Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Characterizations of Rapid Sintered Nanosilver Joint for Attaching Power Chips.

ABSTRACT: Sintering of nanosilver paste has been extensively studied as a lead-free die-attach solution for bonding semiconductor power chips, such as the power insulated gated bipolar transistor (IGBT). However, for the traditional method of bonding IGBT chips, an external pressure of a few MPa is reported necessary for the sintering time of ~1 h. In order to shorten the processing duration time, we developed a rapid way to sinter nanosilver paste for bonding IGBT chips in less than 5 min using pulsed current. In this way, we firstly dried as-printed paste at about 100 °C to get rid of many volatile solvents because they may result in defects or voids during the out-gassing from the paste. Then, the pre-dried paste was further heated by pulse current ranging from 1.2 kA to 2.4 kA for several seconds. The whole procedure was less than 3 min and did not require any gas protection. We could obtain robust sintered joint with shear strength of 30-35 MPa for bonding 1200-V, 25-A IGBT and superior thermal properties. Static and dynamic electrical performance of the as-bonded IGBT assemblies was also characterized to verify the feasibility of this rapid sintering method. The results indicate that the electrical performance is comparable or even partially better than that of commercial IGBT modules. The microstructure evolution of the rapid sintered joints was also studied by scanning electron microscopy (SEM). This work may benefit the wide usage of nanosilver paste for rapid bonding IGBT chips in the future.

SUBMITTER: Feng ST

PROVIDER: S-EPMC5456888 | biostudies-other | 2016 Jul

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Assessing the Power of Exome Chips.

Project description:Genotyping chips for rare and low-frequent variants have recently gained popularity with the introduction of exome chips, but the utility of these chips remains unclear. These chips were designed using exome sequencing data from mainly American-European individuals, enriched for a narrow set of common diseases. In addition, it is well-known that the statistical power of detecting associations with rare and low-frequent variants is much lower compared to studies exclusively involving common variants. We developed a simulation program adaptable to any exome chip design to empirically evaluate the power of the exome chips. We implemented the main properties of the Illumina HumanExome BeadChip array. The simulated data sets were used to assess the power of exome chip based studies for varying effect sizes and causal variant scenarios. We applied two widely-used statistical approaches for rare and low-frequency variants, which collapse the variants into genetic regions or genes. Under optimal conditions, we found that a sample size between 20,000 to 30,000 individuals were needed in order to detect modest effect sizes (0.5% < PAR > 1%) with 80% power. For small effect sizes (PAR <0.5%), 60,000-100,000 individuals were needed in the presence of non-causal variants. In conclusion, we found that at least tens of thousands of individuals are necessary to detect modest effects under optimal conditions. In addition, when using rare variant chips on cohorts or diseases they were not originally designed for, the identification of associated variants or genes will be even more challenging.

| S-EPMC4593624 | biostudies-literature

The Clinical Features and Bacteriological Characterizations of Bone and Joint Tuberculosis in China.

Project description:Bone and Joint tuberculosis (BJTB) constitutes about 10% of total extra-pulmonary TB cases. Since the BJTB is a paucibacillary condition, there has been no systematic study on the bacterial characterization, especially the epidemiological feature. Here we collected the mycobacterial clinical isolates, analyzed the clinical features and the bacteriological characteristics from 113 BJTB cases reported in China. The mean age of the cases was 40.33 years while most of the patients fell into the 20-29 year age group; local pain was the most common onset symptom of BJTB cases; mean time from symptom onset to BJTB diagnosis was 13.16 months. 31 isolates were defined as drug resistant, including 15 multidrug resistant (MDR) and 2 extensively drug resistant (XDR) isolates according to the drug susceptibility test outcomes; after spoligotyping, 87.6% (99/113) isolates were categorized as Beijing family. In contrast to the isolates from pulmonary tuberculosis patients, here the MIRU-VNTR assay did not find anything significant. A prolonged time span for BJTB diagnosis highlights the requirement of paying further attention to BJTB infection in China. This study provides essential insights into the demographic and microbial characteristics of BJTB cases in China.

| S-EPMC4459174 | biostudies-literature

Rapid Detection of Procalcitonin in septic serum by Immunoaffinity MALDI Chips

Project description:PCT concentration in the bloodstream correlates well with sepsis presence and in severe cases increases up to a thousand times from the healthy physiological values in a short time. In this study, we developed a rapid technique for PCT detection by MALDI-MS, that uses in-situ enrichment directly on the specialized immuno MALDI chips that are utilized directly as MALDI plates. The method’s ability to detect PCT was confirmed by comparing the results with LC-MS bottom-up workflow.

2023-07-20 | PXD035456 | Pride

SARS-CoV-2-Impedimetric Biosensor: Virus-Imprinted Chips for Early and Rapid Diagnosis

Project description:Due to the current global SARS-CoV-2 pandemic, rapid and accurate diagnostic tools are

| S-EPMC8592124 | biostudies-literature

Integrated barcode chips for rapid, multiplexed analysis of proteins in microliter quantities of blood.

Project description:As the tissue that contains the largest representation of the human proteome, blood is the most important fluid for clinical diagnostics. However, although changes of plasma protein profiles reflect physiological or pathological conditions associated with many human diseases, only a handful of plasma proteins are routinely used in clinical tests. Reasons for this include the intrinsic complexity of the plasma proteome, the heterogeneity of human diseases and the rapid degradation of proteins in sampled blood. We report an integrated microfluidic system, the integrated blood barcode chip that can sensitively sample a large panel of protein biomarkers over broad concentration ranges and within 10 min of sample collection. It enables on-chip blood separation and rapid measurement of a panel of plasma proteins from quantities of whole blood as small as those obtained by a finger prick. Our device holds potential for inexpensive, noninvasive and informative clinical diagnoses, particularly in point-of-care settings.

| S-EPMC2775523 | biostudies-literature

Design of Fluorescence-Enhanced Silver Nanoisland Chips for High-Throughput and Rapid Arsenite Assay.

Project description:High-throughput and rapid arsenite (As(III)) monitoring is an urgent task to deal with the critical threat from As(III) contamination in the environment. In this study, an effective, portable, and sensitive As(III) assay was developed using the plasmonic silver (pAg) chips for As(III) detection. The pAg chips were fabricated by a simple seed-mediated method to grow the silver nanoisland films (Ag-NIFs) with the compact nanoislands and adjustable interisland gaps on the large-sized substrates. With appropriate surface functionalization and optimal chip manufacturing, Cy7.5 fluorescence dye can be immobilized on the surface of Ag-NIFs in the presence of As(III) to output the enhanced fluorescence signals up to 10-fold and improve the detection limit of As(III) less than 10 ppb. According to our results, the high-throughput detection measurements and wide dynamic range over 4 orders of magnitude implied the broad prospects of pAg chips in fluorescence-enhanced assays. The proposed As(III) assay has shown great opportunities for the practical application of ultratrace As(III) monitoring.

| S-EPMC7424703 | biostudies-literature

Kinetics and mechanisms of nanosilver oxysulfidation.

Project description:Among the many new engineered nanomaterials, nanosilver is one of the highest priority cases for environmental risk assessment. Recent analysis of field samples from water treatment facilities suggests that silver is converted to silver sulfide, whose very low solubility may limit the bioavailability and adverse impact of silver in the environment. The present study demonstrates that silver nanoparticles react with dissolved sulfide species (H(2)S, HS(-)) under relevant but controlled laboratory conditions to produce silver sulfide nanostructures similar to those observed in the field. The reaction is tracked by time-resolved sulfide depletion measurements to yield quantitative reaction rates and stoichiometries. The reaction requires dissolved oxygen, and it is sensitive to pH and natural organic matter. Focused-ion-beam analysis of surface films reveals an irregular coarse-grained sulfide phase that allows deep (>1 ?m) conversion of silver surfaces without passivation. At high sulfide concentrations, nanosilver oxysulfidation occurs by a direct particle-fluid reaction. At low sulfide concentration, quantitative kinetic analysis suggests a mechanistic switch to an oxidative dissolution/precipitation mechanism, in which the biologically active Ag(+) ion is generated as an intermediate. The environmental transformation pathways for nanosilver will vary depending on the media-specific competing rates of oxidative dissolution and direct oxysulfidation.

| S-EPMC3164758 | biostudies-literature

Characterizations of kinetic power and propulsion of the nematode Caenorhabditis elegans based on a micro-particle image velocimetry system.

Project description:Quantifying the motility of micro-organisms is beneficial in understanding their biomechanical properties. This paper presents a simple image-based algorithm to derive the kinetic power and propulsive force of the nematode Caenorhabditis elegans. To avoid unnecessary disturbance, each worm was confined in an aqueous droplet of 0.5 μl. The droplet was sandwiched between two glass slides and sealed with mineral oil to prevent evaporation. For motion visualization, 3-μm fluorescent particles were dispersed in the droplet. Since the droplet formed an isolated environment, the fluid drag and energy loss due to wall frictions were associated with the worm's kinetic power and propulsion. A microparticle image velocimetry system was used to acquire consecutive particle images for fluid analysis. The short-time interval (Δt < 20 ms) between images enabled quasi real-time measurements. A numerical simulation of the flow in a straight channel showed that the relative error of this algorithm was significantly mitigated as the image was divided into small interrogation windows. The time-averaged power and propulsive force of a N2 adult worm over three swimming cycles were estimated to be 5.2 ± 3.1 pW and 1.0 ± 0.8 nN, respectively. In addition, a mutant, KG532 [kin-2(ce179) X], and a wild-type (N2) worm in a viscous medium were investigated. Both cases showed an increase in the kinetic power as compared with the N2 worm in the nematode growth medium due to the hyperactive nature of the kin-2 mutant and the high viscosity medium used. Overall, the technique deals with less sophisticated calculations and is automation possible.

| S-EPMC4000384 | biostudies-other

Rapid molecular microbiologic diagnosis of prosthetic joint infection.

Project description:We previously showed that culture of samples obtained by prosthesis vortexing and sonication was more sensitive than tissue culture for prosthetic joint infection (PJI) diagnosis. Despite improved sensitivity, culture-negative cases remained; furthermore, culture has a long turnaround time. We designed a genus-/group-specific rapid PCR assay panel targeting PJI bacteria and applied it to samples obtained by vortexing and sonicating explanted hip and knee prostheses, and we compared the results to those with sonicate fluid and periprosthetic tissue culture obtained at revision or resection arthroplasty. We studied 434 subjects with knee (n = 272) or hip (n = 162) prostheses; using a standardized definition, 144 had PJI. Sensitivities of tissue culture, of sonicate fluid culture, and of PCR were 70.1, 72.9, and 77.1%, respectively. Specificities were 97.9, 98.3, and 97.9%, respectively. Sonicate fluid PCR was more sensitive than tissue culture (P = 0.04). PCR of prosthesis sonication samples is more sensitive than tissue culture for the microbiologic diagnosis of prosthetic hip and knee infection and provides same-day PJI diagnosis with definition of microbiology. The high assay specificity suggests that typical PJI bacteria may not cause aseptic implant failure.

| S-EPMC3697690 | biostudies-literature

Joint specific power production in cycling: The effect of cadence and intensity.

Project description:BACKGROUND:The effect of cadence and work rate on the joint specific power production in cycling has previously been studied, but research has primarily focused on cadences above 60 rpm, without examining the effect of low cadence on joint contribution to power. PURPOSE:Our purpose was to investigate joint specific power production in recreational and elite cyclists during low- and moderate cycling at a range of different cadences. METHODS:18 male cyclists (30.9 ± 2.7 years with a work rate in watt at lactate threshold of 282.3 ± 9.3 W) performed cycling bouts at seven different pedalling rates and three intensities. Joint specific power was calculated from kinematic measurements and pedal forces using inverse dynamics at a total of 21 different stages. RESULTS:A main effect of cadence on the relative to the total joint power for hip-, knee- and ankle joint power was found (all p < 0.05). Increasing cadence led to increasing knee joint power and decreasing hip joint power (all p < 0.05), with the exception at low cadence (<60 rpm), where there was no effect of cadence. The elite cyclists had higher relative hip joint power compared to the recreational group (p < 0.05). The hip joint power at moderate intensity with a freely chosen cadence (FCC) was lower than the hip joint power at low intensity with a low cadence (<60 rpm) (p < 0.05). CONCLUSION:This study demonstrates that there is an effect of cadence on the hip- and knee joint contribution in cycling, however, the effect only occurs from 60 rpm and upward. It also demonstrates that there is a difference in joint contribution between elite- and recreational cyclists, and provide evidence for the possibility of achieving higher relative hip joint power at low intensity than moderate intensity by altering the cadence.

| S-EPMC6386487 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data