Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Plastic Behavior of Metallic Damping Materials under Cyclical Shear Loading.

ABSTRACT: Metallic shear panel dampers (SPDs) have been widely adopted in seismic engineering. In this study, axial and torsional specimens of four types of metallic damping materials, including three conventional metallic steels as well as low yield strength steel 160 (LYS160), were tested in order to investigate the material response under repeated large plastic strain and low cycle fatigue between 10 and 30 cycles. The present study demonstrated that both the deformation capacity and fatigue performance of LYS160 were underestimated by the conversion from the traditional uniaxial tensile test. The main difference in the failure mechanism between LYS160 and the three conventional materials was determined from the scanning electron microscopy data. The dominant failure mode in LYS160 is stable interlaminate slip and not bucking. Our results provide physical insights into the origin of the large deformation capacity, which is an important foundation for the lightweight design of SPDs.

SUBMITTER: Zhang C

PROVIDER: S-EPMC5456815 | biostudies-other | 2016 Jun

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Metallic ferromagnetic films with magnetic damping under 1.4?×?10<sup>-3</sup>.

Project description:Low-damping magnetic materials have been widely used in microwave and spintronic applications because of their low energy loss and high sensitivity. While the Gilbert damping constant can reach 10-4 to 10-5 in some insulating ferromagnets, metallic ferromagnets generally have larger damping due to magnon scattering by conduction electrons. Meanwhile, low-damping metallic ferromagnets are desired for charge-based spintronic devices. Here, we report the growth of Co25Fe75 epitaxial films with excellent crystalline quality evident by the clear Laue oscillations and exceptionally narrow rocking curve in the X-ray diffraction scans as well as from scanning transmission electron microscopy. Remarkably, the Co25Fe75 epitaxial films exhibit a damping constant <1.4?×?10-3, which is comparable to the values for some high-quality Y3Fe5O12 films. This record low damping for metallic ferromagnets offers new opportunities for charge-based applications such as spin-transfer-torque-induced switching and magnetic oscillations.Owing to their conductivity, low-damping metallic ferromagnets are preferred to insulating ferromagnets in charge-based spintronic devices, but are not yet well developed. Here the authors achieve low magnetic damping in CoFe epitaxial films which is comparable to conventional insulating ferromagnetic YIG films.

| S-EPMC5550470 | biostudies-literature

Experimental characterization of shear transformation zones for plastic flow of bulk metallic glasses.

Project description:We report experimental characterization of shear transformation zones (STZs) for plastic flow of bulk metallic glasses (BMGs) based on a newly developed cooperative shearing model [Johnson WL, Samwer K (2005) A universal criterion for plastic yielding of metallic glasses with a (T/T(g))(2/3) temperature dependence. Phys Rev Lett 95: 195501]. The good agreement between experimental measurements and theoretical predictions in the STZ volumes provides compelling evidence that the plastic flow of metallic glasses occurs through cooperative shearing of unstable STZs activated by shear stresses. Moreover, the ductility of BMGs was found to intrinsically correlate with their STZ volumes. The experiments presented herein pave a way to gain a quantitative insight into the atomic-scale mechanisms of BMG mechanical behavior.

| S-EPMC2567442 | biostudies-literature

Non-coaxiality of sand under bi-directional shear loading.

Project description:This study aims to investigate the effect of consolidation shear stress magnitude on the shear behaviour and non-coaxiality of soils. In previous drained bi-directional simple shear test on Leighton Buzzard sand, it is showed that the level of non-coaxiality, which is indicated by the angle difference between the principal axes of stresses and the corresponding principal axes of strain rate tensors, is increased by increasing angle difference between the direction of consolidation shear stress and secondary shearing. This paper further investigated the relation and includes results with higher consolidation shear stresses. Results agree with the previous relation, and further showed that increasing consolidation shear stresses decreased the level of non-coaxiality in tests with angle difference between 0° and 90°, and increased the level of non-coaxiality in tests with angle difference between 90° and 180°.

| S-EPMC5990770 | biostudies-literature

Flaw-induced plastic-flow dynamics in bulk metallic glasses under tension.

Project description:Inheriting amorphous atomic structures without crystalline lattices, bulk metallic glasses (BMGs) are known to have superior mechanical properties, such as high strength approaching the ideal value, but are susceptible to catastrophic failures. Understanding the plastic-flow dynamics of BMGs is important for achieving stable plastic flow in order to avoid catastrophic failures, especially under tension, where almost all BMGs demonstrate limited plastic flow with catastrophic failure. Previous findings have shown that the plastic flow of BMGs displays critical dynamics under compression tests, however, the plastic-flow dynamics under tension are still unknown. Here we report that power-law critical dynamics can also be achieved in the plastic flow of tensile BMGs by introducing flaws. Differing from the plastic flow under compression, the flaw-induced plastic flow under tension shows an upward trend in the amplitudes of the load drops with time, resulting in a stable plastic-flow stage with a power-law distribution of the load drop. We found that the flaw-induced plastic flow resulted from the stress gradients around the notch roots, and the stable plastic-flow stage increased with the increase of the stress concentration factor ahead of the notch root. The findings are potentially useful for predicting and avoiding the catastrophic failures in tensile BMGs by tailoring the complex stress fields in practical structural-applications.

| S-EPMC5078772 | biostudies-literature

Regulation of Kir2.1 Function Under Shear Stress and Cholesterol Loading.

Project description: Not available

| S-EPMC5866345 | biostudies-literature

Fiber-Embedded Metallic Materials: From Sensing towards Nervous Behavior.

Project description:Embedding of fibers in materials has attracted serious attention from researchers and has become a new research trend. Such material structures are usually termed "smart" or more recently "nervous". Materials can have the capability of sensing and responding to the surrounding environmental stimulus, in the former, and the capability of feeling multiple structural and external stimuli, while feeding information back to a controller for appropriate real-time action, in the latter. In this paper, embeddable fibers, embedding processes, and behavior of fiber-embedded metallic materials are reviewed. Particular emphasis has been given to embedding fiber Bragg grating (FBG) array sensors and piezo wires, because of their high potential to be used in nervous materials for structural health monitoring. Ultrasonic consolidation and laser-based layered manufacturing processes are discussed in detail because of their high potential to integrate fibers without disruption. In addition, current challenges associated with embedding fibers in metallic materials are highlighted and recommendations for future research work are set.

| S-EPMC5458883 | biostudies-other

Ultralow magnetic damping of a common metallic ferromagnetic film.

Project description:For most magnetic materials, ultralow damping is of key importance for spintronic and spin-orbitronic applications, but the number of materials suitable for charge-based spintronic and spin-orbitronic applications is limited because of magnon-electron scattering. However, some theoretical approaches including the breathing Fermi surface model, generalized torque correlation model, scattering theory, and linear response damping model have been presented for the quantitative calculation of transition metallic ferromagnet damping. For the Fe-Co alloy, an ultralow intrinsic damping approaching 10-4 was first theoretically predicted using a linear response damping model by Mankovsky et al. and then experimentally observed by Schoen et al. Here, we experimentally report a damping parameter approaching 1.5 × 10-3 for traditional fundamental iron aluminide (FeAl) soft ferromagnets that is comparable to those of 3d transition metallic ferromagnets and explain this phenomenon based on the principle of minimum electron density of states.

| S-EPMC7817099 | biostudies-literature

Behavior of nonplastic silty soils under cyclic loading.

Project description:The engineering behavior of nonplastic silts is more difficult to characterize than is the behavior of clay or sand. Especially, behavior of silty soils is important in view of the seismicity of several regions of alluvial deposits in the world, such as the United States, China, and Turkey. In several hazards substantial ground deformation, reduced bearing capacity, and liquefaction of silty soils have been attributed to excess pore pressure generation during dynamic loading. In this paper, an experimental study of the pore water pressure generation of silty soils was conducted by cyclic triaxial tests on samples of reconstituted soils by the slurry deposition method. In all tests silty samples which have different clay percentages were studied under different cyclic stress ratios. The results have showed that in soils having clay content equal to and less than 10%, the excess pore pressure ratio buildup was quicker with an increase in different cyclic stress ratios. When fine and clay content increases, excess pore water pressure decreases constant cyclic stress ratio in nonplastic silty soils. In addition, the applicability of the used criteria for the assessment of liquefaction susceptibility of fine grained soils is examined using laboratory test results.

| S-EPMC3929542 | biostudies-other

Experimental Characteristics of Dry Stack Masonry under Compression and Shear Loading.

Project description:The behavior of dry stack masonry (DSM) is influenced by the interaction of the infill with the frame (especially the joints between bricks), which requires further research. This study investigates the compression and shear behaviors of DSM. First, a series of compression tests were carried out on both masonry prism with mortar (MP_m) and DSM prism (MP_ds). The failure mode of each prism was determined. Different from the MP_m, the stress-strain relationship of the MP_ds was characterized by an upward concavity at the initial stage. The compression strength of the MP_ds was slightly reduced by 15%, while the elastic modulus was reduced by over 62%. In addition, 36 shear-compression tests were carried out under cyclic loads to emphasize the influence of various loads on the shear-compression behavior of DSM. The results showed that the Mohr-Coulomb friction law adequately represents the failure of dry joints at moderate stress levels, and the varying friction coefficients under different load amplitudes cannot be neglected. The experimental setup and results are valuable for further research.

| S-EPMC5458854 | biostudies-other

Deformation behavior of metallic glasses with shear band like atomic structure: a molecular dynamics study.

Project description:Molecular dynamics simulations were employed to investigate the plastic deformation within the shear bands in three different metallic glasses (MGs). To mimic shear bands, MG specimens were first deformed until flow localization occurs, and then the volume of the material within the localized regions was extracted and replicated. Homogeneous deformation that is independent of the size of the specimen was observed in specimens with shear band like structure, even at a temperature that is far below the glass transition temperature. Structural relaxation and rapid cooling were employed to examine the effect of free volume content on the deformation behavior. This was followed by detailed atomic structure analyses, employing the concepts of Voronoi polyhedra and "liquid-like" regions that contain high fraction of sub-atomic size open volumes. Results suggest that the total fraction of atoms in liquid-like regions is a key parameter that controls the plastic deformation in MGs. These are discussed in the context of reported experimental results and possible strategies for synthesizing monolithic amorphous materials that can accommodate large tensile plasticity are suggested.

| S-EPMC4969605 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data