Dataset Information

Nano-Inclusions Applied in Cement-Matrix Composites: A Review.

ABSTRACT: Research on cement-based materials is trying to exploit the synergies that nanomaterials can provide. This paper describes the findings reported in the last decade on the improvement of these materials regarding, on the one hand, their mechanical performance and, on the other hand, the new properties they provide. These features are mainly based on the electrical and chemical characteristics of nanomaterials, thus allowing cement-based elements to acquire "smart" functions. In this paper, we provide a quantitative approach to the reinforcements achieved to date. The fundamental concepts of nanoscience are introduced and the need of both sophisticated devices to identify nanostructures and techniques to disperse nanomaterials in the cement paste are also highlighted. Promising results have been obtained, but, in order to turn these advances into commercial products, technical, social and standardisation barriers should be overcome. From the results collected, it can be deduced that nanomaterials are able to reduce the consumption of cement because of their reinforcing effect, as well as to convert cement-based products into electric/thermal sensors or crack repairing materials. The main obstacle to foster the implementation of such applications worldwide is the high cost of their synthesis and dispersion techniques, especially for carbon nanotubes and graphene oxide.

SUBMITTER: Bastos G

PROVIDER: S-EPMC5456970 | biostudies-other | 2016 Dec

REPOSITORIES: biostudies-other

ACCESS DATA

Similar Datasets

Project description:A very low dosage of graphene oxide (GO) can enhance the mechanical durability of cement composites, but the reinforcing enhancement is highly dependent on the uniform dispersion of graphene in the matrix. Carboxylic groups at GO nanosheets have a decisive effect on GO aggregation in an alkaline cement solution because they have a strong complexation ability with aqueous Ca2+ released by cement hydration and subsequently crosslinks the adjacent graphene sheets, causing the immediate coagulation of GO. The available methods of homogeneously dispersing GO in a cement slurry cannot completely eliminate this carboxylic-crosslinking-induced GO coagulation. In this study, many hydroxyl groups were introduced onto the edge and planar nanosheets to prepare water-soluble hydroxylated graphene (HO-G) by facile ball milling. The structure of HO-G was thoroughly characterized in detail, and its dispersion behavior in pure water and Ca(OH)2 was extensively investigated. These results showed that the prepared HO-G exhibited good hydrophilicity and excellent colloidal dispersion ability against high pH and Ca2+ ions compared to GO. The effect of HO-G on the workability, mechanical strength, and chloride penetrability of a cement mortar was further studied. At a content of 0.03% by cement mass, HO-G provided 28.62 and 21.19% enhancements of compressive strength and 3.85 and 7.89% enhancements of flexural strength at 3 and 28 days, respectively, while the non-steady-state migration coefficient decreased by 31.51% compared to the reference mortar. Compared to GO, a lower dosage of HO-G exhibited a similar reinforcing effect to cement composites with little adverse impact on the fluidity of the fresh cement slurry. Moreover, the addition of HO-G could refine the pore structure, accelerate the hydration process of cement to some degree, and generate more hydration products so that the structure of the cement mortar was densified. Considering its environmentally friendly preparation, HO-G, as a promising reinforcing nanofiller, could provide a new solution to develop nanoengineered cement composites.

Dataset Information

Nano-Inclusions Applied in Cement-Matrix Composites: A Review.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure