyethylene-Based Composites Filled with Micrometric Aluminum Powder.

Project description:Investigations related to polymer/metal composites are often limited to the analysis of the electrical and thermal conductivity of the materials. The presented study aims to analyze the impact of aluminum (Al) filler content (from 1 to 20 wt%) on the rarely investigated properties of composites based on the high-density polyethylene (HDPE) matrix. The crystalline structure, rheological (melt flow index and oscillatory rheometry), thermal (differential scanning calorimetry), as well as static (tensile tests, hardness, rebound resilience) and dynamic (dynamical mechanical analysis) mechanical properties of composites were investigated. The incorporation of 1 and 2 wt% of aluminum filler resulted in small enhancements of mechanical properties, while loadings of 5 and 10 wt% provided materials with a similar performance to neat HDPE. Such results were supported by the lack of disturbances in the rheological behavior of composites. The presented results indicate that a significant content of aluminum filler may be introduced into the HDPE matrix without additional pre-treatment and does not cause the deterioration of composites' performance, which should be considered beneficial when engineering PE/metal composites.

| S-EPMC7085091 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data