Investigation on the Mechanical Properties of a Cement-Based Material Containing Carbon Nanotube under Drying and Freeze-Thaw Conditions.
Ontology highlight
ABSTRACT:
SUBMITTER: Li WW
PROVIDER: S-EPMC5458856 | biostudies-other | 2015 Dec
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The effects of cement dosage, compaction coefficient, molding method (vertical vibration method and static pressure method), and dry-wet and freeze-thaw cycles on the mechanical strength of cement-improved loess (CIL) were studied to reveal its strength degradation law under dry-wet and freeze-thaw cycles. Results show that when using the vertical vibration molding method, the strength degradation effect of CIL can be improved by increasing the cement dosage and compaction coefficient; however, it is not obvious. Under the action of dry-wet cycle, damages, such as voids and cracks of CIL, develop continuously. Further, the strength deteriorates continuously and does not decrease after more than 15 dry-wet cycles. Therefore, the dry-wet cycle degradation system is selected by considering the most unfavorable conditions. In the process of freeze-thaw alternation, the pores and fissures of CIL develop and evolve continuously and the strength deteriorates continuously under the joint influence of water and low temperature. The strength tends to become stable after more than 12 freeze-thaw cycles. According to the safety principle, the deterioration coefficient of the freeze-thaw cycles is 0.3.
| S-EPMC8248616 | biostudies-literature
Project description:This paper provides experimental results to investigate the mechanical properties of sustainable strain-hardening cement composite (2SHCC) for infrastructures after freeze-thaw actions. To improve the sustainability of SHCC materials in this study, high energy-consumptive components-silica sand, cement, and polyvinyl alcohol (PVA) fibers-in the conventional SHCC materials are partially replaced with recycled materials such as recycled sand, fly ash, and polyethylene terephthalate (PET) fibers, respectively. To investigate the mechanical properties of green SHCC that contains recycled materials, the cement, PVA fiber and silica sand were replaced with 10% fly ash, 25% PET fiber, and 10% recycled aggregate based on preliminary experimental results for the development of 2SHCC material, respectively. The dynamic modulus of elasticity and weight for 2SHCC material were measured at every 30 cycles of freeze-thaw. The effects of freeze-thaw cycles on the mechanical properties of sustainable SHCC are evaluated by conducting compressive tests, four-point flexural tests, direct tensile tests and prism splitting tests after 90, 180, and 300 cycles of rapid freeze-thaw. Freeze-thaw testing was conducted according to ASTM C 666 Procedure A. Test results show that after 300 cycles of freezing and thawing actions, the dynamic modulus of elasticity and mass loss of damaged 2SHCC were similar to those of virgin 2SHCC, while the freeze-thaw cycles influence mechanical properties of the 2SHCC material except for compressive behavior.
| S-EPMC5453078 | biostudies-other
Project description:Biochar (BC) is widely utilized as a soil amendment; however, for widely distributed seasonally frozen soils, the effect of BC on soil and the optimal utilization of BC during the freeze‒thaw process are still unclear. In this study, the effects of freeze‒thaw aged biochar (FT-BC) and BC on soil properties and wheat cultivation were systematically investigated, and the underlying interaction mechanism between BC and soil was explored. The results show that FT-BC dramatically reduces the adverse effects of freeze‒thaw cycles on soil, enhances wheat growth, and increases dry matter yield by 17.5 %, which is mainly attributed to the ability of FT-BC to maintain soil structure, reduce water loss rates to below 0.20 g/h, and decrease nitrogen leaching by more than 20 % during freeze‒thaw cycles. Additionally, fresh BC had a greater effect on the fixation of cadmium than FT-BC in the soil, reducing its accumulation in wheat by 22.5 %. Multiple characterizations revealed that the freeze‒thaw process increased the porosity and specific surface area of FT-BC, providing more sites for water and nitrogen adsorption, whereas the dissolved organic matter released from fresh BC had a better ability to trap cadmium. These findings provide insights into the interactions between BC and soil components during the freeze‒thaw process and suggest the optimized utilization of fresh BC and FT-BC for different soil repair purposes.
| S-EPMC11320211 | biostudies-literature
Project description:The reuse of rubber in concrete results in two major opposing effects: an enhancement in durability and a reduction in mechanical strength. In order to strengthen the mechanical properties of rubber concrete, steel fibers were added in this research. The compressive strength, the four-point bending strength, the mass loss rate, and the relative dynamic elastic modulus of steel fiber reinforced rubber concrete, subjected to cyclic freezing and thawing, were tested. The effects of the content of steel fibers on the freeze-thaw resistance are discussed. The microstructure damage was captured and analyzed by Industrial Computed Tomography (ICT) scanning. Results show that the addition of 2.0% steel fibers can increase the compressive strength of rubber concrete by 26.6% if there is no freeze-thaw effect, but the strengthening effect disappears when subjected to cyclic freeze-thaw. The enhancement of steel fibers on the four-point bending strength is effective under cyclic freeze-thaw. The effect of steel fibers is positive on the mass loss rate but negative on the relative dynamic elastic modulus.
| S-EPMC7085194 | biostudies-literature
Project description:The rate of progression of geomorphological phenomena is greatly influenced by freeze-thaw processes. In the face of air temperature increasing over the past few decades, a question of the future impact of these processes arises, notably in the temperate and cold climate zones. Using the mean, maximum and minimum daily air temperature data in the period 1951-2018 obtained from three weather stations located in the vicinity of Jeziorsko reservoir (central Poland), we have determined the mathematical correlation, described with a polynomial function, between the mean monthly air temperature and the monthly number of freeze-thaw days (FTD). A freeze-thaw day is a day when the maximum air temperature is above 0 °C while the minimum air temperature equals or is below this threshold. The number of FTDs within the study area averaged 64-71 and demonstrated a downward trend of 2-4 FTDs/10 years. The study period (1951-2018), includes a clearly marked distinct sub-period (1991-2018), when the reservoir was in operation, which experienced 58-68 FTDs. Considering the assumed rise in temperature, one should expect a further, though slightly slower, decline in the future number of FTDs. Depending on the accepted model of the temperature increase, which for the area of Poland (Central Europe) in the perspective of 30 years oscillates between +1.1 to +1.3 °C, the number of FTDs within the study area is expected to decline by -4.5 to -5.3 FTD, i.e. 6-7% and 5.4-5.5 FTD i.e. 8-9% respectively.
| S-EPMC8555500 | biostudies-literature
Project description:The combination of pretreatment and vacuum freeze-drying (VFD) technology is an effective technique for extending the shelf life of apricots, reducing costs and energy consumption. However, the impact of pretreatment on the freeze-drying and quality characteristics of apricots is still unclear. The effects of ultrasound (US), freeze-thaw (FT), and their combination (FT-US) on water migration and quality characteristics of apricot slices on VFD were studied. LR-NMR and SEM showed that pretreatment significantly reduced the time (19.05%-33.33%) and energy consumption (17.67%-35.66%) of the VFD process. Compared with the control group, the US, FT, and FT-US improved the color, texture, rehydration ability, and flavor of apricot slices. Among them, FT-US retained the most biologically active substances and antioxidant capacity, with the highest sensory score. Overall, FT-US pretreatment induced changes in the microstructure and chemistry of apricots, which contributed to the production of high-quality VFD apricot slices.
| S-EPMC11016973 | biostudies-literature
Project description:Freeze-thaw induced fracturing coal by liquid nitrogen (LN2) injection exerts a significant positive effect on the fracture permeability enhancement of the coal reservoir. To evaluate the different freeze-thaw variables which modify the mechanical properties of treated coals, the effects of freezing time, number of freeze-thaw cycles, and the moisture content of coal were studied using combined uniaxial compression and acoustic emission testing systems. Freezing the samples with LN2 for increasing amounts of time degraded the strength of coal within a certain limit. Comparison to freezing time, freeze-thaw cycling caused much more damage to the coal strength. The third variable studied, freeze-thaw damage resulting from high moisture content, was restricted by the coal's moisture saturation limit. Based on the experimental results, equations describing the amount of damage caused by each of the different freeze-thaw variables were empirically regressed. Additionally, by using the ultrasonic wave detection method and fractal dimension analyses, how freeze-thaw induced fractures in the coal was quantitatively analyzed. The results also showed that the velocity of ultrasonic waves had a negative correlation with coal permeability, and the freeze-thaw cycles significantly augment the permeability of frozen-thawed coal masses.
| S-EPMC5473936 | biostudies-literature
Project description:DNA computing harnesses the immense potential of DNA molecules to enable sophisticated and transformative computational processes but is hindered by low computing speed. Here, we propose freeze-thaw cycling as a simple yet powerful method for high-speed DNA computing without complex procedures. Through iterative cycles, we achieve a substantial 20-fold speed enhancement in basic strand displacement reactions. This acceleration arises from the utilization of eutectic ice phase as a medium, temporarily increasing the effective local concentration of molecules during each cycle. In addition, the acceleration effect follows the Hofmeister series, where kosmotropic anions such as sulfate (SO42-) reduce eutectic phase volume, leading to a more notable enhancement in strand displacement reaction rates. Leveraging this phenomenon, freeze-thaw cycling demonstrates its generalizability for high-speed DNA computing across various circuit sizes, achieving up to a remarkable 120-fold enhancement in reaction rates. We envision its potential to revolutionize molecular computing and expand computational applications in diverse fields.
| S-EPMC10456841 | biostudies-literature
Project description:Freeze-thaw cycles in soil are driven by water migration, phase transitions, and heat transfer, which themselves are closely coupled variables in the natural environment. To simulate this complex periglacial process at different time and length scales, a multi-physics model was established by solving sets of equations describing fluid flow and heat transfer, and a dynamic equilibrium equation for phase changes in moisture. This model considers the effects of water-ice phase changes on the hydraulic and thermal properties of soil and the effect of latent heat during phase transition. These equations were then discretized by using the finite volume method and solved using iteration. The open-source software OpenFOAM was used to generate computational code for simulation of coupled heat and fluid transport during freezing and thawing of soil. A set of laboratory freezing tests considering two thermal boundary conditions were carried out, of which the results were obtained to verify the proposed model. In general, the numerical solutions agree well with the measured data. A railway embankment problem, incorporating soil hydrothermal behavior in response to seasonal variations in surface temperature, was finally solved with the finite volume-based approach, indicating the algorithm's robustness and flexibility.
| S-EPMC8174737 | biostudies-literature
Project description:Fruits are essential for a healthy diet, as they contribute to the prevention of cardiovascular diseases and some cancers, which is attributed to their high bioactive compound content contributing to their antioxidant capacity. Nevertheless, fruits have a short shelf life due to their high-water content, and freeze-drying is a well-known technique to preserve their nutritive quality. However, it is an expensive technology, both due to the use of low pressure and long processing time. Therefore, an optimisation of variables such as the freezing rate, working pressure and shelf temperature during freeze-drying may preserve fruit quality while reducing the time and costs. The impact of these variables on colour, porosity, mechanical properties, water content, vitamin C, total phenols, β-carotene, and antioxidant activity of a freeze-dried orange puree was evaluated. The results showed a great impact of pressure and shelf temperature on luminosity, chroma and water content. Vitamin C and β-carotene were more preserved with higher shelf temperatures (shorter times of processing) and lower pressure, respectively. The optimum freeze-drying conditions preserving the nutrients, and with an interesting structural property, perceived as a crunchy product by consumers, are low pressure (5 Pa) and high shelf temperature (50 °C).
| S-EPMC7022254 | biostudies-literature