Dataset Information

Surface Characterization, Corrosion Resistance and in Vitro Biocompatibility of a New Ti-Hf-Mo-Sn Alloy.

ABSTRACT: A new superelastic Ti-23Hf-3Mo-4Sn biomedical alloy displaying a particularly large recovery strain was synthesized and characterized in this study. Its native passive film is very thick (18 nm) and contains very protective TiO2, Ti2O3, HfO2, MoO2, and SnO2 oxides (XPS analysis). This alloy revealed nobler electrochemical behavior, more favorable values of the corrosion parameters and open circuit potentials in simulated body fluid in comparison with commercially pure titanium (CP-Ti) and Ti-6Al-4V alloy taken as reference biomaterials in this study. This is due to the favorable influence of the alloying elements Hf, Sn, Mo, which enhance the protective properties of the native passive film on alloy surface. Impedance spectra showed a passive film with two layers, an inner, capacitive, barrier, dense layer and an outer, less insulating, porous layer that confer both high corrosion resistance and bioactivity to the alloy. In vitro tests were carried out in order to evaluate the response of Human Umbilical Vein Endothelial Cells (HUVECs) to Ti-23Hf-3Mo-4Sn alloy in terms of cell viability, cell proliferation, phenotypic marker expression and nitric oxide release. The results indicate a similar level of cytocompatibility with HUVEC cells cultured on Ti-23Hf-3Mo-4Sn substrate and those cultured on the conventional CP-Ti and Ti-6Al-4V metallic materials.

SUBMITTER: Ion R

PROVIDER: S-EPMC5456635 | biostudies-other | 2016 Oct

REPOSITORIES: biostudies-other

ACCESS DATA

Similar Datasets

Project description:Highlights • Ti-8Mo-2Fe was resistant to pitting corrosion in PBS, a clear advantage over 316 L.• Ti-8Mo-2Fe exhibited similar corrosion rate in PBS than pure ti and 316 L.• Ti-8Mo-2Fe alloy did not generate acute hemolysis.• Blood coagulation was retarded on ti-8mo-2fe surface in comparison to pure Ti.• The proliferation rate of ECs and SMCs on ti-8mo-2fe was lower than on 316 L. There is a deep interest in developing new Ni-free Ti-based alloys to replace 316 L stainless steel and Co-Cr alloys for endovascular stent application, mainly because the release of Ni can generate toxicity and allergenicity. Interactions of Ti alloy biomaterials with bone cells and tissues have been widely investigated and reported, while interactions with vascular cells and tissues, such as endothelial cells (ECs) and smooth muscle cells (SMCs), are scarce. Therefore, this study focused on the relationship among the surface finishing features, corrosion behavior and in vitro biological performances regarding human ECs, SMCs and blood of a newly developed Ti-8Mo-2Fe (TMF) alloy, specifically designed for balloon-expandable stent applications. The alloy performances were compared to those of 316 L and pure Ti, prepared with the same surface finishing techniques, which are mechanical polishing and electropolishing. Surface properties were investigated by scanning electron microscopy (SEM), atomic force microscopy (AFM), contact angle (CA) and x-ray photoelectron spectroscopy (XPS). The corrosion behavior was assessed with potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) tests in phosphate buffered saline (PBS) solution. No significant differences were observed regarding the corrosion rate measured with PDP analyses, which was of the order of 2 × 10−4 mm/y for all the studied materials. Moreover, similarly to pure Ti, TMF exhibited an advantage over 316 L for biomedical applications, namely remarkable resistance to pitting corrosion up to high potentials. The results evidenced a good cytocompatibility and hemocompatibility, making this group of alloy a potential candidate for cardiovascular implants. In fact, both ECs and SMCs proliferated on TMF surfaces showing a 7-day viability similar to that of pure Ti. Regarding hemocompatibility, TMF did not cause hemolysis, and blood coagulation was delayed on its surface in comparison to pure Ti. When compared to 316 L, TMF showed similar hemocompatibility.

Dataset Information

Surface Characterization, Corrosion Resistance and in Vitro Biocompatibility of a New Ti-Hf-Mo-Sn Alloy.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets